The aim of this study is to ensure the structural integrity of a canister to be used in a dry storage system currently being developed in Korea. Based on burnup and cooling periods, the canister is designed with 24 bundles of spent nuclear fuel stored inside it. It is a cylindrical structure with a height of 4,890 mm, an internal diameter of 1,708 mm, and an inner length of 4,590 mm. The canister lid is fixed with multiple seals and welds to maintain its confinement boundary to prevent the leakage of radioactive waste. The canister is evaluated under different loads that may be generated under normal, off-normal, and accident conditions, and combinations of these loads are compared against the allowable stress thresholds to assess its structural integrity in accordance with NUREG-2215. The evaluation result shows that the stress intensities applied on the canister under normal, off-normal, and accident conditions are below the allowable stress thresholds, thus confirming its structural integrity.

Even though a huge amount of spent nuclear fuels are accumulated at each nuclear power plant site in Korea, our government has not yet started to select a final disposal site, which might require more than several km2 surface area. According to the second national plan for the management of high-level radioactive waste, the reference geological disposal concept followed the Finnish concept based on KBS-3 type. However, the second national plan also mentioned that it was necessary to develop the technical alternatives. Considering the limited area of the Korean peninsula, the authors had developed an alternative disposal concepts for spent nuclear fuels in order to enhance the disposal density since 2021. Among ten disposal concepts shown in the literature published in 2000’s, we narrowed them to four concepts by international experiences and expert judgements. Assuming 10,000 t of CANDU spent nuclear fuels (SNF), we designed the engineered barriers for each alternative disposal concept. That is, using a KURT geological conditions, the engineered barrier systems (EBS) for the following four alternative concepts were proposed: ① mined deep borehole matrix, ② sub-seabed disposal, ③ deep borehole disposal, and ④ multi-level dispoal. The quantitative data of each design such as foot prints, safety factors, economical factors are produced from the conceptual designs of the engineered barriers. Five evaluation criteria (public acceptance, safety, cost, technology readiness level, environmental friendliness) were chosen for the comparison of alternatives, and supporting indicators that can be evaluated quantitatively were derived. The AHP with domestic experts was applied to the comparison of alternatives. The twolevel disposal was proposed as the most appropriate alternative for the enhancement of disposal efficiency by the experts. If perspectives changes, the other alternatives would be preferred. Three kinds of the two-level disposal of CANDU SNF were compared. It was decided to dispose of all the CANDU spent nuclear fuels into the disposal holes in the lower-level disposal tunnels because total footprint of the disposal system for CANDU SNF was much smaller than that for PWR SNF. Currently, we reviewed the performance criteria related to the disposal canister and the buffer and designed the EBS for CANDU SNF. With the design, safety assessment and cost estimates for the alternative disposal system will be carried out next year.

Spent nuclear fuel management is a high-priority issue in South Korea, and addressing it is crucial for the country’s long-term energy sustainability. The KORAD (Korea Radioactive Waste Agency) is leading a comprehensive, long-term project to develop a safe and effective deep geological repository for spent nuclear fuel disposal. Within this framework, we have three primary objectives in this work. First, we conducted statistical analysis to assess the inventory of spent nuclear fuel in South Korea as of 2021. We also projected future generation rates of spent nuclear fuels to identify what we refer to as reference spent nuclear fuels. These reference spent nuclear fuels will be used as the design basis spent fuels for evaluating the safety of the repository. Specifically, we identified four types of design basis reference spent nuclear fuels: high and low burnup from PLUS7 (with a 16×16 array) and ACE7 (with a 17×17 array) assemblies. Second, we analyzed radioactive nuclides’ inventory, activities, and decay heats, extending up to a million years after reactor discharge for these reference spent nuclear fuels. This analysis was performed using SCALE/TRITON to generate the burnup libraries and SCALE/ORIGEN for source term evaluation. Third, to assess the safety resulted from potential radioactive nuclides’ release from the disposal canister in future work, we selected safety-related radionuclides based on the ALI (Annual Limit of Intake) specified in Annex 3 of the 2019-10 notification by the NSSC (Nuclear Safety and Security Commission). Conservative assumptions were made regarding annual water intake by humans, canister design lifetime, and aquifer flow rates. A safety margin of 10-3 of the ALI was applied. We selected 56 radionuclides that exceed the intake limits and have half-lives longer than one year as the safety-related radionuclides. However, it is crucial to note that our selection criteria focused on ALI and half-lives. It did not include other essential factors such as solubility limits, distribution coefficients, and leakage processes. So, some of these nuclides can be removed in a specific analysis area depending on their properties.

