고밀도 폐유리가 콘크리트를 포함하는 건설 재료로 사용 가능함이 밝혀짐에 따라 본 연구에서는 고밀도 폐유리를 잔골재로 적용한 RC 부재의 구조적 거동을 평가하고자 휨거동 실험을 수행하고 그 결과를 비선형 유한요소해석 결과와 비교 검토하였다. 그 결과, 고밀도 폐유 리를 잔골재로 사용하게 되면, 균열 개수가 감소하고 균열 간격 및 압괴 면적이 증가하였다. 또한, 고밀도 폐유리를 잔골재로 대체한 부재는 높은 처짐 단계에서 연성이 감소되었다. 이러한 이유로 천연골재를 사용한 부재와 동일한 방법의 해석 기법은 고밀도 폐유리를 잔골재로 대체한 부재의 휨거동에 대한 초기강성, 항복하중 및 최대하중을 제대로 예측하지 못하는 것으로 나타났으나, 압괴 진전에 따른 중립축 깊이가 감소하는 것을 해석적으로 구현하게 되면, 비선형 유한요소 해석 결과가 실험결과를 비교적 잘 예측하는 것으로 나타났다.

The focus of this study is to investigate the ASR of concrete incorporating pre-treated soda-lime glass as aggregates. The glass aggregates were pre-treated with three different techniques, i.e. Ca(OH)2, NaOH and the mixed solution. The results indicate that all the pre-treatment techniques showed a decrease effect on ASR and such an effect increase with treatment time, the mixed solution showed the best effect. The pre-treated glass aggregate at the mixed solution at 80℃ for 7 days providing a 45% reduction in the expansion caused by ASR, and it can be considered innocuous based on ASTM C1260.

In this study, the fundamental properties of concrete using industrial waste as aggregate were evaluated. The concrete specimens were prepared using the steel slag as coarse aggregate and heavyweight waste glass. It was found that when the electric arc furnace slag substitution ratio increased, air contents and density also increase. However, the slump is decreased with an increase in the substitution ratio of electric arc furnace slag.

In this paper, the flexural behavior of RC member recycled heavy weight waste glass as fine aggregate was evaluated by finite element analysis. From the results, the analytical results do not reflect the experimental results. This is because the stress-strain curve of the concrete specimen obtained from the compression test was used as the input data for the ABAQUS. Therefore, the ABAQUS, based on the experimental results of the stress-strain relationship of concrete, predicted the load-displacement relationship without considering the reduction in load capacity.

현재 많은 국가들이 천연자원이 고갈되는 문제에 직면해있고, 골재 공급이 어려운 상황이다. 이러한 상황을 고려하기 위하여 대체자원 개발을 위한 다양한 연구들이 수행되어왔다. 특히, 방사성 폐기물의 차폐를 위해 사용되는 고밀도 채움재는 많은 양의 골재를 필요로 한다. 또한, 채움재의 차폐 성능 개선을 위해서는 채움재의 밀도 증가가 요구된다. 따라서 밀도가 높은 산업폐자원의 중량콘크리트 골재로의 활용성을 확대하기 위한 기초 자료의 제공을 위해 본 연구가 수행되었다. 실험결과, OPC의 경우, 고밀도 폐유리에 의해 감소된 콘크리트의 강도는 제강슬래그를 사용해도 개선되지 않으나, 광물질 혼화재를 결합재로 사용하면 성능이 개선되었다. 따라서 고밀도 폐유리와 제강슬래그를 중량 콘크리트에 적용할 경우, 광물질 혼화재와 함께 사용하고, FA보다는 BFS를 사용하는 것이 바람직한 것으로 나타났다. 한편, 제강슬래그를 중량콘크리트의 골재로 대체할 경우, 제강슬래그의 높은 밀도로 인하여 탄성계수와 차폐성능의 개선이 가능할 것으로 판단된다.

건전자제품의 개발과 생산기술에 비교하여 폐유리의 재활용을 위한 기술개발은 상대적으로 미흡하여 자원낭비와 환경오염이 가속화되고 있다. 해외에서는 이 분야에 대한 기술개발이 활발하게 이루어지고 있으나 국내의 경우, 그 관심도가 부족하여 폐유리를 불법투기 또는 매립으로 처리하고 있는 실정이다. 폐유리는 시멘트와 수화반응시 포졸란 반응가능성이 있는 것으로 확인되어 경화 콘크리트의 물리적 성질을 향상시키고 굳지 않은 콘크리트의 레올로지 특성을 개선하여 블리딩의 저감 및 수화열 발생의 억제 등에 효과적인 것으로 보고되고 있다. 따라서 본 논문에서는 폐유리를 잔골재로 사용한 차폐콘크리트의 알칼리-실리카반응이 팽창에 미치는 영향을 분석하고 폐유리 혼입에 의한 알칼리-실리카반응의 팽창을 억제하기 위한 방안으로 적정 혼화재료를 사용하여 차폐콘크리트의 내구성능을 평가하였다.

