In this study, Fe3O4/ MgO/Activated carbon composite was used to remove arsenic ion (As (III)) from aqueous media. To this end, Frangula Alnus was used to prepare activated carbon (AC) by calcination in the furnace at 700 °C for 4 h and was then used to synthesize the MgO/Fe3O4/AC composite. To study the surface properties of the composite, various analyses such as SEM, EDX/Mapping, FTIR, DLS, BET and VSM were applied. According to the BET analysis, the specific surface area and average pore size of the Fe3O4/ MgO/AC composite were obtained as 190.92 m2/g and 7.57 nm, respectively, which showed that the aforementioned nanocomposite had a mesoporos structure with an excellent specific surface area. Also, VSM analysis indicated that the composite had a superparamagnetic property and could be easily separated from the solution by a magnet. Moreover, the results of the As (III) sorption indicated that the highest uptake efficiency was obtained 96.65% at pH = 7, adsorbent dosage = 0.13 g/L, t = 35 min, T = 45 °C and Co = 6 mg/L. In addition, the pseudo-second-order model could better describe the kinetic behavior of the sorption process. Furthermore, Langmuir model was the best model to describe the equilibroium behavior of the As(III) ion sorption. Besides, according to the the thermodynamic study, enthalpy change and entropy change were obtained 58.11 kJ/mol and 224.49 J/mol.K, respectively, indicating that the sorption process was spontaneous and endothermic. According to the results, the Fe3O4/ MgO/AC composite was a good adsorbent with the extraordinary properties, which can be used on an industrial scale.

본 연구에서는 활성탄소를 이용하여 해양환경으로 유출된 침강 HNS를 현장에서 대응하기 위한 기술 개발을 목적으로, 활용 가능한 활성탄소의 조건을 검토하고 예상 소요량을 산출하였다. 입자 크기별 7종의 활성탄소들을 대상으로 침강 속도를 측정하였고, 침강 HNS로 분류된 클로로포름(CHCl3)에 대한 흡착용량을 실험실 규모 실험(lab-scale test)으로 측정하였다. 또한 7종 활성탄소들에 대하여 유해 물질함량과 용출 실험을 실시하여 용출된 유해물질 함량을 정량 분석하였다. 평균 침강속도(Mean particle-settling velocity)는 0.5~8 cm/sec의 범위로 8-20 mesh 경우를 제외하고 입자의 크기가 클수록 침강속도가 빨랐으며, 클로로포름에 대한 흡착효율은 대체로 입자가 작을수록 표면적이 넓어져 증가되었다. 또한 현장 투입 후 2차 오염가능성 확인을 위한 유해물질함량과 용출 실험 실험에서 >100 mesh의 활성탄소는 전함량분석결과가 아연(Zn)과 비소(As)가 수처리제기준보다 높고, 용출실험결과에서도 크롬(Cr), 아연(Zn), 비소(As)가 다른 활성탄소에 비해 높은 농도로 용출되었다. 흡착효율, 침강속도, 유해성분 용출량 등을 종합적으로 고려하여 현장 처리 적용 가능한 활성탄소는 20-60, 20-40, 2mm&down mesh 이었으며, 흡착용량을 최우선으로 판단하여 투입물량을 계산하면 최소 현장 투입 물량은 각각 0.82, 0.90, 1.28 ton/㎘ 이다.

Most heavy metals are well-known toxic and carcinogenic agents and when discharged into wastewater represent a serious threat to the human population and the fauna and flora of the receiving water bodies. The present study aims to develop a procedure for Pb (II) removal. This procedure is based on using powdered activated carbon, which was prepared from walnut shells that were generated as plant wastes and modified with potassium carbonate and phosphoric acid as chemical agents. The main parameters, such as effect of pH, effect of sorbent dosage, Pb (II) concentrations, and various contact times influence the sorption process. The experimental results were analyzed by using Langmuir, Freundlich, Tempkin, and Dubinin-Radushkevich adsorption models. The kinetic study of Pb (II) on activated carbon from walnut shells was performed based on pseudo- first order and pseudo- second order equations. The data indicate that the adsorption kinetics follow the pseudo- second order rate. The procedure was successfully applied for Pb (II) removal from aqueous solutions.

Most heavy metals are well-known toxic and carcinogenic agents and when discharged into wastewater represent a serious threat to the human population and the fauna and flora of the receiving water bodies. The present study aims to develop a procedure for Pb(II) removal. The study was based on using powdered activated carbon, which was prepared from walnut shells generated as plant wastes and modified with potassium carbonate or phosphoric acid as chemical agents. The main parameters, such as effect of pH, effect of sorbent dosage, Pb(II) concentrations, and various contact times influence the sorption process. The experimental results were analyzed by using Langmuir, Freundlich, Tempkin and Dubinin-Radushkevich adsorption models. The kinetic study of Pb(II) on activated carbon from walnut shells was performed based on pseudo-first order and pseudo-second order equations. The data indicate that the adsorption kinetics follow the pseudo-second order rate. The procedure was successfully applied for Pb(II) removal from aqueous solutions.

본 논문은 다양한 시설내에 적은 농도의 CO2 제거를 위한 선택적 CO2 흡수능력을 향상시킨 흡착제의 효율평가에 관한 것이다. 직경 4mm의 구형 흡착제는 시판용 제올라이트에 첨가제, 물, 바인더, LiOH를 섞어 제조하였다. 칼럼테스트에서 400분 이내에 90% 이상의 CO2흡착효율을 나타내었고, 흡착필터모듈 흡착능력을 평가하기 위해 회분식과 연속식타입의 챔버테스트가 시행되었다. 회분식테스트에서 30분 이내에 약 92%의 CO2가 제거되는 것을 확인하였다. 연속식테스트에서 30분 이내 70%의 CO2가 제거효율을 보였으며, 2,500ppm 이상의 CO2가 제거되는 것을 확인하였다. 재현성테스트를 수차례 수행한 결과 15일동안 1,000ppm 이상의 CO2가 연속적으로 제거됨을 보였다. TGA 분석법을 이용한 흡착량 분석에서 흡착제 g당 5.0mmol의 CO2를 흡착하는 것으로 나타났다. 본 연구에서 개발된 흡착제는 상온에서 저농도 CO2 실내환경에 적용가능한 것으로 판단된다.

The objective of this study is to manufacture an efficient activated carbon fiber (ACF) assemblies filter. Cellulose acetate and phenolic resin were dissolved in acetone and coated on a 2 cm-long and 2 cm-wide stainless steel mesh. Various concentrations of cellulose acetate and phenolic resin in acetone solution were examined for the extent of coating on the stainless steel mesh using a thermogravimetric analyzer (TGA), a surface area analyzer (BET) and a microscope. As a result, the best quality of coating on the stainless steel mesh was obtained with 2 wt,% cellulose acetate and 10 wt,% phenolic resin in acetone solution. The ACF filter was also impregnated with ZnCl2, KOH, H3PO4 and Na2CO3, respectively to enhance its adsorption capacity. Iodine number increased by impregnating with the chemical compound in the following order: KOH > ZnCl2> Na2CO3> H3PO4. Iodine numbers for the ACF filters impregnated with ZnCl2 (ACFz) and KOH (ACFK) were found to be 972 ~ 1,117 mg/g and 987 ~ 1,183 mg/g respectively.