In order to use nuclear energy stably, high level radioactive waste including spent nuclear fuel that is inevitably discharged from nuclear power plants after electricity generation must be managed safely and isolated from the human living area for a long period of time. In consideration of the accumulated amount of spent nuclear fuel anticipated according to the national policy for HLW management, the area required for the deep geological repository facility is expected to be very large. Therefore, it is essential to conduct various studies to optimize the area required for the disposal of spent nuclear fuel in cases where the nationally available land is extremely limited, such as in Korea. In this study, as part of such research, the strategies and the requirements for the preliminary design of a high efficiency repository concept of spent nuclear fuel were established. For PWR spent nuclear fuel, seven assemblies of spent nuclear fuel can be accommodated in a disposal canister, and high burnup of spent nuclear fuel was taken into consideration, and the source terms such as the amount and time of discharge and disposal were based on the 2nd national basic plan. By evaluating the characteristics, the amount of decay heat that can be accommodated in the disposal canister was optimized through the combination of seven assemblies of spent nuclear fuel. The cooling period of the radiation source for the safety assessment of the repository system was set at 55 years, and the operation of the repository would start from 2070 and then the disposal schedule would be conducted according to the disposal scenario based on the national basic plan. With these disposal strategies described above, the main requirements for setting up the conceptual design of the high efficiency repository system to be carried out in this study were described below. • A combination of seven spent nuclear fuels with high heat and spent nuclear fuels with low heat was loaded into a disposal canister, and the thermal limit per disposal canister was 1,600 W. • In order to maintain the long-term performance of the repository, the maximum temperature design limit in the buffer material was set to 130°C. • In the deep disposal environment, the safety factor [yield strength/maximum stress] required to maintain the structural stability of the disposal canister should be maintained at 2.0 or higher so that integrity of the canister can be maintained even under long-term hydrostatic pressure and buffer swelling pressure in the deep disposal environment. • The repository should have a maximum exposure dose of 10 mSv/yr or less, which is the legal limit in case of a single event such as an earthquake, and the risk level considering natural phenomena and human intrusion, which is less than the legal limit of 10-6/yr. These strategies and requirements can be used to develop the high-efficiency geological disposal concept for spent nuclear fuels as an alternative disposal concept.

It is expected that around 576,000 bundles of CANDU spent nuclear fuels (SNF) will be generated from the four CANDU reactors located at the Wolsong site. The authors designed and proposed a reference disposal concept based on the KBS-3 type and KURT geological data in 2022. In addition, we have reviewed the literatures and selected four alternative disposal methods to develop the higherefficiency disposal concept than the reference concept since 2021. As known well, the most important safety functions of the geological disposal are containment and isolation, and the secondary function is retardation. A disposal canister covers the former, and buffer may do the latter. In this study, we design the engineered barrier systems for the four alternative concepts: (1) mined deep borehole matrix, (2) sub-seabed disposal, (3) deep borehole disposal, and (4) multi-level dispoal. Assuming total 10,000 tU of CANDU SNF, four different kinds of unit disposal module consisting of disposal canisters and compacted bentonite buffers are designed based on the technique currently available. Two alternative concepts, sub-seabed disposal and multi-level disposal, share the same unit module design with the reference concept in 2022. For all the alternative concepts, we assume that the density of the compacted buffer is 1.6 g/cm3. For the mined deep borehole matrix disposal, we introduce a disposal canister slightly modified from the Canadian NWMO canister with a capacity of 48 bundles. The thickness of a copper layer is changed to be 10 mm considering the long-term corrosion resistance. The buffer thickness around a disposal canister is 20 cm, and the diameter of a borehole is 100 cm. Two different kinds of buffer blocks are proposed for the easy handling of them. For the deep borehole disposal, a SiC-stainless steel canister is designed, and 63 bundles of CANDU SNF is emplaced in the canister. We expect that the SiC ceramic canister shows very excellent corrosion resistance and has a high thermal conductivity under the geological conditions. The deep borehole will be plugged with four layered sealing materials consisting of granite blocks, compacted bentonite, SiC ceramic, and concrete plugs.

