In this work, subabul wood biomass was used to prepare carbon adsorbents by physical and chemical activation methods at various carbonization temperatures. The properties of the carbon adsorbents were estimated through characterization techniques such as X-ray diffraction, Fourier transform infrared spectroscopy, X–ray photo electron spectroscopy, laser Raman spectroscopy, scanning electron microscopy, CHNS-elemental analysis and N2 adsorption studies. Subabul-derived carbon adsorbents were used for CO2 capture in the temperature range of 25–70 °C. A detailed adsorption kinetic study was also carried out. The characterization results indicated that these carbons contain high surface area with microporosity. Surface properties were depended on treatment method and carbonization temperature. Among the carbons, the carbon prepared after treatment of H3PO4 and carbonization at 800 °C exhibited high adsorption capacity of 4.52 m.mol/g at 25 °C. The reason for high adsorption capacity of the adsorbents was explained based on their physicochemical characteristics. The adsorbents showed easy desorption and recyclability up to ten cycle with consistent activity.

In this study, superior carbon nanotubes (CNT) were chemically modified with itaconic acid (IA) and a polyaniline (PANI) composite was formed and used to remove methylene blue (MB) dye from an aqueous solution. The capacity of CNTs modified with IA (IA/CNT) and composited with PANI (PANI/CNT) to remove MB dye from an aqueous solution was compared and investigated. The effects of parameters such as pH (3–10), adsorbent dose (0.8–8 g/L), initial dye concentration (10–100 mg/L), and temperature (25–55 °C) on MB adsorption were investigated. IA/CNT and PANI/CNT adsorbents were characterized by analyzes such as Fourier Transform Infrared Spectroscopy (FT-IR), Field Emission Scanning Electron Microscopy (FE-SEM), transmission electron microscope (TEM), and Brunauer, Emmett and Teller (BET). It was determined that the isotherm data fit the Langmuir isotherm model. The maximum adsorption capacity (qmax) of PANI/CNT and IA/CNT calculated according to this model (at 25 °C) was 12.78 and 32.78 mg g− 1, respectively. Thermodynamic analysis results showed that the adsorption was exothermic, feasible, and spontaneous. It can be said that the possible mechanism of MB on PANI/CNT and IA/CNT adsorbents occurs with the participation of π–π interaction, electrostatic attraction and hydrogen bonding.

Oysters are the most widely produced shellfish culture in Korea and 90% of their weight. Main component of oyster shell is CaCO3 and an appropriate calcination temperature was derived using thermo-gravimetric analysis. The difference in components for each calcination temperature was confirmed and the adsorbent was manufactured by activation. The oyster shell adsorbent surface area was 5.72m2/g with pores in the mesopore range. The adsorption amount was 37.44 mg/g. Therefore, the possibility of using oyster shell as an adsorbent was confirmed.

Starfish are creatures that destroy marine ecosystems due to their high reproductive rate and predatory nature. Instead of mass incineration, this study attempted to utilize them as functional adsorbents to control odorous organic compounds. This waste starfishbased adsorbent showed a high aldehyde capture efficiency of 91.1%. The maximum specific surface area of the prepared waste starfish adsorbent was 2.19m2/g, and the adsorption amount was 101.66mg/g. Therefore, it was confirmed that the waste starfish had the ability to perform well as an adsorbent.

A porous-carbon material UiO-66-C was prepared from metal–organic frameworks UiO-66 by carbonization in inert gas atmosphere. Physicochemical properties of UiO-66-C materials were well characterized by Powder X-ray diffraction (PXRD), Scanning electron microscope (SEM), Fourier-transform infrared spectroscopy (FT-IR), Raman spectrometer, N2 adsorption/ desorption isotherms (BET), and the adsorption properties of the products were studied UiO-66-C has a high specific surface area up to 1974.17 m2/ g. Besides, the adsorption capacity of tetracycline could reach 678.19 mg/g, the adsorption processes agreed well with the pseudo-second-order kinetic model and Langmuir isotherm model.

The adsorption method that is widely used in the field of odor control generally utilizes activated carbon. However, the development of an economical and efficient adsorbent is required due to the increased use of activated carbon and the high cost of raw materials. Accordingly, the use of waste as a raw material for new adsorbents is attracting attention both in Korea and abroad. In this study, the current status of domestic and overseas waste generation, characteristics of adsorbents, and research trends were investigated, and through this, it was found that a waste-derived adsorbent was an adequate substitute in terms of adsorption capacity and price compared to activated carbon.

Chlorella-derived activated carbon (CDAC) with a high specific surface area and hierarchical pore structure was prepared as a CO2 adsorbent and as a supercapacitor electrode material. During KOH activation of Chlorella-derived carbon, metallic K gas penetrated from the outer walls to the inner cells, and pores formed on the outer frame and the inner surface. Micropores were dominant in CDAC, contributing toward a high specific surface area (> 3500 m2/g) and a hierarchical pore structure owing to the cell walls. Consequently, CDAC exhibited a high CO2 adsorption capacity (13.41 mmol/g at 10 atm and room temperature) and afforded high specific capacitance (142 F/g) and rate capability (retention ratio: 91.5%) in supercapacitors. Compared with woody- and herbaceous-biomass-derived activated carbons, CDAC has a superior specific surface area when the precursors are used without any pretreatment under the same conditions due to their soft components such as lipids and proteins. Furthermore, developing microalgae into high-value-added products is beneficial from both economic and environmental perspectives.

