This paper described a method for analyzing the structural performance of a metal container used for disposing radioactive waste generated during the decommissioning of a nuclear power plant, and numerical analysis results of a method for reinforcing the container. The containers to be analyzed were those that can be used in near-surface and landfill disposal facilities scheduled to be operated at the Gyeongju radioactive waste disposal facility. Structural reinforcement of the container was performed by lattice reinforcement, column reinforcement, and bottom plate reinforcement. Accordingly, a total of 14 reinforcement cases were modeled. The external force causing damage to the container was set equivalent to the impact of a 9-m fall, accounting for the height of the vault at the near-surface disposal facility. The reinforcement methods with a high contribution to the structural performance of the container were concluded to be lattice and column reinforcements.

Licensing for the application of the Polymer Concrete High Integrity Container (PC-HIC) to nuclear power plants has been completed or is in progress. Approval for the expanded application to all domestic nuclear power plants has been completed to utilize the 860 L PC-HICs for the 2nd stage surface repository, and the regulatory body is reviewing the license application to use the 510 L PCHICs for the 1st stage underground repository in the representative nuclear power plants. The 860 L PC-HICs, which have been licensed for all domestic nuclear power plants, will be used for safe storage management and disposal of low-dose dried concentrate waste and spent resin, and a total of 100 units is expected to be supplied to representative nuclear power plants that have been licensed first. The 510 L PC-HICs are planned to be used for underground disposal of high-dose spent resin and dried concentrate waste. Prior to the application of PC-HICs to nuclear power plants and disposal to the repository, it is necessary to establish realistic and reasonable requirements through close consultations between waste generator and disposal operators to ensure the suitability for disposal of PC-HIC packages and to carry out disposal delivery and acceptance work. Since the Polymer Concrete High Integrity Container (PC-HIC) has long-term integrity of more than 300 years and the barrier does not temporarily collapse, spent resin and dried concentrate waste, which are radioactive wastes to be solidified, can be disposed of much more safely in PC-HIC packages than solidified types. Acceptance criteria for the PC-HIC packages should be prepared fully reflecting the advantages of PC-HIC, and quality assurance methods for physical/chemical/radiological characterization results based on the Waste Certification Program (WCP) should be supported. In addition, infrastructure should be secured for safe transportation, handling, and storage of the PC-HIC packages. In this paper, we have tried to find a reasonable acceptance criteria, quality assurance method, and infrastructure level according to the dose and disposal conditions of PC-HIC packages.

The Deep Borehole Disposal (DBD) method has various advantages, such as minimizing the use of site area and corrosion of the disposal container and improving long-term structural safety. However, it is necessary to review the problems that may occur in various technologies related to the emplacement and retrieval of the disposal container and the sealing of the borehole. Therefore, the purpose of this study is to evaluate the structural integrity of an emplacement and retrieval device (hereinafter, the disposal container connecting device) of a DBD container. The disposal connecting device was evaluated according to ANSI 14.6 and NUREG-0612 standards. The allowable stress should be less than the yield strength under the load condition of 3g. The length of the disposal container connecting device was about 2,900 mm, the diameter was 406 mm, and the weight was about 1.2 tons. In addition, 10 disposal containers weighing up to 2.2 tons were handled. The disposal container connecting device was made of stainless steel, and the maximum operating temperature was about 300°C. For structural evaluation, ABAQUS finite element analysis program was used. The analysis model was modeled only 1/2 part considering symmetry condition. The analysis model was modeled using 410,431 nodes and 344,119 solid elements. Three times load was applied to the weight of the disposal container. Axisymmetric conditions were applied to the symmetrical surface of the disposal container, and vertical restraints were applied to the upper lifting lugs. A surface-to-surface contact condition was applied to the part where the contact occurred. As a result of the analysis, the greatest stress was generated at the part supported by the clamp at the disposal container connector at 168.9 MPa. In the lugs and pins connecting the guide and the connecting device, a stress of 530.1 MPa was generated by shearing. In the bolts of the disposal container connecting device, a stress of 498MPa was generated and the safety margin was 1.73. A stress of 486.1 MPa was generated in the disposal container connecting device, and the safety margin was the smallest 1.16. As a result of the analysis, all components of the disposal container connecting device showed a safety margin of 1.16 or more at the maximum operating temperature and satisfied the allowable stress.

