표고버섯은 톱밥배지 재배기술의 발달로 세계적으로 가장 많이 생산되고 식용되는 버섯이며, 톱밥배지를 이용하여 재배된 표고버섯의 생산량이 늘고 있다. 본 연구에서는 톱밥재배 표고버섯의 품종별 식품학적 차이를 비교하고자 동일 조건에서 재배된 산조701호, 산조707호, 산조715호, 참아람, L808 총 5품종 표고버섯의 일반성분, 영양성분 및 항산화 활성을 분석하였다. 동결건조된 표고버섯의 일반성분 함량은 회분 4.06~5.92 g/100 g, 조지방 0.75~1.02 g/100 g으로 품종별 차이가 크지 않았으나 조단백질은 21.24~29.15 g/100 g으로 품종간의 유의적 차이를 보였다. Trehalose는 산조701호에서 9.60±0.08 g/100 g 으로 가장 높은 함량으로 확인되었다. 총 아미노산 조성은 glutamic acid>aspartic acid>leucine 순으로 높은 분포를 보였으며, 유의적 차이를 보인 아미노산은 glycine, alanine, valine, isoleucine, leucine, phenylalanine이었으며 산조707 호, 산조715호, 산조701호, 참아람, L808 순으로 높은 함량을 보였다. 물 추출물의 총 폴리페놀 함량과 총 플라보노이드 함량은 산조715호가 3.49±0.04 mg GAE/g, 1.33±0.03 mg QE/g으로 가장 높게 나타났으며 다른 품종 들과 유의적 차이를 나타내었다. 같은 톱밥배지와 환경에 서 재배된 표고버섯 5 품종간의 유의적 차이가 확인된 성분은 조단백질, trehalose, 6종의 아미노산이었다. 하지만 한 곳의 임가에서 재배된 표고버섯 품종간의 비교 결과로, 품종별 시료 수를 확대한 추가실험을 통하여 품종 간의 구별 가능성을 더욱 세부적으로 검토할 필요가 있다.

느타리 종균배지재료인 미송톱밥과 미강을 대체할 수 있는 재료를 선발하기 위하여 실시하였다. 톱밥의 pH는 4.9~6.1, 총질소함량은 0.21~0.26%, 총탄소함량은 49.0~50.2%를 나타내며 조지방은 0.3~0.7%를 함유하고 있다. 종균 혼합배지의 pH는 5.3~5.9, 총질소함량은 0.65~1.11%, 총탄소함량은 47.0~49.1%를 나타내었다. C/N율은 총질소 함량이 낮은 미루나무톱밥 혼합배지에서 높게 나타났으며, 단백질 함량은 미송톱밥이 함유되어 있는 배지에서 높게 나타났다. 느타리 균사생장은 미강보다 밀기울이 포함되어 있는 배지에서 균 사생장 속도가 빨랐다. 수량은‘곤지7호’, ‘춘추2호’, ‘흑타리’, ‘수한1호’ 순으로 높았으며, T4(미루나무톱밥:참나무톱 밥:미강) 배지에서 가장 높은 생산성을 나타내었으나 처리 간 유의성이 없었다. 느타리 농가에서는 자가종균 제조 시 주변에서 손쉽게 구할 수 있는 미루나무톱밥, 참나무톱밥을 단용 및 혼용으로 이용할 수 있으며, 보관중에 품질유지가 어려운 미강 대신에 밀기울을 사용하여 종균을 제조할 수 있을 것으로 판단된다.

Shiitake culture in sawdust is a widely applied method, which can supplement the disadvantages of costly and time consuming oak log cultivation. In sawdust cultivation, browning of surface mycelia is an important stage for the productivity and longevity of sawdust media. Surface browning forms protection coat for the substrate, which can block the invasion of outer pathogens and suppress water evaporation in the substrate. We controlled different light source (red LED, white LED, blue LED, and fluorescent light) with different intensity of illumination (1.5, 10.5, 20.5 μmol/m2s for LEDs and 10, 100, 300 lux for fluorescent light) to induce browning. Lights were treated with 1 hour on/ 1 hour off cycle maintained in a controlled room with 20℃ temperature, 60% humidity, and 1200 ppm CO2 atmosphere concentration for 60 days. Browning effect differed from the source and intensity of illumination. Browning was most effective in 1.5 μmol/m2s for red and blue LED. All light sources showed less browning in highest intensity of illumination, which indicates that higher than 20.5 μmol/m2s for LEDs or 300 lux for fluorescent light are not effective. After harvesting fruit bodies, we measured their weight, length and width of pileus and stipe, chromaticity, and hardness. Treatment with 1.5 μmol/m2s blue LED produced the best harvest with highest average individual weight (21.2g), stipe length (30.8 mm), and hardness (377.9 g) with fine length and width of pileus, and chromaticity. This results indicate that 1.5 μmol/m2s blue LED showed the best browning effect which resulted in the best harvest yield.

