Electromagnetic wave energies are consumed in the form of thermal energy, which is mainly caused by magnetic loss, dielectric loss and conductive loss. In this study, CNT was added to the nanocrystalline soft magnetic materials inducing a high magnetic loss, in order to improve the dielectric loss of the EM wave absorption sheet. Generally, the aspect ratio and the dispersion state of CNT can be changed by the pre-ball milling process, which affects the absorbing properties. After the various ball-milling processes, 1wt% of CNTs were mixed with the nanocrystalline base powder, and then further processed to make EM absorption sheets. As a result, the addition of CNT to Fe-based nanocrystalline materials improved the absorption properties. However, the increase of ball-milling time for more than 1h was not desirable for the powder mixture, because the ballmilling caused the shortening of CNT length and the agglomeration of the CNT flakes.

The electromagnetic wave absorption sheets were fabricated by mixing of nanocrystalline soft magnetic powder, charcoal powder and polymer based binder. The complex permittivity, complex permeability, and scattering parameter have been measured using a network analyzer in the frequency range of 10 MHz10 GHz. The results showed that complex permittivity of sheets was largely dependent on the frequency and the amount of charcoal powder : The permittivity was improved up to 100 MHz, however the value was decreased above 1 GHz. The power loss of electromagnetic wave absorption data showed almost the same tendency as the results of complex permittivity. However, the complex permeability was not largely affected by the frequency, and the values were decreased with the addition of charcoal powder. Based on the results, it can be summarized that the addition of charcoal powder was very effective to improve the EM wave absorption in the frequency range of 10 MHz1 GHz.

We measured cobalt content in sorghum (Sorghum bicolor (L.) Moench.) by atomic absorption spectrophotometry: their absorbance and back ground values. These analyses were with AA-680 of Shimadzu. The mode was BGC; wave length, 240.8 ㎚, 240.7 ㎚, 240.6 ㎚, respectively. The recommended wave length is 240.7 ㎚ for Co analysis. It was done through several ratios among 4 factors; mean of absorbance(AM), standard deviation of absorbance (AS), mean of background(BM), standard deviation of background.(BS). The result was t㏊t 240.6 ㎚ was the favourable. And t㏊t of 240.8 ㎚ was better t㏊n t㏊t of 240.7 ㎚ for the Co analysis.

Efforts to reduce noise in industrial application fields, such as automobiles, aircrafts, and plants have been gaining considerable attention while a sound proof wall to protect people from the noise has been intensively investigated by many researchers. In this study, our research group suggested creating a new sound proof wall composed of scrap aluminum chips and perforated plates in a commercial polyester sound proof wall, which was then successfully fabricated. This wall's sound absorption characteristics were measured by an impedance tube method. The sound absorption property was evaluated by measuring the Noise Reduction Coefficient (NRC) to the standard, ASTM C 423-90a. The noise reduction coefficient of the sound proof wall composed of 3.5 vol.% and 7.5 vol.% of scrap aluminum chips relatively increased to 5% and 8% compared to the commercial polyester sound proof wall. The scrap aluminum perforated plate also relatively increased to 13% compared to the commercial polyester sound proof wall.

