본 연구는 추가적인 장비 없이 UAV만을 사용한 균열폭 측정 및 균열의 3차원 재구성 방법을 제안한다. UAV 사진측량법 및 CNN을이용한 균열의 3차원 재구성 및 균열폭 측정 검증을 위해 5곳의 균열이 존재하는 벽면을 대상으로 균열의 3차원 재구성을 하였 으며 UAV와 균열 사이의 거리 4가지에 대해 균열폭을 측정하고 균열 현미경 측정값과 비교하여 정확성을 검증하였다. 대부분의 균열 에서 균열폭을 정확히 측정하였으나 균열폭이 0.5mm보다 작은 경우와 벽면이 심하게 그늘져 어두운 곳에서는 측정 유효성이 떨어지 는 결과를 보였다.

Measuring body size with a 3D scanner can reduce inter-measurer variability and provide better accuracy compared to using a traditional methods of measurement (Park, Nam, & Park, 2009). Many size measurement projects (or studies) that measure body size established a size measurement method prior to the development of a 3D scanner and automatic size measurement programs that produce 3D virtual body size measurements (Park, &Nam, 2012). Size data measured through an automatic size measurement program are more accurate and have a lower variability that is more appropriate for body measurements (Han, & Nam, 2004; Nam, Choi, Jung, & Yun, 2004). However, this method is limited to healthy subjects who can maintain a correct posture in a 3D scanner. It is difficult for the elderly to maintain the correct posture for body measurements in ‘Basic Human Body Measurements for Technological Design’ of ISO 7250(1997). Body measurement definitions are based on vertical and horizontal directions consequently, it is hard to measure those with a bent body type even if they stand in a correct posture. Most body measurement items are automatically measured in vertical and horizontal directions because current automatic size measurement programs utilize algorithms based on typical body measurement definitions. The size measurement method based on a vertical and horizontal directions tends to have a problem for elderly individuals with a bent body type who have difficulty maintaining a correct posture for 3D scanning as defined in ISO 7250(1997)(Ashdown, & Na, 2008).This study analyzes the problem of present auto-measurement programs that use elderly’s 3D body scan data. We conducted a comparative analysis of elderly’s body sizes using an auto-measurement program from virtual 3D body scan data and direct measurement with traditional measurement methods. We establish 34 typical body size measurements for the use of data from 464 males and 472 females (total 936) between the ages of 70 to 85. For error analysis, data separated to normal values and outliers compared with ISO 20655(2003). ISO 20685 defines the accuracy of extracted measurements by classification and measurement type (segment lengths, body height/breaths/depth, large/small circumferences, and head/hand/foot dimensions). The majority of outliers for the male and female body height type was “height”. Total number of persons with outliers for Height’s data was 603; consequently, 64.4% of subjects (elderly group of 70-85 yrs.) could not maintain a correct posture when scanning. Other data also had many errors from inaccurate measurement postures. A total of 72.3% of males and 70% of females have incorrect values in small circumferences. The segment lengths’ error data was 76.5% of males and 75% of females; in addition, the head dimension’ outliers were 87% for both male and female subjects. Especially 57.46% of males had incorrect data, while 74.67% of females had a type of large circumference. Female chest circumference had significant errors due to sagging breasts. The differences identify with a correlation between type of large circumference (chest, hip, under bust, waist, waist of omphalion) and gender. There were several correlations between the many measurement errors because values over 70% of data have outliers; however, each measurement type has properties in regards to correlation. A substantial positive correlation was found between all measurements (except hip circumference) in the type of large circumference; in addition, one-way ANOVA indicated that the measurements influenced height and were statistically significant. Outliers found in height data for the elderly’s were more likely to have errors in the type of large circumference. The type of body height indicated a strong correlation and statistical significance between the axilla height and other measurements (height, waist, crotch, lateral malleolus). Axilla height with more outliers indicated that other type of body height measurements had a higher potential for errors. The posture for body measurement was standardized as standing erect; however, this study indicated that many measurement errors were possible between using an auto-measurement program and direct measurement. The value of outlier about a particular measurement item can expect increased errors about any group (height: large circumference group/ axilla height: body height group). We have to study the relation in measurements in these types ‘large circumference’ because ‘head dimensions’ types correlate between measurements in each group. We need a more detailed analysis about outliers to find the major factors for measurement errors in regards to the elderly as well as discuss the possibility of ISO measurement-standard’s application for the elderly.

