최근, 큰 처짐과 다수의 균열을 동반하는 유사연성 거동과 부식에 대한 높은 내구성의 특징을 가진 FRCM(Fabric-Reinforced Cemenetitious Matrix) 복합체에 대한 관심이 증가하고 있다. 철근콘크리트 부재에 대해 다양한 장점을 지닌 FRMC 복합체를 적용할 경우 전단내력의 증대를 예상할 수 있으며, 이를 통해 내진성능이 요 구되는 철근콘크리트 구조물에 효과를 기대할 수 있다. 본 연구에서는 FRCM 복합체가 보강된 철근콘크리트 기둥에 대해 정적 반복가력 실험을 수행하고, 그 거동을 평가 하였다. 철근콘크리트 기둥은 직사각형 형상으로 단면의 크기가 300 × 300 mm이고, 순 높이는 800 mm로 제작되었다. 정적 반복가력 실험은 설정한 가력패턴에 따라 변위제어를 통해 횡 하중을 가력하 였고, 초기 축력은 기둥 용량의 10 %로 적용하였다. 정적 반복가력 실험 결과, 무보강 실험체 대비 약 27.33 %의 증진된 강도를 나타내었으며, 최대 강도 발현 시 층간변위비가 무보강 실험체 대비 약 187.6% 높게 나타냄에 따라 FRCM 복합체가 적용된 철근콘크리트 기둥의 높은 연성 거동을 확인 할 수 있다. 다만, FRCM 복합체를 실제 구조물에 적용하기 위해서는 추가적인 설계인자 개발을 통해 안 정성 및 신뢰성을 확보하는 것이 필수적이라고 판단된다.

In the case of the Pohang earthquake, which had a magnitude of 5.4 in 2017, geotechnical damages such as liquefaction and ground settlement occurred. The need for countermeasures has emerged, and experimental research in the Pohang area has continued. This study collected undisturbed samples from damaged fine-grained soil areas where ground settlement occurred in Pohang. Cyclic tri-axial tests for identifying the dynamic characteristics of soils were performed on the undisturbed samples, and the results were analyzed to determine the cause of ground settlement. As a result of the study, it was determined that in the case of fine-grained soils, ground settlement occurred because the seismic load as an external force was relatively more significant than the shear resistance of the very soft fine-grained soils, rather than due to an increase in excess pore water pressure.

배관 시스템은 다양한 산업영역에서 액체 및 기체로 이루어진 에너지를 수송을 담당하는 중요한 비구조요소로 지진과 같은 외부하중에 의해 손상될 경우 누수로 인한 홍수 및 가연성 가스 누출로 인한 화재 등의 2차피해가 발생할 수 있다. 배관 시스템은 구조물 내부에 설치되는 경우도 있으며 지반에 매립되어 설치되는 경우도 있다. 지반에 매립될 경우 지진으로 인한 과도한 상대변위에 의해 연결부의 손상을 초래할 수 있어 종종 벨로우즈 신축이음관을 적용하여 이러한 피해를 저감시킬 수 있다. 따라서 본 연구에서는 벨로우즈 신축이음관의 반복가력 실험을 기반으로 유한요소 모델을 구축 하여 내진성능을 검토하였다. 반복가력실험은 ±28mm 변위에서 최대 ±123.4mm까지 증가시켜 변위제어를 통해 수행되었으며 추가적으로 유한요소 모델의 신뢰성을 높이기 위해 벨로우즈 배관에 사용된 재료인 STS304의 재료 인장실험을 수행하여 탄성계수 및 항복응력을 결정하였다. 에너지 소산량과 등가 점성 감쇠를 비교하여 개발된 모델의 타당성을 검토하였으며 적용되는 변위가 커짐에 따라 최대 10% 미만의 오차가 발생하여 실험 및 해석결과가 잘 일치하는 것으로 나타났다.