소형의 담액 수경재배기를 이용하여 기본 배양액에 셀레늄(Se) 1mg L-1과 계면활성제 PVA-95(polyvinyl alcohol-95) 1, 2, 4mg L-1과 CLS(calcium lignosulfonate) 5, 25, 50, 100mg L-1을 처리하여 청경채와 상추 식물체의 Se과 양이온 함량, 생육, 그리고 비타민 C 함량을 조사하였다. 생육은 처리간에 차이는 있지만 종류와 농도 별로 일정한 경향을 보이지 않았다. 총 비타민 C 함량은 두 작물 모두 모든 처리구에서 대조구에 비해 약간 증가하는 경향을 보였으나 유의성은 없었다. K 함량은 싱추의 경우는 일정한 경향이 없었지만, 청경채의 경우 Se 1+PVA-95 4mg L-1 처리구가 가장 높았고, Se 1+CLS 처리에서는 대조구에 비해 5mg L-1 농도에서는 증가하였지만 처리 농도가 증가할수록 감소하였다. Ca 함량은 두 작물 모두 Se 1+PVA-95와 CLS 처리에서 대조구에 비해 증가하였다. Mg 함량은 상추에서는 계면 활성제 처리에 의한 Mg 함량의 변화가 없었으며, 청경채에는 Se 1+CLS 25mg L-1 처리구가 대조구에 비해 증가하였고 기타 처리는 차이가 없었다. 식물체내 Se 함량은 상추에서는 계면 활성제 PVA-95 처리와 CLS 처리가 대조구에 비해 Se 함량이 모두 높았고, PVA-95 처리에서는 농도의 증가에 따라 Se 함량이 낮아졌으며, CLS 처리에서는 50mg L-1 까지는 높아졌지만 100mg L-1에서는 낮아졌다. 청경채의 엽내 Se 함량은 계면활성제 PVA-95 처리가 큰 효과가 없었으나 CLS 25mg L-1 처리에서 현저히 증가되었다.

Chemicals for cosmetics, including skin, the skin absorbs some of the research in the field of science or pharmacy recently, about the environment and the health of the heightened interest in skin absorption. Many other human attributes and absorption evaluation studies are underway in various areas. This study were used rats and carried out to find out the effects of commercial permanent wave products to skin which are composed with thioglycolic acid and bases. Results were as follows. Permanent wave penetrated to 3 hours later with steady state in skins and was not significant changeable after 20hr later. In case of neutralizer with thioglycolic acid lag time and permeability coefficient in healthy skin were 3.32hr and 0.101μg/cm2/hr, in old skin were 3.08hr and 0.117μg/cm2/hr, and in wounded skin were 3.02hr and 0.166μg/cm2/hr. In conclusion, lag time and permeability coefficient in old skin and wounded skin were faster than healthy skin. In vivo, We were studied to general time and method of permanent wave. We found out that fine wrinkle and rash of skin were changeable in the case of treating with permanent wave drugs than normal skin.

We fabricated thermally evaporated 30 nm-Ni/(20 nm or 60 nm)a-Si:H/Si films to investigate the energy-saving property of silicides formed by rapid thermal annealing (RTA) at temperatures of 350˚C, 450˚C, 550˚C, and 600˚C for 40 seconds. A transmission electron microscope (TEM) and a high resolution X-ray diffractometer (HRXRD) were used to determine the cross-sectional microstructure and phase changes. A UVVIS-NIR and FT-IR (Fourier transform infrared spectroscopy) were employed for near-IR and middle-IR absorbance. Through TEM and HRXRD analysis, for the nickel silicide formed at low temperatures below 450˚C, we confirmed columnar-shaped structures with thicknesses of 20~30 nm that had δ-Ni2Si phases. Regarding the nickel silicide formed at high temperatures above 550˚C, we confirmed that the nickel silicide had more than 50 nm-thick columnar-shaped structures with a Ni31Si12 phase. Through UV-VIS-NIR analysis, nickel silicide showed almost the same absorbance in the near IR region as well as ITO. However, in the middle IR region, the nickel silicides with low temperature showed similar absorbance to those from high temperature silicidation.

We measured the degree of macrodispersion of the various single-walled carbon nanotubes (SWCNTs) and multi-walled carbon nanotubes (MWCNTs) using UV-VIS-NIR absorption spectroscopy. CNTs were dispersed with SDS of 2 wt % in deionized water using the homogenizer and then were further centrifugated at 6000 g for 10 min. The degree of macrodispersion, expressed by Dm(λ)=Aa(λ)/Ab(λ)*100 (%), where λ is the wavelength and Aa(λ) and Ab(λ) are the absorbance of the sample after and before centrifugation, respectively. In the case of MWCNTs, we evaluated the degree of macrodispersion by the average degree of macrodispersion (Dm(λ)) between 1000 and 1200 nm. The degree of macrodispersion of SWCNTs was evaluated at the wavelength in which van Hove singularity-related transition regions were excluded, i.e., the range was chosen between E11S and E22S peaks. We have estimated six samples with the same method. The standard deviation of each sample was lower than 5. Therefore, we presented a reliable evaluation method for the macrodispersion of CNTs for standardization.

