In nuclear fuel development research, consideration of the back-end cycle is essential. In particular, a review of an in-reactor performance of nuclear fuel related to the various degradation phenomena that can occur during spent fuel dry storage is an important area. The important factors affecting the degradation of zirconium-based cladding during dry storage are the cladding’s hydrogen concentration and rod internal pressure after irradiation. In this study, a preliminary analysis of the in-reactor behavior of the HANA cladding, which has been developed and is currently undergoing licensing review, was performed, and based on this result, a comparative analysis between nuclear fuel with HANA cladding and current commercial fuel under storage conditions was performed. The results show that the rod internal pressure of nuclear fuel with HANA cladding is not significantly different from that of commercial cladding, and the hydrogen concentration in the cladding tends to reduce due to the increased corrosion resistance, so fuel integrity in a dry storage conditions is not expected to be a major problem. Although the lack of cladding creep data under dry storage conditions, the results from the Halden research reactor test comparing in-reactor creep behavior with Zircaloy-4 showed that there is sufficient margin for degradation due to creep during storage.

In order to construct and operate the dry storage systems, it is essential to confirm the safety of the systems through safety analysis. If the dry storage cask is damaged due to an accident, a large amount of radioactive material may be leaked to the outside and cause radiation exposure to surrounding workers and nearby public, so the effect thereof should be evaluated. Many input parameter are required in the confinement evaluation for accident condition, and in this study, the change in the confinement evaluation result according to the change of major input parameter is to be studied. In this study, we selected fractions of radioactive materials available for release from spent fuel, cooling time, and distance to exclusive area boundary as the major input parameter. In general, the release fraction suggested by NUREG-1536 has been used, but NUREG-2224 provides the fraction for high burn-up spent fuel in fire and impact accident conditions, unlike NUREG-1536 which provide a single value. In the case of the distance to exclusive area boundary, 100 to 800 m was considered, and in the case of the cooling time, 10 to 50 years was considered in this study. In order to compare the dose change by the parameter, we set up the hypothetical storage system. A storage cask of the system contain 21 PWR spent fuel assemblies with an initial enrichment of 4.5wt%, burnup of 45,000 MWD/MTU. During the accident condition, it is assumed that the cask is leaked at 1.0×10−7cm3·sec−1. Since the main dose criterion for accident conditions is 50 mSv of effective dose, effective doses are calculated in this study. In an accident condition, transuranic particulate contribute most of the doses, so the doses are determined according to the fraction for the particulate. Therefore, it was confirmed that the dose was almost the same as the fraction for the accident conditions in NUREG-1536 and the fraction for the impact accident conditions in NUREG-2224 is 3×10−5, but the dose was also 100 times higher as the fraction for the fire accident conditions in NUREG-2224 is 3×10−3. In the case of the cooling time, it was confirmed that the dose change according to the cooling time was not significant because the dose contribution of transuranic elements having very long half-life was very large. In the case of the distance, it was confirmed that the dose decreased exponentially as the atmospheric dispersion factor decreased exponentially with the distance.

Currently, the interim storage pools of spent fuels in South Korea are expected to become saturated from 2024. It is required to prepare an operation plan of a domestic dry storage facility during a long-term period, with the researches on safety evaluation methods. This study modified the FRAPCON code to predict the spent fuel integrity evaluation such as the axial cladding temperature, the hoop stress and hydrogen distribution in dry storage. The cladding temperature in dry storage was calculated using the COBRA-SFS code with the burnup information which was calculated using the FRAPCON code. The hoop stress was calculated using the ideal gas equation with spent fuel information such as rod internal pressure. Numerical analysis method was used to calculate the degree of hydrogen diffusion according to the hydrogen concentration and temperature distribution during a dry storage period. Before 50 years of dry storage, the cladding temperature and hoop stress decreased rapidly. However, after 50 years, they decreased gradually and the cladding temperature was below 400 K. The initial temperature distribution and hydrogen concentration showed a parabolic line, but hydrogen was transferred by the hydrogen concentration and temperature gradient over time.

The objective of this study was to investigate changes in drying yield, pH, water activity, microbial growth, and storage stability of bottom rounds of Hanwoo beef under four different dry-aging treatments (T1–T4) as temperature (2~4℃), relative humidity (65~86%) and dry-aging period (20~90 d). The drying yield decreased by 83.13–97.05% as the drying period increased. Among the four treatments, there were no significant differences in drying yield after 60 d of dry-aging. The total plate aerobic counts (TPC) increased by 1.07–4.39 log colony-forming units (CFU)/g as the dry-aging period increased. Of the four treatments, T4 at 40, 60, and 90 d had significantly higher TPCs than those observed for the other treatments on the same days (p<0.05). As the period of dry-aging increased, pH values increased by 5.35– 5.88 for knuckle and 5.34–5.62 for sirloin muscle, and water activity values decreased. For knuckle and sirloin muscle, the water activity values at 40 d and 60 d of T1 and T4 were significantly higher than those of the other treatments on the same days (p<0.05). The thiobarbituric reactive substances and volatile basic nitrogen values of the aged products increased as the dry-aging period increased. The results of this study showed that dry-aging conditions such as those in the T2 or T3 treatments (with a gradual increase in temperature and humidity) for less than 60 d would be best for yield, reduction of microbial growth and storage stability by dry the muscle surface quickly at the beginning period. Further research should include meat quality and economic analysis for these conditions that examines the benefits of these dry-aged products for the end processor.

Background : Angelica dahurica Bentham et Hooker, Angelica gigas Nakai, Ostericum koreanum Maximowicz and Peucedanum japonicum Thumberg　are a major medicinal plant in north Geungbuk province. Using medicinal plants are impotant it`s ingredient. Dry condition and stroage method are not standard manual. The ingredient variation of dry condition and stroage method were not researched. Methods and Results : Using plant material were cutivated on Gyongsangbukdo Bonghwa area. It were studied ingredient variation after dry and storage condition by HPLC methods. Major ingredient of Angelica gigas Nakai are decurusin, decurusinangelate. Heated air bulk dry get more decursin than natuarl dry and decurusinangelate of natural bulk dry was higher than heated air bulk dry. Major ingredient of Ostericum koreanum Maximowicz are imperatorin and isoimperatorin.. Imperatorin of Ostericum koreanum was highest peak on 50℃ heated-air dry after plastic bag sorage and isoimperatorin was highest peak on 40℃ heated-air dry after mountain cultivation. Imperatorin is a major ingredient Angelica dahurica Bentham et Hooker. Heated air bulk dry get more decursin and decursinangelate than natuarl dry and small heated-air dry. Peucedanol-7o_glucoside is a major ingredient Peucedanum japonicum Thumberg. Natural bulk dry get more peucedanol-7o_glucoside than heated-air bulk dry. Conclusion : Ingredient of Angelica dahurica Bentham et Hooker, Angelica gigas Nakai, Ostericum koreanum Maximowicz are different under various cutivation, drying method, storage. Diffent Ingedients of Angelica gigas Nakai, Ostericum koreanum Maximowicz were not accord it’s optical conditon.