본 연구에서는 처리용기의 재질에 따른 광펄스의 살균 효과에 대해서 알아보았다. 처리용기의 재질에 따른 UV-C 의 광량은 대조구는 3.595W/m2이었으며, 두께 1 mm에서 석영은 3.358W/m2, 아크릴은 0.878W/m2, 그리고 유리는 0.060W/m2였으며, 빛의 투과율은 석영은 93.4%, 아크릴은 24.4%, 유리는 1.7%로 나타났다. 처리 용기 재질에 따른 살균 효과는 석영은 처리용기의 두께와 상관없이 대조구와 동일한 살균 효과를 보였으며, 아크릴은 1 mm 두께에서 60초 처리 후 1.1 log 사멸하였으며, 180초 처리 후에는 5.0 log의 사멸효과를 보였으며, 두께가 증가함에 따라 살균 효과가 현저히 감소하였다. 유리는 두께와 관계없이 살균 효과가 거의 없었다. 사멸패턴은 유리를 제외하고는 모두 bi-phasic의 형태를 보였으며, 사멸속도상수와 D 값은 대조 구는 k1값은 0.287 s−1이었으며, k2값은 0.072 s−1이었고, D1 은 8.02 s였으며, D2는 31.87 s였다. 1 mm의 두께에서 석영 은 k1은 0.284 s−1, k2는 0.069 s−1, 아크릴은 k1은 0.018 s−1, k2는 0.042 s−1이었고, 유리는 k는 0.004 s−1이었다. 두께 1 mm에서 D값은 석영은 D1=8.11 s, D2=33.87, 아크릴은 D1 =127.94 s, D2=54.83 s, 유리는 D=575.75 s로 나타났다.

There has been a growing concern about the emissions of formaldehyde and VOCs from automotive interior materials which could have an important impact on the in-vehicle air quality(IVAQ) of automotive vehicles. Many leading automobile manufacturers have now introduced their own specification standards for testing and limiting emissions from products produced by their suppliers. In addition, ISO (International Standard Organization) has been established ISO 12219-1, 2, 3, 4, 5 to determine the emissions of volatile organic compounds from automotive vehicle. The objective of this paper is to compare the area specific emission rates determined from surface emissions testing using the microchamber(MC) in comparison with a 1 m³ emission test chamber(ETC) operated in accordance with ISO 12219-3, ISO 12219-4. Measured emission concentrations in absolute terms were different between Microchamber and 1 m³ chamber. However, qualitative comparison of the chromatograms shows that the Microchamber is able to perform a screening test

This study was performed to analysis the concentration of TVOC, 5VOC and formaldehyde for building material of total 262 using 20L test chamber. The concentration of TVOC, 5VOC and formaldehyde were measured 1.001㎎/㎡･h, 43.032㎍/㎡･h, 0.012㎎/㎡･h, respectively. TVOC concentration of paint and floor covering occupied the largest concentration of the indoor building materials as 2.689㎎/㎡･h, 2.120㎎/㎡･h, respectively. 5VOC concentration of floor covering was measured 106.636㎍/㎡･h. Toulene and xylene were occupied the largest part of the 5VOC as 51.2% and 33.1%, respectively. The concentration of formaldehyde for furniture materials occupied the largest concentration of the indoor building material as 0.072㎎/㎡h.