This study presents an experimental study of the structural behavior for steel plate-concrete column-to-steel girder connections. Experiments were carried out to investigate the moment-rotation characteristics, failure behavior and ultimate moment capacity of these connections. The results of this experimental study involving three welded moment-resisting connections subjected to cyclic loading are presented. The specimens were fabricated at full scale to evaluate their hysteretic behavior. A description of the test specimens, the details of the joint, the test system and the testing methods are described. The test results showed that the structural behavior of these composite connections was influenced by the connection details.

An experimental study was performed to investigate the cyclic behavior of steel plate walls with reinforced concrete frames. Three specimens of three-story steel plate walls with reinforced concrete frames were tested. The parameters for the test specimens were the reinforcement ratio of the column and coupling wall. A reinforced concrete infilled wall and a reinforced concrete frame were also tested for comparison. The steel plate walls with reinforced concrete frames exhibited much better ductility and energy dissipation capacity than the reinforced concrete infilled wall and the reinforced concrete frame. The results showed that unlike other structural systems, the steel plate wall with reinforced concrete frames has excellent deformation capacity as well as strength, and can therefore be used as an effective earthquake-resisting system. This result indicates that not only steel frames but also reinforced concrete frames can be used in the steel plate wall system.

강합성교각과 강교각은 철근곤크리트교각에 비해서 우수한 연성, 작은 단면 및 빠른 시공속도에도 불구하고 이 같은 장점들을 활용할 필요가 있는 도시지역에서조차 철근콘크리트교각의 대안으로서 활용되지 못하였다. 이 논문은 강합성교각과 강교각의 내진성능 평가에 관한 연속된 두편의 논문 중 첫편으로 강교각과 강합성 교각의 연성과 강성을 평가 비교하기 위해 수행한 준정적 반복재하실험을 대상으로 하였다. 기존의 강교각 및 강합성교각의 실험과 더불어 채움콘크리트와 하부 다이어프램간의 부작을 개선한 상세를 실험하였다. 또한, 강합성교각의 연성과 강성을 산정하기 위한 간편한 수치해석방법을 찾기 위해 비선형 스프링과 쉘요소를 사용한 해석을 시도하였다. 도시내의 전형적인 오버패스구간의 교각을 모델로 한 실험결과, 강합성교각은 강교각에 비해서 우수한 강성과 에너지 소산능력을 가지고 있는 것으로 나타났으며 채움콘크리트의 부착과 응력집중부의 상세를 개선시기는 것이 강합성교각의 연성과 강성을 증가시키는데 효과적인 것으로 나타났다. 시도된 수지해석방법은 강합성교각과 강교각의 거동을 완벽하게 모사하지는 못했지만 추가적인 연구가 진행되면 연성과 강성을 평가하는 간편한 방법으로 사용될 수 있는 것으로 판단된다.

Painting system are widely used to prevent corrosion damage The coating method on various corrosion preventive method was usually adopted for the functional ability and excellent appearance. In this study, to evaluate the deterioration curve of coating system for steel bridge, the combined cyclic corrosion test was conducted base on ISO 20340. The deterioration areas were measured depending on corrosion cycle. The deteriorations of newly-built coating were compared with those of re-coating.

Seismic performance capacity of CFT seismic retrofit method was studied through cyclic loading test. The added CFT columns share the lateral seismic force of the building with the existing RC columns to prevent building collapse. The experiment shows stable hysteric load-displacement curve.

Seismic performance capacity of CFT seismic retrofit method was studied through cyclic loading test. The added CFT columns share the lateral seismic force of the building with the existing RC columns to prevent building collapse. The experiment shows stable hysteric load-displacement curve.

