풍력 자원의 단기 예측 가능성은 풍력 발전 단지의 경제적 타당성을 평가하는 중요한 요소이다. 본 연구에서는 풍력 자원의 단기 예측 가능성을 향상시키는 방법의 하나로 베이지안 칼만 필터를 후처리 과정으로 적용하였다. 이때 추정된 모델과 관측 데이터의 상관관계를 평가하기 위하여 일정 시간 동안 베이지안 칼만 훈련 기간이 요구된다. 본 연구는 여러 훈련 기간에 따라 예측 특성을 정량적으로 분석하였다. 태백 지역에서는 3일 단기 베이지안 칼만 훈련으 로 기온과 풍속을 예측하는 것이 다른 훈련 기간을 적용할 때보다 우수한 예측 성능을 보였다. 반면 이어도는 6일 이 상의 베이지안 칼만 필터의 훈련 기간을 적용한 경우 가장 좋은 예측 성능을 나타낸다. WRF 예측 성능이 떨어지는 사 례에서 베이지안 칼만 필터의 예측 성능향상이 뚜렷하게 나타나며, 반대로 WRF 예측이 정확한 지점에서는 필터적용에 따른 성능향상 정도가 약한 경향을 가진다.

The analytical investigations of the filtering efficiency with multi-layered stainless screen filter, which is designed to generate swirling stream of micro metal dust from industrial manufacturing processes, were conducted. Compared to general filter dust collecting using bag filter, it can be expected that the metallic screen filters in this study enable the higher dust collecting efficiency of a system to be maintained even under harsh filtering conditions. The CFD analysis includes dust particles behavior, filtering efficiency, and pressure loss in the flow-field. The results show that the proposed 16 layered screen filter is able to collect 10 microns metal dust up to 97 % under 487.84 ㎩ differential pressure.

목 적: 정상인이 선호하는 칼라필터렌즈가 안구의 추적운동과 읽기능력에 영향을 미치는지를 알아보고자 하였다. 방 법: 정상시력과 색각이상이 발견되지 않는 20대 23명을 대상으로 크로마젠 렌즈의 칼라 8가지 중에서 선호하는 칼라와 선호하는 않는 칼라를 선택하게 한 후 칼라필터렌즈 착용을 통하여 안구 추적운동과 관련된 주시횟수, 안구운동역행과 읽기능력과 관련된 독서 이해력을 검사하였다. 결 과: 선호하는 칼라는 파란색이 전체 26.1%를 차지하였으며, 선호하는 칼라를 이용한 주시횟수는 평균 23.7±23.65회(p<0.01, t=-4.69) 증가하였으며, 안구운동의 역행은 평균 7.9±6.1회(p<0.01, t=-6.17) 증 가함을 보였으며 통계학적 유의성이 있었다. 독서이해력은 평균 8.2±14.3%(p=0.01, t=-2.77) 향상을 보였 다. 주시횟수에 대한 나안 상태와 선호하는 칼라필터렌즈 사이의 피어슨 상관관계(r=0.87, p<0.01)는 높게 나타났고, 역행에 대한 상관관계는 높은 양의 상관관계(r=0.96, p=0.00)를 나타냈다. 그러나 독서이해력은 약한 양의 상관성을 가졌다(r=0.20, p=0.01). 결 론: 선호하는 칼라필터렌즈 안경을 착용하고 독서했을 때, 주시횟수와 증가와 안구운동의 역행이 증가 가 나타났으며, 이로 인하여 독서 이해력이 증진되었다고 추정할 수 있다.

PURPOSES: The nonlinear model of fatigue cracking is typically used for determining the maintenance period. However, this requires that the model parameters be known. In this study, the particle filter (PF) method was used to determine various statistical parameters such as the mean and standard deviation values for the nonlinear model of fatigue cracking. METHODS: The PF method was used to determine various statistical parameters for the nonlinear model of fatigue cracking, such as the mean and standard deviation. RESULTS : On comparing the values obtained using the PF method and the least square (LS) method, it was found that PF method was suitable for determining the statistical parameters to be used in the nonlinear model of fatigue cracking. CONCLUSIONS : The values obtained using the PF method were as accurate as those obtained using the LS method. Furthermore, reliability design can be applied because the statistical parameters of mean and standard deviation can be obtained through the PF method.

