In recent times, there has been a significant demand for supercapacitors in energy storage applications due to their rapid charging– discharging capabilities, high power density, and excellent stability. Nevertheless, the synthesis of electrode materials with a substantial surface area, exceptionally high porosity, and superior electrochemical performance is still challenging. Activated carbons with a distinctive porous structure and exceptional electrochemical properties emerged as promising electrode materials for supercapacitors. In this study, we used a porous activated carbon (PAC) derived from petroleum coke followed by KOH activation as an efficient anodic electrode material. The ultra-high Brunauer–Emmett–Teller surface area of 2105.6 m2 g− 1 with stacked layers of carbon atoms arranged in a two-dimensional hexagonal structure makes the PAC an efficient candidate for a supercapacitor electrode. The PAC delivers a specific capacitance of 470 F g− 1 at a current density of 0.5 A g− 1 over a potential window of 0 to −1 V. The excellent cycling stability in a three-electrode setup with a capacitance retention of ⁓98% even at a high current density of 10 A g− 1 makes the PAC a potential anodic electrode material for high-performance supercapacitor applications.

The production of macroalgae-derived adsorbent is of great importance to realize the idea of treating pollutants with invaluable renewable materials. Herein, a novel meso-micro porous nano-activated carbon was prepared from green alga Ulava lactuca in a facile way via chemical activation with zinc chloride. The resultant activated carbon possesses a significant specific surface area 1486.3 m2/ g. The resulting activated carbon was characterized and investigated for the adsorption of Direct Red 23 (DR23) dye from an aqueous environment. Batch method was conducted to study the effects of different adsorption processes on the DR23 dye adsorption from water. Isotherms and kinetics models were investigated for the adsorption process of DR23 dye. It was found that the adsorption data were well fitted by Langmuir model showing a monolayer adsorption capacity 149.26 mg/g. Kinetic experiments revealed that the adsorptions of DR23 dye can be described with pseudo-secondorder model showing a good correlation (R2 > 0.997). The prepared activated carbon from Ulava lactuca was exposed to a total of six regeneration experiments. The regeneration result proved that the fabricated activated carbon only loses 19% of its adsorption capacity after six cycles. These results clearly demonstrated the high ability of the obtained active carbon to absorb anionic dyes from the aqueous environment.

Cost-effective and sustainable high-performance supercapacitor material was successfully prepared from cellulosic waste (Sapindus trifoliatus nut shells) biomass-derived activated carbon (CBAC) by physical activation method. The CBAC displays nanofiber morphology, high specific surface area (786 m2/ g), large pore volume (0.212 cm3 g− 1) which are evaluated using FESEM, BET and possessed excellent electrochemical behavior analyzed through various electrochemical methods. Moreover, the assembled symmetric CBAC//CBAC device exhibits high specific capacitance of 240.8 F g− 1 with current density of 0.2 A g− 1 and it is maintained to 65.6 F g− 1 at high current density of 2.0 A g− 1. In addition, the symmetric device delivers an excellent specific energy maximum of over 30 Wh kg− 1 at 400 W kg− 1 of specific power and excellent cycling stability in long term over 5000 cycles. The operation of the device was tested by light-emitting diode. Hence, CBAC-based materials pave way for developing large-scale, low-cost materials for energy storage device applications.

Effective processing and use of coal slime is of great significance to protect the environment and save resources. Different coal slimes (untreated with 43 wt% ash content, crushed and flotation treated with 10 wt% ash content, and pre-carbonized) were activated with KOH to prepare porous activated carbon. The results show the activated carbon prepared from coal slime with 10 wt% ash had high specific surface area (3037 m2/ g) and pore volume (1.66 cm3/ g), which was ascribed to the suitable contents of minerals as template and oxygen-containing functional groups. Electrochemical measurements exhibited the best specific capacitance of 220 F/g at 0.1 A/g and the cycle stability of over 100% capacitance retention after 1000 cycles at 5 A/g in 6 M KOH solution. Due to the high specific surface area, superior electrochemical performance, and facile and low cost, developing highly porous activated carbon for supercapacitors is one alternative way for effective use of coal slime waste.