The necessity of large-area and high-precision measurements has increased in industry area. The high-speed/high-precision multi probe measurement system has been developed to measure the 3D shape. The three different multi probes are combined in measurement system. This system is synchronized between the probes to measure the same position in the sample. Also this paper shows the measurement results with multi probe measurement system.

최근의 디스플레이 기술은 2차원 디스플레이에 제시된 영상으로부터 3차원 깊이감을 지각하는 것을 가능하게 하였다. 이런은 디스플레이와 콘텐츠 기술의 발전에도 불구하고, 사용자는 실생활에서 경험하지 않는 시각피로의 문제를 경험하는데, 이 문제를 해결하기 위해서는 시각피로를 안정적이고 타당하게 측정하는 것이 필요하다. 본 연구의 목적은 EEG(Electroencephalography)신호에 기반한 시각피로 측정의 프로토콜을 개발하고 타당성을 검증하는 것이었다. ERP(Event related potential) 성분 중에서 시각피로를 반영하는 성분을 찾아내기 위해 2D 조건과 3D 조건에서 탐색적 실험을 수행하였고, 탐색적 실험에서 발견된 ERP 성분이 양안시차의 차이에 따라 상이한 특성을 보이는지 검증하기 위하여 확인적 실험을 수행하였다. 실험결과, Cz와 Pz 영역에서 P3 성분의 정점 강도가 2D 조건보다는 3D 조건에서 감소하였으며, 양안시차가 증가할수록 일관되게 P3 성분의 강도가 통계적으로 유의하게 감소하는 것을 확인하였다. 양안시차가 증가함에 따라서 주관적인 시각피로가 통계적으로 유의하게 증가함을 검증하였는데, 이 실험결과는 Cz와 Pz 영역에서의 P3 성분의 정점 강도가 3D 시각피로에 대한 인덱스로 사용할 수 있음을 시사한다.

PRIMOS bodyⓇ 기기를 이용한 얼굴부피 평가법 개발에 관한 연구를 진행하였다. 평가법의 신뢰성을 확인하고자 세 명의 시험자가 마네킹과 사람을 대상으로 얼굴 부피를 측정하였다. 마네킹의 얼굴에 여러 가지 부피의 찰흙을 붙이고, 기기로 얼굴을 측정하였는데, 실제 찰흙의 부피와 측정값 사이에 높은 상관성(R2 = 0.99)이 있는 것으로 나타났다. % RSD와 Gage R&R 분석으로 기기의 정확성, 반복성, 재현성을 확인한 결과 신뢰성이 있는 결과를 얻었다. 이와 같은 평가법을 얼굴 붓기 감소에 영향을 주는 화장품의 효능을 평가하는데 적용하였다. 10명의 건강한 여성을 대상으로 화장품 사용 전후 얼굴의 부피를 측정한 결과, 얼굴의 부피가 감소하는 것으로 나타났다. 이와 같은 결과를 통해 PRIMOS bodyⓇ를 이용한 얼굴 부피 평가법은 인체평가에 유용하게 사용될 수 있을 것으로 보인다.

This paper introduces a novel approach that can provide the three dimensional information about the movement of a spreader by using two CCD cameras and a laser distance measuring unit in order to derive ALS (Automatic Landing System) in the crane used at a harbor. So far a kind of 2D Laser scanner sensor or laser distance measuring units are used as comer detectors for the geometrical matching between the spreader and a container. Such systems provide only two dimensional information which is not enough for an accurate and fast ALS. In addition to this deficiency in performance, the price of the system is too high to adapt to the ALS. Therefore, to overcome these defects, we proposed a novel method to acquire the three dimensional spreader information using two CCD cameras and a laser distance measuring unit. To show the efficiency of proposed method, real experiments are performed to show the improvement of accuracy in distance measurement by fusing the sensory information of the CCD cameras and a laser distance measuring unit.