The purpose of this study is to develop the automatic water wank for rural living water with a built-in filter device. For this purpose, the author carrying out the design and production of devices such as a stacked plate filter, automatic water tank and water purification equipment, main control system and solenoid valve, solar cell, battery, water gauge, flowmeter and pump, etc. As a result, the author obtained very good results which satisfy all the research and development objectives planned. In addition, the water quality test results received, it is determined that the water is suitable for rural living water standards of the developed prototype.

세라믹 소재는 고분자 나노섬유 분리막과 비교하여 우수한 열안정성과 고투과 물성을 가짐으로써 지난 10여 년간 많은 주목을 이끌어왔다. 최근 들어 높은 다공도와 유량을 가지는 세라믹 섬유 분리막이 금속 산화물을 이용하여 주로 전기 방사법에 의해 제조되어 왔는데, 이러한 세라믹 분리막의 제조 단가를 감소하며 성능을 향상시키기 위해 나노섬유의 선택층 을 가지는 세라믹 분리막들이 전기방사 공정과 개질 과정을 통해 개발되었다. 본 리뷰에서는 최근 수년간 세라믹 섬유 분리 막의 개발을 위한 연구 동향에 대하여 정리하였다.

The characteristics of filter/adsorber granular activated carbon (F/A GAC) were investigated by measuring various parameters, which include surface area, pore volume, abrasion number, floater, and water-soluble ash. The correlation between parameters was also evaluated. Moreover, rapid small-scale column test (RSSCT) was conducted for adsorption characteristics. Thirteen F/A GAC were tested, and the average values of abrasion number and water-soluble ash were 88.9 and 0.15%, respectively. F/A GAC with the larger external surface area and greater mesopore volume had the lower abrasion number, which indicated that it was worn out relatively easily. Water-soluble ash of coconut-based GAC (about 2.6%) was greater than that of coal-based GAC (less than 1%), and the pH of solution was increased with GAC, which had the higher water-soluble ash. On the other hand, floater of thirteen F/A GAC was divided as two groups, which one group had relatively higher floater (2.7~3.5%) and the other group had lower floater (approximately 0.5%). The results of RSSCT indicated that coconut-based GAC (i.e. relatively higher water-soluble ash) had less adsorption capacity. Moreover, adsorption capacity of coal-based GAC with larger surface area and greater mesopore volume was superior to others.

The coronagraph is an instrument that enables the investigation of faint features in the vicinity of the Sun, particularly coronal mass ejections (CMEs). So far coronagraphic observations have been mainly used to determine the geometric and kinematic parameters of CMEs. Here, we introduce a new method for the determination of CME temperature using a two filter (4025 °A and 3934 °A) coronagraph system. The thermal motion of free electrons in CMEs broadens the absorption lines in the optical spectra that are produced by the Thomson scattering of visible light originating in the photosphere, which affects the intensity ratio at two different wavelengths. Thus the CME temperature can be inferred from the intensity ratio measured by the two filter coronagraph system. We demonstrate the method by invoking the graduated cylindrical shell (GCS) model for the 3-dimensional CME density distribution and discuss its significance.

Mycelial growth of oyster mushroom is very important. Because the management of careless mycelial growth can be caused contamination and low yield of fruit body. To reduce contamination, it is necessary to maintain clean the cooling room, inoculation room and cultivation room. In generally, most farmers maintain clean cooling room and inoculation room. However It is very difficult to cleanly manage the culture room. So we set up HEPA filter in the culture room of three farms, investigated the density and type of drop microorganism before and after using HEPA filter in the cultivation room. The density of drop microorganism after using HEPA filter in cultivation room was lower than that of before using HEPA filter. The density of drop microorganism of three farms was showed same results. Also when using a HEPA filter in the cultivation room, the contamination rate was reduced.

The high-order Laplacian-type filter, which is capable of providing isotropic and sharp cut-off filtering on the spherical domain, is essential in processing geophysical data. In this study, a spherical high-order filter was designed by combining the Fourier method with finite difference-method in the longitude and latitude, respectively. The regular grid system was employed in the filter, which has uniform angular spacing including the poles. The singularity at poles was eliminated by incorporating variable transforms and continuity-matching boundary conditions across poles. The high-order filter was assessed using the Rossby-Haurwitz wave, the observed geopotential, and observed wind field. The performance of the filter was found comparable to the filter based on the Galerkin procedure. The filter, employing the finite difference method, can be designed to give any target order of accuracy, which is an important advantage being unavailable in other methods. The computational complexity is represented with 2n-1 diagonal matrices solver with n being the target order of accuracy. Along with the availability of arbitrary target-order, it is also advantageous that the filter can adopt the reduced grid to increase computational efficiency.

