The name of the University. While there is a close relationship between the environment and peace, this should be reflected in the establishment of an institute or program rather that in the name of the University which should be, as originally conceived, the World Environment University. The credibility of the University will depend on the involvement in it from the beginning of highly influential leaders of the world environment movement. There is no better way of ensuring this than to obtain the formal involvement of IUCN which has in its membership most of the leading nongovernmental and governmental organizations of the environment and conservation movement

One of the most precise methods of tracking water movement and measuring moisture content during hydration process is the usage of magnetic resonance imaging (MRI). In this study, the target samples were dried “Robusta” green coffee beans, and a series of images was acquired through an MRI system during the entire hydration process. Coffee beans were immersed in a glass bottle and were placed in a 35 mm diameter RF coil throughout the whole experiment. A set of 64 images with a field of view of 26 mm×26 mm was acquired. The hydration process of intact dried green coffee beans lasted for 360 min and image data sets were acquired every 10 min with an optimal GRE pulse sequence developed. The MR images were analyzed in 2D and 3D imaging spaces. The results of 2D analysis showed that the changes in water penetration depth inside coffee beans during the hydration process could be visualized. In addition, the results of 3D analysis presented a clearer understanding of the hydration process of dried coffee beans. This study showed that changes in water distribution and physical dimensions of coffee beans during the hydration process in 2D and 3D imaging spaces were meserable, without disturbing the process, by means of the MRI technique.

The goal of this study was to evaluate effects of various microbial and organic additives on chemical compositions, fermentation indices, and aerobic stability of barley silage. Youngyang barley harvested at 31.5% dry matter (DM), and ensiled into 20 L bucket silo for 0, 1, 3, 7, 48, and 100 d in quadruplicates with four additives following: sterile destilled water at 1% of fresh forage (CON); Lactobacillus plantarum at 1.2 x 105 cfu/g of fresh forage (CL); Lactobacillus buchneri at rate of 1.2 x 105 cfu/g fresh forage (LB); Fermented Persimmon Extract at 1% of fresh forage (FPE); and Essential Oil at 1% of fresh forage (EO). On 100 d of ensiling, CL and FPE silages had lower (p<0.05) DM than CON silage. Additionally, FPE silage had higher (p<0.05) crude protein than CON silage. All silages with additives, except EO, had higher (p<0.05) neutral detergent fiber (NDF) than CON silage. Silage treated with CL, LB, and FPE had lower in vitro DM digestibility than CON silage, and silages treated with LB and FPE had higher in vitro NDF digestibility (IVNDFD) on 100 d of ensiling. The PFE silage produced the highest (p<0.05) lactate during ensiling period, while LB silage produced the highest (p<0.05) acetate. All inoculated silages had higher (p<0.05) LAB count than control silage. Only CL silage had higher (p<0.05) yeast count than control silage, while the other silages were not differ compared to CON silage. The aerobic stability was higher (p<0.05) in LB and FPE silages than in CON silage. In conclusion, FPE could be an alternative additive to increase IVNDFD, fermentation indices, and aerobic stability of barley silage.

In this work, the electrical explosion of wire in liquid and subsequent spark plasma sintering (SPS) was introduced for the fabrication of Ni-graphite nanocomposites. The fabricated composite exhibited good enhancements in mechanical properties, such as yield strength and hardness, but reduced the ductility in comparison with that of nickel. The as-synthesized Ni-graphite (5 vol.% graphite) nanocomposite exhibited a compressive yield strength of 275 MPa (about 1.6 times of SPS-processed monolithic nickel ~170 MPa) and elongation to failure ~22%. The hardness of Nigraphite composite had a value of 135.46 HV, which is about 1.3 times higher than that of pure SPS-processed Ni (105.675 HV). In terms of processing, this work demonstrated that this processing route is a novel, simple, and low-cost method for the synthesis of nickel-graphite composites.

In this study, we investigated the effects of precipitates and oxide dispersoids on the high-temperature mechanical properties of oxide dispersion-strengthened (ODS) Ni-based super alloys. Two ODS Ni-based super alloy rods with different chemical compositions were fabricated by high-energy milling and hot extrusion process at 1150℃ to investigate the effects of precipitates on high-temperature mechanical properties. Further, the MA6000N alloy is an improvement over the commercial MA6000 alloy, and the KS6000 alloy has the same chemical composition as the MA6000 alloy. The phase and microstructure of Ni-based super alloys were investigated by X-ray diffraction and scanning electron microscopy. It was found that MC carbide precipitates and oxide dispersoids in the ODS Ni-based super alloys developed in this study may effectively improve high-temperature hardness and creep resistance.