검은비늘버섯 병재배용 다수성 톱밥 배지 조성을 구명하고자 5종의 혼합배지 조성에 대하여 재배적 특성을 조사한 결과는 다음과 같다. 전체 재배기간은 참나무톱밥에 비트펄프, 면실박이 포함된 배지에서 배양일수는 다소 길고, 초발이 소요일수는 짧고 생육일수는 긴 경향을 보여, 포플러톱밥+쌀겨(8:2) 처리에 비해 3-5일 길었다. 유효경수와 병당 수량이 높은 참나무톱밥+비트펄프+면실박(5:3:2)와 참나무톱밥+비트펄프+면실박+콘코브(3:2:2:3) 처리에서 참나무톱밥+쌀겨(8:2, 대조구)에 각각 33%, 12% 증수되었다. 전체 재배기간과 수량을 고려할 때 검은비늘버섯 병재배용 다수성 배지로 참나무톱밥+비트펄프+면실박(5:3:2)이 가장 적합하였다.

From the used sawdust medium of commercial mushroom, Lyophyllum ulmarium and Pleurotus eryngii, cellulase was extracted by distilled water. Optimum temperature of extraction was 25 ℃. Cellulase including this medium could attack cellulose powder, wood tip of a Japan ceder and cypress, and rice hull. Both cellulase from Lyophyllum ulmarium and Pleurotus eryngii showed high activities for rice hull. Now, by affinity chromatography, these cellulase is tried to purify.

In order to develop of practical model of the sawdust cultivation of Lentinula edodes, we conducted experiments of the sawdust cultivation in different conditions of cultivation environment and shapes of sawdust medium. For different types of cultivation environments, we provided environmental control system facility, vinyl house and forest cultivation. We also chose the 2.6kg cylindrical type and the 1.5kg cylindrical type for shapes of medium. We decided cultivation on shelves for the 2.6kg cylindrical type sawdust medium and cultivation on the ground for the 1.5kg cylindrical type sawdust medium to cultivate the mushroom. The result showed that forest cultivation was the first place cultivated mushroom followed by environmental control system facility and cultivation vinyl house. Among 2 types of sawdust medium, the 1.5kg cylindrical type showed better quantity in terms of a fruit body of mushroom.

This study was carried out to obtain basic data on physiological characteristics for an artificial cultivation of Grifola frondosa. Ten strains of G. frondosa were collected from Korea, China and Japan and those were isolated and tested. PDA medium was selected for the favorable culture medium. The optimal conditions for the mycelial growth of G. frondosa were 25℃ and pH 4∼5 respectively. The carbon and nitrogen sources for the optimum mycelial growth were fructose and peptone, respectively. Highest mycelial growth was observed when the C/N ratio was 10∼20. Significant differences among lines were found for production yield and crop cycle time. KME44009 had a short spawn run time, high yield, good color and quality compare with other strains. To find out the suitable medium composition of G. frondosa, physicochemical conditions were investigated. The T2 formulation (55:25:8:12 mixing ratio of oak sawdust, oak chip, wheat bran and soybean cake) showed the shortest time to complete the crop cycle and the highest yields(weight of fresh mushrooms harvested at maturity). Among the physicochemical factors, pH, crude oil and total nitrogen may affect mushroom yield. Therefore, development of suitable medium would benefit from increased production efficiency of G. frondosa mushrooms and be commercial potential.

This study was carried out to obtain basic data on physiological characteristics for an artificial cultivation of Grifola frondosa. Ten strains of G. frondosa were collected from Korea, China and Japan and those were isolated and tested. PDA medium was selected for the favorable culture medium. The optimal conditions for the mycelial growth of G. frondosa were 25℃ and pH 4～5 respectively. The carbon and nitrogen sources for the optimum mycelial growth were fructose and peptone, respectively. Highest mycelial growth was observed when the C/N ratio was 10～20. Significant differences among lines were found for production yield and crop cycle time. KME44009 had a short spawn run time, high yield, good color and quality compare with other strains. To find out the suitable medium composition of G. frondosa, physicochemical conditions were investigated. The T2 formulation(55:25:8:12 mixing ratio of oak sawdust, oak chip, wheat bran and soybean cake) showed the shortest time to complete the crop cycle and the highest yields(weight of fresh mushrooms harvested at maturity). Among the physicochemical factors, pH, crude oil and total nitrogen may affect mushroom yield. Therefore, development of suitable medium would benefit from increased production efficiency of G. frondosa mushrooms and be commercial potential.

This study was undertaken to examine the feasibility of black locust (Robinia pseudoacacia) as substrates for several edible mushrooms. For the cultivation of several edible and/or medicinal fungi on black locust, optimum bulk densities, synthetic or semisynthetic additives, natural additives and pretreatment methods were investigated. Fruit body yields of the fungi on various sawdust media composed of different wood species were also analyzed for testing the capability of black locust as a substrate for mushroom production. Mycelial growths decreased proportional when the bulk density increased. The most suitable carbon and nitrogen sources as additives to promote the mycelial growth were sucrose (2%, w/w) and ammonium phosphate (0.2%, w/w) respectively. When corn-powder and beer-waste as natural additives were added to sawdust of black locust showed the significant growth of mycelia. And the optimum mixing ratio was 10:2:1 (sawdust: corn-powder: beer-waste, w/w). Black locust after cold water treatment showed the outstanding mycelial growths. Any significant changes of pH, moisture content (%) and dry-weight losses (%) could not be found among culture substrates (sawdust of black locust, oak and poplar wood) examined before and after harvesting of fruit bodies. Yield of fruit bodies on black locust culture media were comparable with those culture media composed with oak and poplar wood. The present work indicated strongly the potentiality of black locust as raw materials for edible and medicinal mushrooms.