It is expected that around 576,000 bundles of CANDU spent nuclear fuels (SNF) will be generated from the four CANDU reactors located at the Wolsong site, according to the 2nd National Plan for the management of High-Level radioactive Waste (HLW). The CANDU SNFs are currently stored at the dry storage facilities at the Wolsong site. The authors proposed KRS+ geological disposal system consisting of two different concepts, Swedish KBS-3V type and Canadian NWMO type, for the final management of CANDU SNF. Both the concepts were designed based on the geological data obtained from the KURT (KAERI Underground Research Tunnel). The NWMO type is an in-room horizontal placement method. In this study, we try to determine the reference concept among the two proposed concepts at 500 meters below the ground surface. Assuming 10,000 tU of CANDU SNF and the KURT site, we design two engineered barrier systems, that is disposal canisters and buffers. The copper disposal canister is designed with a copper thickness of 10 mm based on a cold spray coating technique for both the disposal concepts. The domestic Ca-bentonite is used for the compact bentonite buffer with dry density of 1.6 g/cm3. Two concepts are compared in terms of safety, economics of the engineered barriers, and environment-friendliness. Because the same amounts of CANDU SNF are disposed of at the same depth, the differences in the disposal area are neglected. For the comparison in terms of safety, the corrosion lifetimes of the disposal canisters of two disposal systems are quantitatively calculated, and the capacities for retarding radionuclide releases of the compacted bentonite buffers are assessed. A computer tool developed by the authors is used in order to assess the lifetime of a disposal canister. In this study, the case that corrosion of a copper canister by sulfide from groundwater through intact buffer is analyzed. The sulfide concentration in groundwater is assumed to be 3 ppm. The most important safety function of buffer is to retard the radionuclide release. Twelve long-lived radionuclides are selected to compare the capacities for retarding the radionuclide transport through the buffer using an analytical solution. The retention time by an engineered barrier consisting of a disposal canister and a buffer is compared with twenty times the half-life of each radionuclide for both the disposal systems. The selected reference concept will be compared with the alternative geological concepts through a further study.

Currently, the most widely accepted disposal concept for long-term isolation of high level radioactive waste including spent nuclear fuels is to disposal in a deep geological repository designed and constructed with multiple barriers composed of engineered and natural barriers so that the waste can be completely isolated in a stable deep geological environment. In this concept, an important consideration is the heat generated from the waste due to the large amount of fission products present in the high level waste loaded in the disposal container. For safe and complete isolation of high level radioactive waste in the deep geology, the disposal concepts that meet the thermal requirements for the disposal system design have been developed by harmonizing the thermal characteristics of engineered and natural barriers in Korea. In this paper, the deposition hole configuration and the decay heat dissipation area (surface area) of disposal container were considered for the efficient thermal management in the deep geological disposal concept. Heat transfer through the waste form, its container and surrounding components and the rock will be mainly by conduction. Heat transfer by radiation and convection can be negligible after backfilling. When considering heat conduction, according to Fourier’s law, if the thermal conductivity of the repository components is the same, the greater the heat dissipation area and the adjacent temperature gradient, the greater the conduction effect. Therefore, rather than the conventional concept of loading 4 PWR spent fuel assemblies per disposal container and placing one disposal container in a deposition hole, it is better to load one assembly per disposal container and place 4 disposal containers in a deposition hole. In this case, it was found that the disposal area could be reduced through efficient thermal management. Considering this thermal management method as an alternative to the concept of deep geological disposal, additional research is needed.