Currently, the most widely accepted disposal concept for long-term isolation of high level radioactive waste including spent nuclear fuels is to disposal in a deep geological repository designed and constructed with multiple barriers composed of engineered and natural barriers so that the waste can be completely isolated in a stable deep geological environment. In this concept, an important consideration is the heat generated from the waste due to the large amount of fission products present in the high level waste loaded in the disposal container. For safe and complete isolation of high level radioactive waste in the deep geology, the disposal concepts that meet the thermal requirements for the disposal system design have been developed by harmonizing the thermal characteristics of engineered and natural barriers in Korea. In this paper, the deposition hole configuration and the decay heat dissipation area (surface area) of disposal container were considered for the efficient thermal management in the deep geological disposal concept. Heat transfer through the waste form, its container and surrounding components and the rock will be mainly by conduction. Heat transfer by radiation and convection can be negligible after backfilling. When considering heat conduction, according to Fourier’s law, if the thermal conductivity of the repository components is the same, the greater the heat dissipation area and the adjacent temperature gradient, the greater the conduction effect. Therefore, rather than the conventional concept of loading 4 PWR spent fuel assemblies per disposal container and placing one disposal container in a deposition hole, it is better to load one assembly per disposal container and place 4 disposal containers in a deposition hole. In this case, it was found that the disposal area could be reduced through efficient thermal management. Considering this thermal management method as an alternative to the concept of deep geological disposal, additional research is needed.

In this study, a drop analysis of metallic disposal containers for radioactive wastes is performed according to accident scenarios at the disposal site. The weight of the disposal container is about 8 tons, and the ingot-type wastes are loaded in the disposal container. To simulate the floor of the disposal site as the impact target, the reinforced concrete pad is modeled. High impact energy of the disposal container due to their heavy weight and high drop height causes excessive deformation and failure of the concrete target having relatively weak strength. Dynamic growth of cracks due to such failures causes penetration and delamination of concrete. Since the impact force delivered to the container strongly depends on the failure of the concrete pad, it is important to properly simulate the failure of the concrete in the drop analysis. A material erosion method can be used to simulate the concrete failure. In the case of applying erosion based on the finite element method (FEM), the element is deleted when the element exceeds a certain criterion, which causes material and energy loss problem. To solve this problem, mesh-free methods such as smoothed particle hydrodynamics (SPH) can be commonly used, but the mesh-free method has the disadvantage of incurring high numerical cost. Therefore, an adaptive method combining SPH and FEM-based SOLID elements is used for concrete target modeling to simulate excessive deformation and failure of the concrete target. In the adaptive coupling method of SPH and SOLID, the concrete target is first modeled as a solid element. When the damage of concrete exceeds the failure criterion, the solid element is eroded and the SPH element replacing the solid element is activated. Since the activated SPH element continues to participate in the impact, the problem of loss of materials and energy can be effectively solved. In this way, analysis results consistent with actual physical phenomena can be obtained.

Radioactive waste disposal facility in Korea, radioactive waste packaged in 200 L drums is placed in a concrete disposal container and disposed of at an underground silo type (cave) disposal facility. At this time, the disposal container cover is seated on the top of the disposal container, and if the disposal container and the cover are not completely combined, the container cover is raised up from the top of the disposal container, so safety problems may occur when stacking the disposal container. Therefore, various methods exist to secure a margin for the pure height inside the disposal container. The disposal container cover only covers the upper surface of the container to shield radiation, and structural performance is not required. Therefore, the method of processing the cover, such as a method of making the cover of the disposal container thin, is the easiest method to apply. In this study, a method to reduce the thickness of the cover of a concrete disposal container was devised, and structural performance under usability conditions such as lifting and seating was analyzed. In addition, the disposal container cover has a reinforced concrete form in which dissimilar materials (concrete and steel) are combined, an integrated analysis was performed to secure the reliability of the analysis results for this, and the analysis results were described. It was found that the proposed disposal container cover structure can improve usability by reducing the stress concentration phenomenon.

본 연구에서는 사전연구로부터 사용후핵연료의 처분용기 원형모델로 제안된 처분용기의 전체 크기와 배열을 평가하기 위하여 일련의 공학적 분석을 수행하였다. 그러한 노력의 결과 용기 내부 저장통의 배열형태와 외곽쉘과 상하부 뚜껑의 두께와 같은 새로운 설계변수를 도출하였다. 공학적 분석 작업에는 처분용기의 기계구조 해석 결과를 근거로 도출된 용기의 규격자료에 대한 방사선 안전성 측면에서의 타당성을 검토하기 위하여 방사선차폐 해석과 핵 임계 해석 등이 수행되었다. 처분용기 내부 삽입체의 직경 변화에 따른 구조안정성 해석 결과에 따르면, 직경 102cm 일 때 극한 외압조건은 물론 정상적인 외압조건 하에서도 최대 Von Mises 응력이 안전계수 2.0을 만족하는 것으로 나타났다. 이 경우에서도 핵 임계 및 방사선차폐 해석 결과 안전기준치를 만족시키며, 무게는 20톤 가량 줄어드는 효과가 있는 것으로 나타났다.