We propose an evaluation method of the relative content of single-walled carbon nanotubes (SWCNT) in SWCNT soot synthesized by arc discharge using UV-VIS-NIR absorption spectroscopy. In this method, we consider the absorbance of semiconducting and metallic SWCNTs together to calculate the relative content of SWCNTs with respect to a highly purified reference. Our method provides the more reliable and realistic evaluation of SWCNT content with respect to the whole carbonaceous content than the previously reported method.

In order to increase the magnetic loss for electromagnetic(EM) wave absorption, the soft magnetic (at%) alloy strip was used as the basic material in this study. The melt-spun strip was pulverized using an attrition mill, and the pulverized flake-shaped powder was crystallized at for 1h to obtain the optimum grain size. The Fe-based powder was mixed with 2 wt% , wt% carbon black, and polymer-based binders for the improvement of electromagnetic wave absorption properties. The mixture powders were tape-cast and dried to form the absorption sheets. After drying at for 1h, the sheets of 0.5 mm in thickness were made by rolling at , and cut into toroidal shape to measure the absorption properties of samples. The characteristics including permittivity, permeability and power loss were measured using a Network Analyzer(N5230A). Consequently, the properties of electromagnetic wave absorber were improved with the addition of both and carbon black powder, which was caused by the increased dielectric loss of the additive powders.

The electromagnetic (EM) wave absorption properties of the nanocrystalline powder mixed with 5 to 20 vol% of Ni-Zn ferrites has been investigated in a frequency range from 100MHz to 10GHz. Amorphous ribbons prepared by a planar flow casting process were pulverized and milled after annealing at 425 for 1 hour. The powder was mixed with a ferrite powder at various volume ratios to tape-cast into a 1.0mm thick sheet. Results showed that the EM wave absorption sheet with Ni-Zn ferrite powder reduced complex permittivity due to low dielectric constant of ferrite compared with nanocrystalline powder, while that with 5 vol% of ferrite showed relatively higher imaginary part of permeability. The sheet mixed with 5 vol% ferrite powder showed the best electromagnetic wave absorption properties at high frequency ranges, which resulted from the increased imaginary part of permeability due to reduced eddy current.

Chemicals for cosmetics, including skin, the skin absorbs some of the research in the field of science or pharmacy recently, about the environment and the health of the heightened interest in skin absorption, and many other human attributes and absorption evaluation studies are underway in various areas. In this study, The effects of commercial permanent wave products to skin which are composed with cysteine and bases using rat. Results are as follows; the content of penetration 4 hours later with steady state and no significant changeable after 20 hours later. In cysteine groups lag time and permeability coefficient of young skin is 3.32hr and 0.102μg/cm2·hr, lag time and permeability coefficient of old skin is 4.04hr and 0.106μg/cm2·hr. In conclusion of study lag time and permeability coefficient in old skin and wounded skin are faster than healthy skin. We notified that fine rinkle and rash of skin were changeable in the case of treating with permanent wave drugs than normal skin.

The amorphous (at%) alloy strip was pulverized using a jet mill and an attrition mill to get flake-shaped powder. The flake powder was mixed with dielectric powder and its dispersant to increase the permittivity. The powders covered with dielectric powders and its dispersant were mixed with a binder and a solvent and then tape-cast to form sheets. The absorbing properties of the sheets were measured to investigate the roles of the dielectric powder and its dispersant. The results showed that the addition of powders and its dispersant improved the absorbing properties of the sheets noticeably. The powder sheet mixed with 5 wt% of powder and 1 wt% of dispersant showed the best electromagnetic wave absorption rate because of the increase of the permittivity and the electrical resistance