Two step rapid filter system as a pre-treatment for the injected water into aquifer storage and recovery (ASR) in Korea was developed to reduce physical blockage and secure the volume of the injected water. First, single rapid sand filters with three different media sizes (0.4~0.7, 0.7~1.0 and 1.0~1.4 mm) were tested. Only two sizes (0.4~0.7 and 0.7~1.0 mm) satisfied target turbidity, below 1.0 NTU. However, they showed the fast head loss. To prevent the fast head loss and secure the volume of the injected water, a rapid anthracite filter with roughing media size (2.0~3.4 mm) were installed before a single rapid sand filter. As results, both the target turbidity and reduction of head loss were achieved. It was determined that the media size for a rapid sand filter in two step rapid filter system (i.e. a rapid anthracite filter before a rapid sand filter) was 0.7~1.0 mm. In addition, the effects of coagulant doses on the removal of natural organic matter (NOM), which might cause a biological clogging, were preliminarily evaluated, and the values of UV254, dissolved organic carbon (DOC) and SUVA were interpreted.

유해조류의 생물학적 제어를 위하여 여과능이 입증된 패류와 동물플랑크톤을 혼합적용하고, 현장적용 가능성을 검토하였다. 실험수는 매년 남조 Microcystis aeruginosa가 대발생하는 일감호 (서울)의 현장수, sediment, 배지를 대형 수조에 일정량 넣고 인위적으로 조류대발생을 일으켜 유지하고 있는 실험수를 이용하였다. 실험은 동물플랑크톤만 처리한 Z군 (40 individuals L-1), 패류만 처리한 M군 (2 individuals L-1), 동물플랑크톤과 패류를 모두 첨가한 ZM군 (Z, M군의 밀도를 합한 것)으로 설계하였다. 수심별 조류제어 효과를 확인하기 위하여 표층, 중층에서 각각 일정량의 실험수를 꺼내 엽록소량의 경시적 변화를 측정하였다. 결과, 중층의 모든 처리구에서 Chl-a의 감소를 보였으며 24시간째 Z군은 63.2%의 제어율을 보인 반면, M군과 ZM군은 각각 79.8%, 90.8%의 제어율을 나타내 뚜렷한 억제효과를 보였다. 표층의 경우, Z군과 ZM군은 각각 51.9%, 63.4% 등으로 50% 이상의 억제효과를 보인 반면, M군의 경우 대조군의 27.4%로서 가장 낮은 제어율을 보였다. 결과를 종합하면, 두 생물제재의 혼합이 수층에 상관없이 그 효과는 입증되었으나 남조 M. aeruginosa의 부유성을 감안한다면, 패류의 적용수심이 조류제어에 매우 중요한 인자임을 알 수 있었다. 따라서 생물제재의 혼합적용이 보다 높은 효과를 보였으며 조류의 생리적 특성과 생물 제재간의 상호관계에 대한 세밀한 연구가 요구되었다.

본 연구에서는 백혈구 친화 흡착 및 분리 가능한 기능성 필터를 개발하기 위해, 직경이 3μm이하를 가지는 부직포 표면에 전기 방사법을 이용하여 평막형태의 혈액분리용 필터를 제조하였다. 전기방사는 고분자 농도, 유량, 인가전압, 에어갭 등의 변수를 조절하여 나노/마이크로 구조를 최적화하였다. 분리막의 단면과 표면 모폴로지는 전계방출형주사현미경(FE-SEM)을 이용하여 관찰하였다. 화학적 표면처리를 통해 친수성을 증가시켰으며, 혈액적합성 평가결과 우수한 것을 확인 할 수 있었다.

In this study, the porous ceramic filter was developed to be able to remove both dust and hazardous gas contained in fuel gas at high temperature. The porous ceramic filters were fabricated and used as a catalyst support. And the effects have been investigated such as the mean particle size, organic content and addition of foaming agent on the porosity, compressive strength and pressure drop of ceramic filters. With the increase of mean powder size and the organic content for the cordierite filter, the porosity was increased, but the compressive strength and pressure drop were decreased. From the results of the research, the optimum condition for the fabrication of ceramic filters could be acquired and they had the porosity of 58%, the compressive strength of 13.4 MPa and the pressure drop of 250 Pa. It was expected that this ceramic filter was able to be applied to the glass melting furnace, combustor, and dust/toxic gas removal filter.