In this research, a new medium-entropy alloy with an equiatomic composition of FeCuNi was designed using a phase diagram (CALPHAD) technique. The FeCuNi MEA was produced from pure iron, copper, and nickel powders through mechanical alloying. The alloy powders were consolidated via a high-pressure torsion process to obtain a rigid bulk specimen. Subsequently, annealing treatment at different conditions was conducted on the four turn HPT-processed specimen. The microstructural analysis indicates that an ultrafine-grained microstructure is achieved after post-HPT annealing, and microstructural evolutions at various stages of processing were consistent with the thermodynamic calculations. The results indicate that the post-HPT-annealed microstructure consists of a dual-phase structure with two FCC phases: one rich in Cu and the other rich in Fe and Ni. The kernel average misorientation value decreases with the increase in the annealing time and temperature, indicating the recovery of HPT-induced dislocations.

The root of Paeonia lactiflora has been used in Chinese medicine. We conducted to check the comparative qualities of ethanol solvent extraction (PLE) and supercritical carbon dioxide extraction (PLS) of P. lactiflora root. PLE had higher antioxidant and polyphenol contents than PLS. But, PLS were significantly increased peroxisome proliferator-activated receptor (PPAR)-α. In addition, PLS inhibited the adipocyte differentiation of 3T3-L1 cells. When treated with the extract at a concentration of 100 μg/mL, the Wnt/β-catenin pathway reporter luciferase activity of HEK 293-TOP cells increased approximately by 3-folds compared to that of the untreated control group. These results indicate that P. lactiflora supercritical carbon dioxide extract may serve as a cosmeceutical for improving skin barrier function and the treatment of obesity.

In this study, we prepared ACFs with a high specific surface area from various precursors (rayon, pitch, and oxidized polyacrylonitrile-based fibers) by a steam-activation technique and investigated the effects of the micropore and mesopore fraction on 2-CEES adsorption behaviors. The activation time was precisely controlled so that the activation yield was in the range of 35–40% to ensure the mechanical properties of the ACFs. The N2 adsorption isotherm characteristics at 77K were confirmed by Brunauer–Emmett–Teller, Barrett–Joyner–Halenda and non-local density functional theory equations. The adsorption capacities of the ACF were measured by breakthrough experiments in the gas phase (750 μg/mL of 2-CEES in N2 flow). The removal efficiency of the ACFs was evaluated and compared with that of AC. From the results, specific surface areas and total pore volume of the ACF were determined to be 1380–1670 m2/g and 0.61–0.82 cm3/g, respectively. It was also observed that various pore characteristics of ACF were found to be dependent on crystallite structure of each precursor. The break through time (C/C0 = 0.10) was in the order of Oxi-Pan-H-9-2 < Saratoga AC < Rayon-H-9-3 < Pitch-H-9-4. This indicates that 2-CEES adsorption capacity could be a function not only of specific surface area or total pore volume, but also of sub-mesopore volume fraction in the range of 1.5–2.5 nm of adsorbents.

This study presents an efficient clothes-sizing system for those experiencing obesity in old age with the aim of revitalizing the clothing industry for older obese people. The study targets 249 obese men aged 60 to 85 who satisfy a Rohrer index score of 1.6 or higher and a BMI (body mass index) of 25 or higher. Elderly obese males showed more obesity in the body based on the waist. In particular, those in their 60s were the most obese, and after reaching their 70s, characteristics of old age in which the stature was reduced and the limbs were tapered were shown. The clothes-sizing system was set to 5cm in stature, 5cm and 3cm in chest girth, 2cm in waist girth (omphalion), and 2cm in hip girth according to the KS standards. Through the two-way distribution of each section, the name of the section with a high distribution was given. Casual tops were selected from eight sizes, ranging from 155 to 170cm in stature and 95 to 105cm in chest girth. Suit top sizes were selected from eight sizes, ranging from 160 to 170cm in stature and 94 to 103cm in chest girth. Bottoms suggested 10 sizes distributed between 90 and 100cm in waist girth (omphalion) and 92 and 98cm in hip girth. According to the KS standards, the detailed size was divided into the basic part and the reference part.

