간행물

수산해양기술연구 KCI 등재 Journal of the Korean Society of Fisheries and Ocean Technology 韓國漁業技術學會誌

권호리스트/논문검색
이 간행물 논문 검색

권호

41권 3호 (2005년 8월) 7

1.
2005.08 구독 인증기관 무료, 개인회원 유료
This study was conducted in order to the experiment of bottom trawl fisheries in the sea mount of central northern pacific(30˚-40˚N, 170˚-175˚E), during the period of July 1 to August 25, 2004 by commercial trawl ship. Fishing experiment was carried out by bottom trawl, with the codend of 110mm mesh size. The number of 101 test fishing was done in the sea mount of central northern pacific during 56 days and the total catches were 198,593kg as 18 fish species, and CPUE/day and catches/day were 8.3 hours towing time and 3,546kg. Catch ratio according to each fishing ground was higher with the order of B, C, and E, and catches for B was 7,171.0kg during the towing time of 13.2 hours. Main target species were Pseudopentaceros richardsoni and Beryx splendens, there was 14.9% of damage ratio for fishing gears on catching the target fishes inhabiting on the rough sea bottom. Catches by water depth was the order of 300m below, 301-350m, 451-500m and 351-400m. It is thought that there was no problem on the mesh size because most of fishes caught from the experimental fishing was 30cm over.
4,000원
2.
2005.08 구독 인증기관 무료, 개인회원 유료
This study was conducted to survey the catches of vertical bottom longline fisheries in the sea mount of central northern Pacific(30˚-42˚N, 170˚-175˚E), during the period of July 1 to August 25,2004 by commercial fishing vessel. The number of 57 test fishing was carried out in the central northern Pacific during 43 days and the total catches were 21,092.4kg as 19 fish species, CPUE/day and catches/day were 185 baskets and 490.5kg, respectively. Main fish species caught from the experimental fishing were Squalus mitsukurii (66.3%), Coelorhyrchus asperocephaius (11.7%) and Helicolenus avius (9.8%) and, average inside diameter for fish mouth was 4.0cm over. Catch ratio according to each fishing ground was the order of F, D, J, B and C. Catch ratio fur water depth was the order of 450-500m, 350-400m, 300-350m, 400-450m, 1000-1100m and 500-550m and, main species by water depth was Squalus mitsukurii for 300-400m, Etmopterus lucifer for 300-550m, Coelorhyrchus asperocephaius far 1,000m over. Catch ratio according to the kind of hooks was higher at the hook no.6 for Squalus mitsukurii and no. 5 for Etmopterus lucifer and, catch ratio by baits was higher at squid for Squalus mitsukurii, saury and eel for Helicolemus avius and saury for Etmopterus lucifer. Accordingly, it is thought that the extension of fishing hours is needed with the reduction of damage and loss for fishing gears during fishing operation.
4,200원
3.
2005.08 구독 인증기관 무료, 개인회원 유료
As the basic study about improvement of yellow croaker drift gill net fishing implement and development of the fishing system, this study drew problem after synthetically analyzing hauling system of yellow croaker drift gill net used in the coast of Chuja Island and tested several characters and analyzed in hauling process with 5 step net hauler model for improving the problem. The analysis results are as follows. When the angle between axises of drum centers was small, it showed the tendency that hauling time was fast. Hauling time was faster when drum was 5 step rather than 3 step. When drum was 5 step, slippery phenomenon was small and hauling was stable. Tension was larger when drum was 5 step rather than 3 step. When drum was 5 step, the range of change of the maximum and minimum value was small and hauling was stable. When drum was 3 step, there was following formula between hauling time (Ht3) and angle between axises of drum centers (Ag) Ht3 : (7.15Hs-0.81) Ag-0.81, when drum was 5 step there was following formula.Ht5 : (6.45Hs-0.75) Ag0.10, here, Hs is hauling speed. When drum was 3 step and hauling speed was 28cm/sec, tension was T=0.08A83-1.60Ag3-0.49Ag+369.56(r=0.99), when drum was 5 step, tension was, T=-0.01Ag3+1.96Ag2-34.05Ag+414.58 (r-0.99), here, T was tension(g).
4,000원
4.
2005.08 구독 인증기관 무료, 개인회원 유료
Dual frequency acoustic pinger(AP) was manufactured to reduce study effect by long-term use of developed single frequency AP to prevent cetacean bycatch. Directivity characteristic of transducer was the omnidirectional pattern which showed less than ±3dB the change range of sensitivity on the beam pattern of right and left. Source power level(SPL) was 1384311pa with epoxy window before casing however after casing 1170B11Pa at sea. Dual frequency Af was tested to identify the avoidance behavior of bottlenose dolphin by its working. However the efficiency of dual frequency AP about the study effect was verified experiment repeatedly using single and dual frequency AP.
4,000원
5.
2005.08 구독 인증기관 무료, 개인회원 유료
In order to get more accurate GPS position with the changes of the inner configuration setting of GPS receiver, the authors carried out measurements of the position at known it with one antenna and two GPS receivers manufactured by same company. We have investigated the accuracies of positions according to the change of the maskangle and receiving mode of output data in inner configuration of GPS receivers, and analyzed the relationships between numbers of satellites visibility and maskangles, and values of HDOP and maskangles. When the maskangles in inner configuration were set below 20 degree, the accuracies of positions were high. But if they were became bigger than 25 degree, standard deviations ot position errors and HDOPS of positions were became bigger. Numbers of satellites visibility(y) and maskangles(x) have relations with a formula, y = -0.1662x+9.9225, and values of HDOP(y) and maskangles(x) have relations with a formula, y = 0.6035 e0.0517x. The results of position accuracies observed by two GPS receivers to the known position at same time were that average errors of position fixs by GPS receiver configured with NMEA0183 mode were 6.7m and standard deviations were 1.5m, and them by GPS receiver configured with binary mode were 5.0m and standard deviations were 1.1m respectively.
4,000원
6.
2005.08 구독 인증기관 무료, 개인회원 유료
A series of model tests carried out at the CWC of WJFEL for the purpose of prediction of resistance for the performance and improvement of resistance by attaching appendage for the ship of 50 knots class planing hull. The resistance performance evaluation has been carried out for the bare hull and for the appendage hull with two different depth of vertical type wedges. In the bare model test, trim and sinkage is calculated for the planing hull and the resistance is calculated. For minimizing the resistance, wedge appendage is attached and tested. Analysis and tests shows that for a 12.5mm wedge, resistance is minimum and overall power tallied to 5636ps.
4,000원
7.
2005.08 구독 인증기관 무료, 개인회원 유료
In order to estimate the effective horse power(EHP) in towing net of a bottom trawl ship, the ship's resistance was calculated by using a series data of Yamagata and Wigley formula. Also the effective horse power for a ship(EHPs) was estimated versus the ship speed in sailing and the propulsive efficiency was calculated with the brake horse power and the effective horse power. Then the effective horse power for a ship and a trawl net were estimated in the application of the propulsive efficiency in towing net. The total effective horse power(EHPT) was average 187.6kW and the effective horse power for a 1.awl net(EHPn) was average 176.7kW at a smooth sea state in towing net. The ratio of EHPn to EHPT was about 94.0% and the value was higher slightly than was already informed at a smooth sea state. The power for keeping up a townet speed was required more about 20% of a maximum continuous power at a rather rough sea state than a smooth sea state. In the future, if the residual resistance is considered with a sea state, EHPn will be estimated more correctly Also the data of EHP estimated by this method will be used as the basic data to design a trawl net.
4,000원