The aim of this study was to evaluate the probiotic properties of lactic acid bacteria (LAB) isolated from kimchi and antioxidant and anti-inflammatory activities of heat-killed LAB strains. Regarding probiotic properties, Lactiplantibacillus plantarum SMF398 and L. plantarum SMF470 isolated from kimchi can survive under artificial gastric condition and adhere strongly to HT-29 cells. The SMF398 and SMF470 strains showed strong antimicrobial activity and co-aggregation against pathogenic bacteria. The heat-killed cells of LAB (1 mg/mL) were prepared by heating at 121℃ for 15 min. MTT assay revealed that the heat-killed cells (1 mg/mL) of SMF398 and SMF470 were not toxic to HT-29 cells. The heat-killed SMF398 and SMF470 showed significantly higher DPPH and ABTS radical scavenging activities as well as β- carotene bleaching inhibitory activity than the heat-killed L. plantarum ATCC14917, a control probiotic strain (p<0.05). In lipopolysaccharide-induced RAW264.7 cells, the heat-killed SMF398 and SMF470 significantly reduced the nitric oxide production by 30.92% and 22.81%, respectively (p<0.05). Furthermore, the heat-killed SMF398 and SMF470 significantly decreased the gene expression levels of tumor necrosis factor-α, interleukin-6, inducible nitric oxide synthase, cyclooxygenase-2 up to 58.02%, 67.70%, 53.44%, 45.90%, respectively (p<0.05). These results suggest that the heat-killed L. plantarum SMF398 and L. plantarum SMF470 might be useful as antioxidant and anti-inflammatory agents.

This study aimed to investigate the effects of antioxidant and anti-inflammatory activities of heat-killed lactic acid bacteria (LAB) produced under different temperature conditions. Regarding probiotic properties, Limosilactobacillus fermentum SMF743 and Lactiplantibacillus plantarum SMF796 isolated from kimchi showed strong acid and bile salt resistance, adhesion activity onto HT-29 cells, and antimicrobial activity against pathogenic bacteria. Based on the results of thermal death time and temperature, heat-killed LAB cells (1 mg/mL) were prepared by heating at 70oC (180 min), 80oC (120 min), 100oC (30 min), and 121oC (15 min). The heat-killed SMF743 and SMF796 showed significantly higher DPPH and ABTS radical scavenging activities than live cells (p<0.05). The heat-killed SMF743 and SMF796 at 70oC or 121oC revealed stronger DPPH and ABTS radical scavenging activities and inhibition of nitric oxide production than those at 80oC or 100oC. Furthermore, heat-killed SMF743 and SMF796 at 121oC significantly reduced the gene expression levels of tumor necrosis factor-, inducible nitric oxide synthase, and cyclooxygenase- 2 up to 53.33%, 58.67%, and 83.67%, respectively, in lipopolysaccharide (LPS)-induced RAW264.7 cells (p<0.05). These results suggest that heat-killed L. fermentum SMF743 and L. plantarum SMF796 can be used as natural antioxidants and anti-inflammatory agents.

Se-79, a fission product of uranium, is present in spent nuclear fuel. Selenium is volatilized from the spent nuclear fuel during the pretreatment of pyroprocessing, and a filter composed of calcium oxide can capture gaseous selenium in the form of CaSeO3. Because Se-79 has a long half-life (3.27E5 years) and selenite ions have high mobility in groundwater, they must be immobilized in a chemically stable form for final disposal. This study used a composition of 50 TeO2 - 10 Al2O3 - 10 B2O3 - 10 Na2O - 10 CaO - 10 ZnO (mol%). High-purity powders of TeO2, Al2O3, H3BO3, Na2CO3, CaCO3, and ZnO were used as glass precursors. The mixed powders were placed in alumina crucibles and melted in an electric furnace under an ambient atmosphere at 800°C for 1 h before being cast on a carbon mold. The obtained glasses were ground into fine powders and then mixed with CaSeO3 powders. The powders were melted in alumina crucibles at 800°C for 1 h. To simulate a seleniumcaptured calcium filter, CaSeO3 was synthesized by a precipitation method using sodium selenite (Na2SeO3) and calcium nitrate (Ca(NO3)2) solutions. The glass samples were analyzed by an X-ray diffractometer (XRD). Retention of Se in tellurite glasses was analyzed by an X-ray fluorescence spectrometer (XRF) and inductively coupled plasma (ICP). The chemical durability of tellurite glass was evaluated through the PCT method.

