Activated carbon (AC), extensively used across various industrial sectors, serves as a sponge for different types of gases due to its porous carbon material. These gases are attracted to the carbon substrate via van der Waals forces. In nuclear power plants, AC is commonly used to adsorb radioactive gases such as 86Kr and 134Xe, as well as radioiodine sources like 131I and 133I from gaseous effluents. Even if the adsorbed radioactive gases and radioiodine decay into non-radioactive elements, the spent AC still contains radioactive species with long half-lives, such as 3H (Tritium, T) and 14C (radiocarbon). Minimizing and separating waste that contains long-lived nuclides (e.g., 14C) are pivotal components of an efficient waste management approach. A challenging aspect of effectively managing disposed AC is to minimize long-lived radioactive substances by eliminating them. This paper explores and summarizes the technology used to remove pollutants (3H, 14C) trapped within the pores of Activated carbon through thermochemical vacuum and surface oxidation processes. By recycling and reusing spent Activated carbon, we anticipate a reduction in the volume of radioactive waste, leading to decreased disposal costs. Furthermore, this paper will contribute as a valuable reference in future studies, enhancing the understanding of vacuum thermal desorption and surface oxidation of used Activated carbon.

To develop flexible adsorbents for compact volatile organic compound (VOC) air purifiers, flexible as-spun zeolite fibers are prepared by an electrospinning method, and then zeolite particles are exposed as active sites for VOC (toluene) adsorption on the surface of the fibers by a thermal surface partial etching process. The breakthrough curves for the adsorption and temperature programmed desorption (TPD) curves of toluene over the flexible zeolite fibers is investigated as a function of the thermal etching temperature by gas chromatography (GC), and the adsorption/desorption characteristics improves with an increase in the thermal surface etching temperature. The effect of acidity on the flexible zeolite fibers for the removal of toluene is investigated as a function of the SiO2/Al2O3 ratios of zeolites. The acidity of the flexible zeolite fibers with different SiO2/Al2O3 ratios is measured by ammonia-temperature-programmed desorption (NH3-TPD), and the adsorption/desorption characteristics are investigated by GC. The results of the toluene adsorption/desorption experiments confirm that a higher SiO2/ Al2O3 ratio of the flexible zeolite fibers creates a better toluene adsorption/desorption performance.

지역별로 자생하고 있는 백리향 지상부의 휘발성 향기 성분 및 방부성 물질인 phenols의 성분을 조사하기 위해 제주도 고산종, 제주도 중간산종, 경기도, 울릉도, 강원도 서식종을 TD-GC-MSD로 분석한 결과 제주도 중간산종에서 상대적으로 높은 62종의 물질이 조사되었으며 함량도 7365.22μg/m3으로 높은 농도를 나타냈다. 또한 백리향의 휘발성 향기성분 중 제주도 중간산종이 다른 조사지역보다 상대적으로 thymol과 carvacrol의 phenol성 물질이 다른 휘발성분에 비해 35.92%로 높은 결과를 보였다.

This paper examined reasonable operating factor for treatment of carcass burial leachate in High Temperature Thermal Desorption (HTTD) and calculated the amount of fuel used in each device using heat and mass balance under condition of 4 scenarios. As a result, we concluded that rotary kiln for dryness and thermal desorption shoud be separated dual type and mixing ratio of sawdust and soil should be restricted no more than 1 : 14. Also, operating temperature should be kept 260, 550, 850 or higher in dryer kiln, thermal desorption kiln and secondary chamber respectively and residence time should be kept 30min in each kiln. The total amount of fuel used in each device was compared under 4 scenarios on the mixing ratio. According to a study, it showed the highest value under the scenario of 1 : 1, which showed 2.5 times higher than the scenario of 1 : 14 in terms of treatment of leachate per unit of LNG.

This study analyzed concentration and characteristics of hazardous substances in treatment of leachate from carcass burial areas by using high temperature thermal desorption (HTTD). Concentrations of pollutants emitted from HTTD treatment of leachate contaminated soil of carcass burial sites satisfied the emission standards for 11 pollutants from domestic waste incineration facilities. Dioxin concentration was 0.0060 ng I-TEQ/Sm3 and 0.0061 (0.0055-0.0070) ng ITEQ/ Sm3 in the normal operation condition and the experimental condition, respectively, which are much lower than the MSWI Standard of 0.1ng I-TEQ/Sm3. As a result, it was considered that leachate from carcass burial areas could be treated by high temperature thermal desorption (HTTD).