토양 하부 및 지하수에 생존하고 있는 미생물들이 지하수의 산화/환원전위 변화에 관여하는 사실을 알아보기 위해 미생물들을 주입한 수용액의 시간별 Eh 변화량을 측정하였다. 황산염환원 미생물이 주입된 경우 수용액의 Eh값이 5일 만에 -120 mV에서 -500 mV까지 떨어졌으며, 실험 결과 디설프리칸스 세균이 불가리스 세균보다 수용액을 환원하는 능력이 상대적으로 좋았다. 철환원 미생물인 스와넬라 세균의 경우 Eh값이 황산염환원 세균보다 조금 높은 -400 mV를 보여 주었다. 금속환원미생물에 의해 수용액의 Eh값이 떨어지는 동안 용존 황산염 혹은 산화철이 환원되고 맥키나와이트(FeS)라는 황화광물이 형성되기 시작하였다. 이러한 실험 결과를 바탕으로 일반 지하수의 산화/환원전위는 그 지하수에 생존하고 있는 지하미생물들의 대사 활동에 많은 영향을 받고 있다는 사실과 극환원된 지하수 및 생기원 황화광물들이 풍부한 지하 환경은 산화 핵종들이 환원된 형태로 침전되어 핵종 이동이 억제될 가능성이 높은 곳으로 판단된다.

The SBR(Sequencing Batch Reactor) process is ideally suited to treat high loading wastewater due to its high dilution rate. SBR operates by a cycle of periods consisting of filling, reacting, settling, decanting and idling. The react phases such as aeration or non-aeration, organic oxidation, nitrification, denitrification and other biological reactions can be achieved in a reactor. Although the whole reactions can be achieved in a SBR with time distributing, it is hard to manage the SBR as a normal condition without recognizing a present state. The present state can be observed with nutrient sensors such as NH4+-N, NO2--N, NO3--N and PO43--P. However, there is still a disadvantage to use the nutrient sensors because of their high expense and inconvenience to manage. Therefore, it is very useful to use common on-line sensors such as DO, ORP and pH, which are less expensive and more convient. Moreover, the present states and unexpected changes of SBR might be predicted by using of them. This study was conducted to get basic materials for making an inference of SBR process from ORP(oxidation reduction potential) of synthetic wastewater. The profiles of ORP, DO, and pH were under normal nitrification and denitrification were obtained to compare abnormal condition. And also, nitrite and nitrate accumulation were investigated during reaction of SBR. The bending point on ORP profile was not entirely in the low COD/NOx ratio condition. In this case, NOx was not entirely removed, and minimum ORP value was presented over -300mV. Under suitable COD/NOx ratio which complete denitrification was achieved, ORP bending point was observed and minimum ORP value was under -300mV. Under high COD/NOx ratio, ORP bending point was not detected at the first subcycle because of the fast denitrification and minimum ORP value was under -300mV at the time.