최근 들어, 첨단산업의 발전으로 다양한 종류의 산업폐기물이 빠르게 발생하고 있다. 특히, 산업폐기물 중 중금속을 함유한 고밀도의 폐 브라운관 유리는 재처리 비용과 환경오염 문제로 인해 전량 매립‧처분되고 있다. 따라서 이러한 폐자원을 재활용하기 위한 기초 연구가 필요한 실정이다. 이에 본 연구에서는 중금속이 함유된 CRT 폐유리를 잔골재로 대체한 모르타르 시험체의 기초 물성과 방사선 차폐 성능을 분석하여 차폐 재료로의 활용성을 평가하였다. 연구 결과에 따르면 중금속을 함유한 CRT 폐유리를 잔골재로 대체한 시험체의 겉보기 밀도가 상승하였으며, 압축강도와 휨강도는 저하되는 현상을 나타냈다. 또한, 납 성분이 다량 함유된 폐유리 대체 시험체는 일반 모르타르 시험체보다 저에너지의 차폐 성능이 상승하는 효과를 보였으며, 122KeV·57Co 방사선원에 대해서는 일반 모르타르 시험체보다 2.5배 높은 선형감쇠계수를 나타냈다.

A large amount of CRT waste has been generated due to the interruption of analog broadcasting in 2012. In particular, CRT glass has been pointed out as a cause of environmental pollution because it contains a large amount of heavy metals such as lead for electromagnetic shielding. In this study, the electrical resistivity of mortar specimen using CRT waste glass as fine aggregate was measured to investigate the relationship between electrical resistivity and shielding characteristics.

In this study, the properties of mortar substituted heavyweight waste glass were evaluated. From the results, the flow value and density increased as the substitution ratio of heavyweight waste glass increased, and compressive and flexural strength decreased.

In this paper, the flexural behaviors with substitution ratio of heavyweight waste glass are compared and evaluated in reinforced concrete members. From the results, when the heavyweight waste glass was used as the fine aggregate, the yielding load (Py) and maximum load (Pu) were less affected. However, the load capacity of the RC member was gradually reduced on the large deformed stage when all of the fine aggregate was replaced by heavyweight waste glass.

In this study, the characteristics of density and flow value of mortar substituted heavy weight waste glass were compared with the aggregate ratio. From the results, the density and flow value increase as the substitution of waste glass increase, however, it is considered that the increase of the aggregate ratio of 30% or more does not contribute to the increase of the density.

Filler material (concrete or mortar) has been used for shielding radioactive waste, however, it is proceeded out evaluation for radiation shielding performance. So, it is needed to check the property in the shielding performance. Therefore, in this paper, mechanical properties of concrete was evaluated for the applicability using heavyweight waste glass as fine aggregate of filler material. From the test results, compressive and elasticity modulus were significantly affected by substitution of heavyweight waste glass, however, it could be improved the performance by using mineral admixture as binder.

Electrical waste, such as heavy weight waste glass, has become a global concern in terms of resource recycling. At the same time, aggregate is one of the most widely used infrastructure materials, and it is being exhausted. So, in this paper, the heavy weight waste glass is considered as aggregate due to its physical characteristics and chemical composition. From the results, when the heavy weight waste glass substitution ratio increase, the compressive strength and flexural strength decreased.

In this paper, the sulfate resistance of concrete substituted the crushed heavy weight waste glass as fine aggregate are compared and evaluated. From the results, when heavy weight waste glass substituted ratio increase, the reduction rate of compressive strength is decreased. So, the sulfate resistance is improved by using heavy weight waste glass in concrete.

It is necessary to investigate the possibility of high density material as an ingredient in the manufacturing of radiation shielding material. In this study, the suitability of heavy weight waste glass as a shielding material is considered. From the results, it was found that when the heavy weight waste glass substitution ratio increases, radiation shielding performance also increase.

In this paper, the flexural behavior of RC member recycled heavy weight waste glass as fine aggregate was evaluated by finite element analysis. From the results, yield point and maximum load decreased with decreasing concrete strength and elastic modulus. Also, the finite element analysis program does not reflect the ductility loss of RC members using heavy weight waste glass as fine aggregate.

In this paper, the sulfate resistance of concrete substituted the crushed heavy weight waste glass as fine aggregate are compared and evaluated. From the results, when heavy weight waste glass substituted ratio increase, the reduction rate of compressive strength is decreased. So, the sulfate resistance is improved by using heavy weight waste glass in concrete.

It is necessary to investigate the possibility of high density material as an ingredient in the manufacturing of radiation shielding material. In this study, the suitability of heavy weight waste glass as a shielding material is considered. From the results, it was found that when the heavy weight waste glass substitution ratio increases, radiation shielding performance also increase

As the industrialization is rapidly growing, the quantities of industrial waste glass have been quickly increased. However the most of them are not recycled. Therefore, it is needed to investigate the possibility of industrial waste glass as concrete material ingredient. In this paper, it is compared and evaluated that the characteristics of freeze-thaw resistance according to industrial waste glass substitution ratio in concrete specimens. From the results, the weight change was not affected by the waste glass substitution ratio. And, the relative dynamic modulus of elasticity was increased slightly with the waste glass substitution ratio. The relative dynamic modulus of elasticity was above 80% up to 300cycles in all of the mixes.

Along with the increased display devices, the supply for LCD waste glass has rapidly increased. However, there is a problem for recycling. In this study, the possibility of using LCD waste glass as a substitutive material of fine aggregate is determined and compared from the test of the compressive strength and split tensile strength. Finally, it is possible to confirm the results of the failure aspect and analysis of this test.