Several countries, including Korea, are considering the direct disposal of spent nuclear fuels. The radiological safety assessment results published after a geological repository closure indicate that the instant release is the main radiation source rather than the congruent release. Three Safety Case reports recently published were reviewed and the IRF values of seven long-lived radionuclides, including relevant experimental results, were compared. According to the literature review, the IRF values of both the CANDU and low burnup PWR spent fuel have been experimentally measured and used reasonably. In particular, the IRF values of volatile long-lived nuclides, such as 129I and 135Cs, were estimated from the FGR value. Because experimental leaching data regarding high burnup spent nuclear fuels are extremely scarce, a mathematical modelling approach proposed by Johnson and McGinnes was successfully applied to the domestic high burnup PWR spent nuclear fuel to derive the IRF values of iodine and cesium. The best estimate of the IRF was 5.5% at a discharge burnup of 55 GWd tHM−1.

The research for the safe management of high-level waste in Korea has been conducted by the Korea Atomic Energy Research Institute since 1997, and the results have formed the basis of the national basic plan for the high-level waste management and the revised national basic plan. In the future, it is evolving and developing R&D focusing on securing technologies for demonstration of the disposal technologies and R&D to develop disposal concepts that increase safety and improve efficiency. Efficient management of heat generated from high-level radioactive waste, including spent nuclear fuel, is an important factor in establishing the disposal concepts because it must be in harmony with key factors such as repository layout, waste disposal container specifications, and design and operation for the barriers of the disposal system. For safe and complete isolation of highlevel radioactive waste in the deep geology, the disposal systems that meet the thermal requirements for the disposal system design have been developed by harmonizing the thermal characteristics of engineered and natural barriers in Korea. These disposal systems were based on low burn-up spent nuclear fuel characteristics generated in the early stages of nuclear power generation, and next, based on the high-level wastes from recycling process of the high burn-up spent nuclear fuels, and were the direct disposal systems for the high burn-up spent nuclear fuels. So, it is necessary to track and analyze the change process in the decay heat characteristics of the high-level waste to be disposed of in order to improve the disposal concept, which enhances the safety of disposal and the utilization of the national land. Therefore, in this paper, the process of change in decay heat of reference spent nuclear fuels for disposal applied to the disposal concepts from the initial stage of development of high-level waste disposal technology to the present in Korea is analyzed.

Around 40 years ago, in the mid-1980s, Swedish government approved the KBS-3 method for the direct disposal of spent nuclear fuels (SNF) in Sweden. Since then, this method has become a reference for many countries including Korea, Republic of. The main ideas of the KBS-3 method are to locate SNF at 500 m below the ground surface using a copper disposal canister and a bentonite buffer. In 2016, our government announced the National Plan (NP 2016) regarding the final management of high-level waste (HLW) in Korea. In 2019, new committee were organized to review the NP 2016, and they submitted the final recommendations to the government in 2021. Finally, the government announced the 2nd National Plan in December, 2021. So far, KAERI has developed the technologies related to the final management of SNF in two directions. One follows ‘direct disposal’ based on the KBS-3 concept, and the other ‘recycling’ based on ‘pyroprocessing-and-SFR’ (PYRO-SFR). Even though Posiva and SKB obtained the construction permits with the KBS-3 method in Finland and Sweden, respectively, there are still several technical obstacles to applying directly to our situations. Some examples are as follows: high burnup, huge amounts of SNF, and high geothermal gradient in Korean peninsula. In this work, we try to illustrate some limits of the KBS-3 method. Within our country, currently, the most probable disposal option is the KBS-3 type geological disposal, but no one knows what the best option will be in 20 or 30 years if those kinds of drawbacks are considered. That is, we compare the effects of the drawbacks using our geological data and characteristics of spent fuels. Last year, we reviewed alternative disposal concepts focusing on the direct disposal of SNF and compared the pros and cons of them in order to enhance the disposal efficiency. We selected four candidate concepts. They were multi-level disposal, deep borehole disposal, sub-seabed disposal and mined deep borehole matrix. As mentioned before, KAERI has developed a pyroprocessing technology based on the SFR to reuse fissile radionuclides in SNF. Even though we can consume some fissile nuclides such as 239Pu and 241Pu using PYRO-SFR cycle, there still remain many long-lived radionuclides such as 129I and 135Cs waiting for the final disposal. The authors review and propose several concepts for the future final management of the long-lived radionuclides.