본 연구에서는 다공성 활성탄소와 금속유기골격체 복합재료 기반의 전극 재료와 “이온젤” 이라고 불리는 고분자 고체 전해질을 이용하여 슈퍼커패시터를 제작 하였으며, 금속유기골격체의 함량에 따른 전기화학적 거동을 관찰하여 보았다. 슈퍼커패시터의 전기화학적 특성은 순환전압전류법(CV), 전기화학적 임피던스 분광법(EIS) 및 전정류 충·방전법(GCD)으로 분석하였으며, 그 결과로, 다공성 활성탄소 대비 금속유기골격체를 0.5 wt% 첨가 하였을 때 가장 높은 전기용량값을 확인 할 수 있었으며, 0.5 wt% 이상의 금속유기골격체의 함유량은 전기화학적 특성 감소에 영향을 주는 것으로 사료되며, 이러한 결과를 바탕으로 제조된 다공성 활성탄소/금속유기골격체 복합재료 기반의 슈퍼커패시터는 다양한 분야에 활용이 가능 할 것으로 판단된다.

본 연구에서는 “이온젤” 이라고 불리는 고분자 기반의 PVA(polyvinyl alcohol) 기반의 고체 전 해질에 이온성 액체 BMIMBF4 (1-buthyl-3-methylimidazolium tetrafluoroborate)를 첨가하여 제조한 전 고체 전해질과 활성탄소와 금속유기골격체 복합재료 기반의 전극 재료를 이용하여 슈퍼커패시터를 제작 하였으며, 유기골격체의 유 무에 따른 전기화학적 특성을 분석하여 보았다. 슈퍼커패시터의 전기화학적 특 성은 순환전압전류법(CV), 전기화학적 임피던스 분광법(EIS) 및 전정류 충·방전법(GCD)을 통하여 비교 및 분석하여 보았다. 그 결과로, 금속유기골격체가 함유되지 않은 슈퍼커패시터의 전기용량값은 380 F/g 으로 확인 할 수 있었고, 이 값은 금속유기골격체를 첨가하였을 때 340 F/g로 감소하는 현상을 확인할 수 있었 다. 이러한 결과로 1 wt%의 금속유기골격체의 함유량은 전기화학적 특성 감소에 영향을 주는 것으로 사료 되며 이러한 결과를 바탕으로 금속유기골격체의 첨가량을 최적화 할 필요가 있다고 판단된다

Because of their excellent stability and highly specific surface area, carbon based materials have received attention as electrode materials of electrical double-layer capacitors(EDLCs). Biomass based carbon materials have been studied for electrode materials of EDLCs; these materials have low capacitance and high-rate performance. We fabricated tofu based porous activated carbon by polymer dissolution reaction and KOH activation. The activated porous carbon(APC-15), which has an optimum condition of 15 wt%, has a high specific surface area(1,296.1 m2 g−1), an increased average pore diameter(2.3194 nm), and a high mesopore distribution(32.4 %), as well as increased surface functional groups. In addition, APC has a high specific capacitance(195 F g−1) at low current density of 0.1 A g−1 and excellent specific capacitance(164 F g−1) at high current density of 2.0 A g−1. Due to the increased specific surface area, volume ratio of mesopores, and surface functional groups, the specific capacitance and high-rate performance increased. Consequently, the tofu based activated porous carbon can be proposed as an electrode material for high-performance EDLCs.

In this study, synthetic viscose rayon fabric has been used for preparing activated carbon fabric (ACF), impregnated with different concentrations of H3PO4. The effect of H3PO4 im-pregnation on the weight yield, surface area, pore volume, chemical composition and mor-phology of ACF were studied. Experimental results revealed that both Brunauer-Emmett-Teller surface area and micropore volume increased with increasing H3PO4 concentration; however, the weight yield and microporosity (%) decreased. It was observed that samples impregnated at 70°C (AC-70) give higher yield and higher microporosity as compared to 30°C (AC-30). The average pore size of the ACF also gradually increases from 18.2 to 19 and 16.7 to 20.4 Å for 30°C and 70°C, respectively. The pore size distribution of ACF was also studied. It is also concluded that the finalACF strength is dependent on the concentra-tion of impregnant.

Potassium hydroxide-activated carbons (CK21, CK11, and CK12) were prepared from pis-tachio nutshells. Physicochemical properties of activated carbons were characterized by TGA, pHpzc, Fourier transform infrared spectroscopy, scanning electron microscopy, and N2-adsorption at -196°C. The examinations showed that activated carbons have high sur-face area ranging between 695-1218 m2/g, total pore volume ranging between 0.527-0.772 mL/g, and a pore radius around 1.4 nm. The presence of acidic and basic surface C-O groups was confirmed.Batch adsorption experiments were carried out to study the effects of adsorbent dosage, temperature, initial concentration of adsorbate, and contact time on deltamethrin adsorption by activated carbons. The kinetic studies showed that the adsorp-tion data followed a pseudo-second order kinetic model. The Langmuir model showed a maximum adsorption capacity of 162.6 mg/g at 35°C on CK12. Thermodynamic studies indicated that adsorption was spontaneous and increased with temperature, suggesting an endothermic process.