A method of functionalization of multi-walled carbon nanotube (MWNT) at room temperature using dry ozone gas is described. The resulting MWNT were characterized by Fourier transform infrared, x-ray photoelectron spectroscopy, and scanning electron microscopy. Combined to these analyses and solubility in liquids, it could be concluded that the dry ozone gas exposure introduces polar functional groups such as carboxylic groups to MWNT similar to acidic modification of MWNT. Particularly, the stable dispersion of MWNT in water after ozone treatment above a critical level could be obtained, implying potential bio-application. The hydrophilic functional groups on the MWNT introduced by ozone oxidation were helpful in improving the interaction with functional groups in PA6 such as -NH2 and -CONH- resulting in improved mechanical properties.

Through the electrostatic interaction between the poly-diallydimethylammonium chloride (PDDA) modified Multi-walled carbon nanotube (MWNT) and SnO2 suspension in 1mM NaNo3 solution, MWNT-SnO2 nanocomposites (MSC) for anode electrodes of a Li-ion battery were successfully fabricated by colloidal heterocoagulation method. TEM observation showed that most of the SnO2 nanoparticles were uniformly deposited on the outside surface of the MWNT. Galvanostatic charge/discharge cycling tests showed that MSC anodes exhibited higher specific capacities than bare MWNT and better cyclability than unsupported nano-SnO2 anodes. Also, after 20 cycles, the MSC anode fabricated by heterocoagulation method showed more stable cycle properties than the simply mixed MSC anode. These improved electrochemical properties are attributed to the MWNT, which adsorbs the mechanical stress induced from volume change and increasing electrical conductivity of the MSC anode, and suppresses the aggregation between the SnO2 nanoparticles.

Multi-walled carbon nanotube (MWNT)/SnO2 nano-composite (MSC) for the anode electrode of a Li-ion battery was prepared using a homogeneous precipitation method with SnCl2 precursors in the presence of MWNT. XRD results indicate that when annealed in Ar at 400˚C, Sn6O4(OH)4 was fully converted to SnO2 phases. TEM observations showed that most of the SnO2 nanoparticles were deposited directly on the outside surface of the MWNT. The electrochemical performance of the MSC electrode showed higher specific capacities than a MWNT and better cycleability than a nano-SnO2 electrode. The electrochemical performance of the MSC electrode improved because the MWNT in the MSC electrode absorbed the mechanical stress induced from a volume change during alloying and de-alloying reactions with lithium, leading to an increase in the electrical conductivity of the composite material.

Multi-walled carbon nanotube-poly methyl methacrylate (MWNT/PMMA) nanocomposite has been prepared by in situ polymerization of MMA dispersed with MWNTs. The MWNTs were functionalized by nitric acid and sulfuric acid treatment, and this was confirmed by FTIR spectrometer. The solution mixture of MWNTs and MMA was partially polymerized at 80℃, followed by the addition of AIBN and polymerization at 50℃. The MWNT-PMMA composite was prepared by casting the pre-polymer on the glass plate, and the optical properties have been studied using UV-vis spectrometer. The acid treated MWNTs were well dispersed in MMA with fairly good dispersion stability, while flocculation and sedimentation was observed from raw MWNTs in MMA.

The purpose of this experimental study is to investigate the application of materials of construction with MWNT and TiO2. high performance nano MWNT-TiO2 carrier was fabricated by sol-gel method and performance analyzed by XRD and SEM. As a result, high performance nano MWNT-TiO2 carrier was no significant differences in coating state, crystallinity and microstructure.

The purpose of this experimental study is to investigate the application of materials of construction with MWNT and TiO2. high performance nano MWNT-TiO2 carrier was fabricated by sol-gel method and performance analyzed by XRD and SEM. As a result, high performance nano MWNT-TiO2 carrier was no significant differences in coating state, crystallinity and microstructure.