Solid-state mechanochemical reduction combined with subsequent melting consolidation was suggested as a technical option for the oxide reduction in pyroprocessing. Ni ingot was produced from NiO as a starting material through this technique while Li metal was used as a reducing agent. To determine the technical feasibility of this approach for pyroprocessing, which handles spent nuclear fuels, thermodynamic calculations of the phase stabilities of various metal oxides of U and other fission elements were made when several alkaline and alkali-earth metals were used as reducing agents. This technique is expected to be beneficial, not only for oxide reduction but also for other unit processes involved in pyroprocessing.

With respect to spent nuclear fuels, disposal containers and bentonite buffer blocks in deep geological disposal systems are the primary engineered barrier elements that are required to isolate radioactive toxicity for a long period of time and delay the leakage of radio nuclides such that they do not affect human and natural environments. Therefore, the thermal stability of the bentonite buffer and structural integrity of the disposal container are essential factors for maintaining the safety of a deep geological disposal system. The most important requirement in the design of such a system involves ensuring that the temperature of the buffer does not exceed 100℃ because of the decay heat emitted from high-level wastes loaded in the disposal container. In addition, the disposal containers should maintain structural integrity under loads, such as hydraulic pressure, at an underground depth of 500 m and swelling pressure of the bentonite buffer. In this study, we analyzed the thermal stability and structural integrity in a deep geological disposal environment of the improved deep geological disposal systems for domestic light-water and heavy-water reactor types of spent nuclear fuels, which were considered to be subject to direct disposal. The results of the thermal stability and structural integrity assessments indicated that the improved disposal systems for each type of spent nuclear fuel satisfied the temperature limit requirement (< 100℃) of the disposal system, and the disposal containers were observed to maintain their integrity with a safety ratio of 2.0 or higher in the environment of deep disposal.

국내 원자력발전소에서 발생하는 사용후핵연료의 제원 및 방출시점 등 특성과 현재의 고준위 방사성폐기물 기본계획에 근거한 처분시나리오를 도출하여 기존 심층 처분시스템을 바탕으로 처분효율과 경제성을 향상시킨 개선된 처분시스템을 제안 하였다. 이를 위하여 국내 원자력발전소에서 발생하는 사용후핵연료의 길이에 따라 2종류의 처분용기 개념을 도출하고, 사용후핵연료 발생 년도와 현재의 기본계획에 근거한 처분 시나리오 설정에 따른 처분시점에서의 냉각기간을 고려하여 처분 용기내 수용 가능한 붕괴열량을 결정하였다. 그리고 2종류의 처분용기에 대한 처분시스템과 결정된 붕괴열을 바탕으로 열 적 안정성 분석을 통하여 제안된 처분시스템의 설계요건에 대한 적합성 여부를 확인하고, 처분효율을 평가하였다. 개선된 처분시스템은 기존 처분시스템에 비하여 처분면적은 약 20% 감소되고 처분밀도는 약 20% 향상됨을 확인하였고, 처분용기와 완충재 재료도 상당량 절감됨을 확인하였다. 본 연구의 결과는 향후 사용후핵연료 관리정책 수립 및 실제 사업을 위한 처분시스템 설계를 위한 자료로 활용될 수 있다.