Cyclic loading tests for a total of nine test specimens were performed to evaluate the seismic performance of the exposed steel column-base plate connections. From the tests, flexural strength, deformation capacity, energy dissipation, and initial stiffness were investigated. The primary test parameters were the thickness of base-plate, embedment length of anchor bolt, the presence of hook, and rib plates. Test results showed that flexural behavior of column base-plate connection was substantially affected by the base-plate thickness, embedment length and the number of anchor bolts. On the other hand, the effect of rib plates on the increase of the flexural performance was not observed. The initial stiffness of the test specimens was about 15% of the flexural stiffness obtained by assuming that the support is fixed. As a result, even if the exposed column base-plate is designed in accordance with current design recommendations, in case that bond strength between concrete and the anchor bolts is not sufficient, the base-plate connection showed an unaccceptable load-displacement behavior.

Seismic performance capacity of CFT seismic retrofit method was studied through cyclic loading test. The added CFT columns share the lateral seismic force of the building with the existing RC columns to prevent building collapse. The experiment shows stable hysteric load-displacement curve.

Seismic performance capacity of CFT seismic retrofit method was studied through cyclic loading test. The added CFT columns share the lateral seismic force of the building with the existing RC columns to prevent building collapse. The experiment shows stable hysteric load-displacement curve

There are various method for evaluating the durability life of concrete structures due to salt damage . The best way is to perform a corrosion test for a rebar embedded in concrete specimen was exposure to marine environment. However, this method has the disadvantage that it takes a long period of time. Also, accelerated corrosion test which was complemented complements the time-consuming weakness is limited to apply because it could not reveal a correlation between long-term exposure test. Accordingly, the purpose of this study is to derive a correlation coefficient between cycle drying -wetting accelerated corrosion test and long-term exposure test. Corrosion initiation time was measured in four types of concrete samples, i.e., two samples mixed with fly ash(FA) and blast furnace slag(BS), and the other two samples having two water/cement ratio(W/C = 0.6, 0.35) without admixture(OPC 60 and OPC 35). The accelerated corrosion test was carried out by two case, i.e., one is a cyclic drying-wetting method(case 1), and the other is a artificial seawater ponding test method(case 2). Whether corrosion occurs, it was measures using half-cell potential method. The results indicated that case 1 is to accelerated the corrosion of rebar about 24~36% as compared with case 2, then the corrosion of rebar embedded in concrete occurred according to the order of OPC60, FA, BS, OPC35. Correlation coefficient between accelerated corrosion test and long-term exposure test, case 1 is 4.23 to 5.42, and case 2 is 6.54 to 7.82.

Connection details were developed for the composite column using high strength steel angles. Load-carrying capacity, deformation capacity, and load transfer mechanism of three beam-to-column joint specimens were evaluated under cyclic load tests. In the experiments, mega columns were used for the application in high-rise buildings

This paper proposed a new type of seismic damper based on yielding of a cantilever type steel element. The hysteretic behavior and energy dissipation capacity of the proposed damper were investigated via component tests under cyclic loads. The experimental results indicated that the damping device had stable restoring force characteristics and a high energy dissipation capacity.

풍하중 및 지진하중등 횡하중이 작용하는 무량판 슬래브는 전단파괴와 같은 취성파괴를 지연시키기 위해서 충분한 전단강도와 연성능력을 보유하여야 한다. 본 연구에서는 반복 횡하중을 받는 무량판 슬래브의 전단강도와 변형성능을 고찰하기 위하여, 무보강 및 전단 보강된 총 4개의 내부기둥-슬래브 접합부를 실험하였다. 실험결과, 전단보강 슬래브의 이방향 전단강도는 무보강 슬래브보다 최대 1.5배까지 증가시켜 적용하는 콘크리트구조설계기준(KCI)과 ACI 318-02 기준은 중력하중만이 작용하는 경우에는 적절하나 조합하중 특히 횡하중의 영향이 클 경우에는 매우 불안전측 이었다. 한편, 변형성능 측면에서 슬래브-기둥 접합부의 1.5% 횡변위 성능을 확보하기 위하여 이방향 전단강도에 대한 중력하중비를 40%이하로 제한한 ACI-ASCE 352 위원회의 권고는 안전측인 것으로 나타났다.