Radioactive cesium is a heat generated and semi-volitile nuclide in spent nuclear fuel (SNF). It is released gasous phase by head-end treatment which is a pretreatment of pyroprocessing. One of the capturing methods of gasous radioactive cesium is using zeolite. After ion-exchanged zeolite, it is transformed to ceramic waste form which is durable ceramic structure by heat treatment. Various ceramic wasteforms for Cs immobilization have been researched such as cesium aluminosilicate (CsAlSi2O6), cesium zirconium phosphate (CsZr2(PO4)3), cesium titanate (CsxAlxTi8-xO16, Cs2TiNb6O18) and CsZr0.5W1.5O6. The cesium pollucite is composed to aluminosilicate framework and cesium ion incorporated in matrix materials lattices. Many researchers are reported that the pollucite have high chemical durability. In this study, the Cesium pollucite was fabricated using mixtures of aluminosilicate denoted Absorbent product (AP) and Cs2CO3 by calcination and pelletized by cold pressing. The characterization of fabricated pollucite powder and pellets was analyzed by XRD, TGA, SEM, SEMEDS and XRF. The chemical durability of pollucite powder was evaulated by PCT-A and ICP-MS and OES. Thus, the optimal pressure condition without breaking the pellets which is low Cs2O/AP ratio and pelletizing pressure was selected. The long-term leaching test was performed using MCC-1 method for 28 days with the fabricated pollucite pellets. The leachate of leaching test was allard groundwaster and Deionized water and replaced 5 contact periods which is 3 hours, 3 days, 7 days, 14 days and 28 days and analyzed by ICPMS. The leaching rate was shown two stages. The first stage was rapid and relatively large amount of nuclides were leached. The leaching rate was decreased in the second stage. The fractional release rate of this study was shown same trend. These results were similar to previous studies.

This study aimed to optimize the fermentation condition of black bean using probiotic lactic acid bacteria (LAB) and to evaluate characteristics and antioxidant activity of LAB fermented and heat-treated black bean. Two LAB strains were selected by analysis of acid resistance, bile resistance, antimicrobial activity, and antioxidant activity, and identified as Lactiplantibacillus plantarum CH9 and Lactiplantibacillus plantarum SU18 by 16S rRNA sequencing. Both strains showed similar or higher acid resistance, bile resistance and antimicrobial activity, compared to Lacticaseibacillus rhamnosus GG, a commercial probiotic strain. The heat-killed cells of CH9 and SU18 strains showed significantly (p<0.05) higher DPPH and ABTS radical scavenging activities than live cells. Fermentation of black bean (30%) treated with Alcalase using the two selected strains was found to be optimal condition, increasing viable cell count of LAB up to 10.8 Log CFU/g. During the fermentation, the titratable acidity of Alcalase-treated black bean was notably increased with concomitant decrease in the pH. LAB fermentation significantly (p<0.05) increased antioxidant activity based on DPPH and ABTS radical scavenging activities as well as total phenol content. In addition, total phenol content and antioxidant activity were significantly (p<0.05) enhanced by heat processing (121C, 15 min) of the fermented products. These findings are expected to be useful for the development of various LAB-fermented foods containing heat-killed probiotics.

Radioactive Cesium is fission products of spent nuclear fuelwith high heat generating nuclide, having a 30 years half-life. Particularly, it is important to make stable waste form because Cs-137 have high solubility and mobility at ground water. The ceramic waste form has higher thermal and structural stability and lower solubility than glass and cement waste form. Various ceramic waste forms for Cs immobilization have been researched such as aluminosilicate (CsAlSi2O6), phosphate (CsZr2(PO4)3), titanate (CsxAlxTi8-XO16) and CsZr0.4W1.5O6. Cs pollucite is incorporated radio-Cesium to aluminosilicate framework by inorganic ion-exchange with zeolite. Therefore, it is an extremely stable structure. In previous study, we are prepared Cs pollucite pellet with various ratio of Cs precursor/matrix materials, and attempted to evaluate applicability as ceramic waste form. Cs pollucite is produced by mixing Mullite and SiO2 obtained by heat treatment Kaolinite with Cs2CO3 in ratios of 0.5, 0.6, 0.7, 0.8. Optimized ratio was 0.5 revealed single pollucite phase and the others exhibited CsAlSiO4 phase with pollucite. Cs pollucite of ratio 0.5 was pelletized under various conditions and evaluated performance as waste form. herein, the pellets were cracked on surface and edges broken. Therefore, Cs pollucite having high ratio of matrix materials contained Si and Al was prepared and pelletized, and then waste form was evaluated. The Cs pollucite powder is ratio of Cs precursor/matrix materials were 0.1, 0.2, 0.3, 0.4. Pollucite powder was mixed with 1.5, 2.0wt% Polyvinyl alcohol as binder, and dried at 70°C for overnight. Afterward, these powders obtained were pressed using punch-die apparatus at 50, 100 bar for 1 hour and the pellets with about dia. 25 mm and height 10 mm was acquired. These pellets were sintered at 1,400°C for 5 hours. Subsequently, the waste forms were evaluated physicochemical test such as compression strength, thermal conductivity, thermal expansion and leaching properties analysis.