One- and two-dimensional carbon nanomaterials were tested as adsorbents for the elimination of two anionic dyes, reactive red 2 and methyl orange, and the cationic dye methylene blue from aqueous solutions under the same conditions. Carbon nanomaterials performed well in the removal of dyes. Surface oxygenated groups in the nanomaterials improved the cationic dyes’ adsorption, but not the adsorption of the anionic dye. The interactions between nanomaterials and dyes were verified by infrared and Raman spectroscopy. The pseudo-second order kinetic model was better fitted to the kinetic experimental data than the Elovich and pseudo-first order models. The equilibrium adsorption data were best fitted by the Langmuir model. The dimensions and morphology of the carbon nanomaterials play an important role in the adsorption of the three dyes. The main mechanism of adsorption of anionic dyes is by the interactions of the aromatic rings of the dye structures and π delocalized electrons on carbon nanostructures; the adsorption of cationic dye is mainly due to electrostatic interactions.

본 연구에서는 후처리 기능화를 통해 아민이 함유된 ZIF-8-A를 제조하고, 이를 이산화탄소 흡착제로 적용하였다. 첨가한 3-amino-1,2,4-triazole의 함량에 따라 15, 37, 61, 그리고 74 %의 아민기를 포함한 ZIF-8-A를 제조하였으며, 다양한 분석을 통해 이들의 물성특성을 조사하였다. 그 결과, 아민 함량에 따라 ZIF-8-A의 게이트 크기 조절되고 가스 투과도 및 선택도에 영향을 미치는 것을 확인하였다. ZIF-8-A61%는 기존 ZIF-8 대비 CO2/N2 및 CO2/CH4에 대한 선택도가 3.4 및 4.7배 증가하였으며, 이는 구조내 가스 투과를 위한 게이트 사이즈의 조절 및 아민과 이산화탄소의 상호작용에 기인한 것으로 판단하였다.

Environmental treatment residues become valuable waste byproducts like biomass when an environmental infrastructure necessary for recycling is effectively developed. In this study, an environmentally friendly sewage sludge sorbent was developed in a sewage treatment plant by carefully processing the sewage sludge generated from sewage treatment plants. In order to increase the adsorption efficiency, coffee ground waste was added to the adsorbent as an additive and the adsorbate used in the adsorption experiments was acetaldehyde as organic waste. It could be found from the experiment that the adsorbent of the sewage sludge was adsorbed more easily at the carbonization temperature of 600℃. In addition, adsorption experiments showed that the breakthrough time reached to 85, 110, and 130 minutes at 3:1, 2:2, and 1:3, respectively, depending on the content ratio of the sewage sludge and coffee waste. Therefore, the amount of acetaldehyde adsorption increased with the increase in the amount of coffee grounds in the mixture. It could be also be found that the addition of the coffee grounds as an additive to increase the adsorption capacity of the sewage sludge adsorbent is advantageous for adsorption.

Dyes are widely used in various industries including textile, cosmetic, paper, plastics, rubber, and coating, and their discharge into waterways causes serious environmental and health problems. Four different carbon nanostructures, graphene oxide, oxidized multi-walled carbon nanotubes, activated carbon and multi-walled carbon nanotubes, were used as adsorbents for the removal of Nile Blue A (NBA) dye from aqueous solution. The four carbon nanostructures were characterized by scanning electron microscope and X-ray diffractometer. The effects of various parameters were investigated. Kinetic adsorption data were analyzed using the first-order model and the pseudo-second-order model. The regression results showed that the adsorption kinetics were more accurately represented by the pseudo-second-order model. The equilibrium data for the aqueous solutions were fitted to Langmuir and Freundlich isotherms, and the equilibrium adsorption of NBA was best described by the Langmuir isotherm model. This is the first research on the removal of dye using four carbon nanostructures adsorbents.

오염수로부터 자성분리가 가능하며, 방사성 세슘을 효율적으로 제거하기 위한 코발트 페로시아나이드(cobalt ferrocyanide, CoFC) 혹은 니켈 페로시아나이드(nickel ferrocyanide, NiFC)가 도입된 자성입자 흡착제를 제조하였다. Fe3O4 나노 입자는 공침법을 이용해 제조하였고, Co2+와 Ni2+ 이온을 입자 표면에 도입시키기 위해 금속이온과 금속 배위결합(metalcoordination) 을 하는 카르복실기를 포함한 숙신산(succinic acid, SA)을 자성나노입자(magnetic nanoparticles, MNPs) 표 면에 코팅하였다. CoFC와 NiFC는 자성나노입자 표면에 도입된 Co2+ 혹은 Ni2+ 이온이 hexacynoferrate와 결합하여 형성된 다. 제조된 CoFC-MNPs 그리고 NiFC-MNPs는 각각 43.2 emu·g-1, 47.7 emu·g-1의 우수한 포화자화 값을 보여주었다. X- 선 회절분석(XRD), 퓨리에 변환 적외선 분광분석(FT-IR), 나노입자 입도 분석기(DLS), 투과전자현미경(TEM) 등의 분석을 통해 흡착제의 물성을 파악하고, 세슘에 대한 흡착 성능을 알아보았다. 흡착실험을 평가하기 위해 Langmuir/Freundlich 등 온흡착식을 이용해 실험 결과 값을 곡선맞춤 하였고, CoFC-MNPs와 NiFC-MNPs의 최대흡착량(qm)은 각각 15.63 mg·g-1, 12.11 mg·g-1이다. CoFC-MNPs와 NiFC-MNPs는 방사성 세슘에 대해서도 최저 99.09%의 제거율을 가지며, 경쟁이온의 존재에도 방사성 세슘만을 선택적으로 흡착한다.