A new discrete bis-dithiolene complex, [ PPh4]2[Zn(DMED)2] (1; DMED = 1,2-dicarbomethoxy-1,2-dithiolate) with sulfurbased radical character was synthesized and structurally characterized. Complex 1 is stable and exhibits a square planar geometry around the zinc metal. 1 forms nanospheres through a one-pot water-induced self-assembly in a mixture of solvents (acetonitrile–water). These nanospheres were further decorated with water-soluble carbon nanotubes (wsCNTs) through hydrogen bonding between the peripheral –COOCH3 groups of 1 and surfacial carboxyl groups of wsCNTs to assemble into a spherical nanocomposite. The as-prepared nanocomposite showed fluorescence emissions in visible region due to the separation of energy states of the nanospheres assisted by wsCNTs, suggesting the future possibilities of these new materials for use in biomedical application.

목적 : 각막굴절교정수술 후 저평가되는 안압을 다양한 각막 절삭량에 따라 경도, 중등도, 고도 근시 군을 나누어 조사하고, 각 군별로 가장 적합한 수술 후의 안압 보정방법을 제시하고자 하였다. 방법 : 각막굴절교정수술을 받은 평균 연령 26.89±5.18세의 남녀 501명 1,002안(남자 237명, 여자 264명)을 대상으로 하였다. 안압은 비접촉식 안압계를 이용하여 측정하였고, 수술 후 저평가된 안압을 보정하기 위해 Ehlers, Shah, Dresden, Orssengo/Pye의 보정방법을 이용하였다. 다양한 각막 절삭량에서의 안압 차이를 비교하기 위해 세 그룹으로 나누어 분석하였다. 결과 : 비접촉식 안압계로 측정한 수술 전 안압은 15.67±2.39 mmHg이었고, 수술 후 안압은 10.12±2.11 mmHg로 평균 5.55±2.09 mmHg 만큼 유의하게 낮게 측정되었다. Ehlers의 보정방법으로 산출된 수술 후의 안압은 14.53±2.47 mmHg로 수술 전 안압과 평균 1.14±2.83 mmHg 차이를 보여 네 가지 보정방법 중에서 수술 전 안압 측정치와 가장 비슷한 수치를 보였다. 또한 각막 절삭량에 따라 나눈 경도, 중등도, 고도근시 각 군 모두에서 Ehlers 식으로 보정된 안압이 수술 전 안압과 차이가 가장 적게 나타났다. 결론 : 굴절교정수술 후 고도근시를 포함한 다양한 근시군 모두에서 4가지 보정방법 중 Ehlers 보정법이 가장 유용한 것으로 판단된다. 이 결과는 각막굴절교정수술 후 저평가되는 안압의 실제 값을 산출하여 녹내장에 대한 조기진단 및 치료시기가 늦어지는 것을 막는 데에 활용할 수 있을 것이라 생각된다.

목적 : 청광 차단렌즈의 효과를 정량적으로 분석하는 방법을 새롭게 제시하고, 이를 시판하고 있는 기능성 렌즈에 적용하여 비교 분석함으로써 그 활용 가능성을 확인하고자 하였다. 방법 : 렌즈의 광투과율을 측정하고, 청광 차단 효율 함수를 적용하여 효율에 대한 정성적인 분석을 하였다. 또한 청광 차단 효율 결과를 적분하여 수치화하는 정량적인 분석 방법을 새롭게 도입하여, 시판중인 청색광차단 기능성 렌즈에 적용하여 비교분석하였다. 결과 : 정성적인 분석 방법을 일반렌즈, 코팅방법으로 제작된 2종의 렌즈와 착색방법으로 제작된 1종의 렌즈에 적용한 결과, 모든 렌즈는 단파장 영역의 빛을 차단하는 효과가 우수한 것으로 분석되었다. 하지만 정량적인 분석 방법에 의한 결과에서는 각 렌즈별 다소 차이가 있음을 확인하였다. 결론 : 다양해지는 디스플레이 장치 및 스마트폰의 광 특성이 날로 진화되고 변화되고 있으므로, 다양한 방법으로 광원과 광학제품에 대한 광특성 분석이 요구된다. 이에 따라, 본 연구에서 새롭게 도입한 정량적인 분석 방법이 효과적인 수단일 될 수 있는 가능성을 확인 하였다.

일본에서는 2000년 고준위방사성폐기물의 심층처분을 위한「특정방사성폐기물의 최종 처분에 관한 법률」을 제정하고 부지선정을 착수하였으나, 부지선정 절차에 참여를 원하는 지자체가 존재하지 않았다. 따라서, 일본 정부는 2015년 문헌조사 단계에 새로운 부지선정을 절차를 개발하고, 지자체의 공모를 촉진하고자 2017년 6월 28일 심층처분을 위한 전국규모 과학적 특성 지도를 발간하였다. 이 지도는 심층처분장 초기 혹은 개념단계에 고려되는 요건 및 기준 등을 제공하고 심층처분을 위한 적합성을 분석함으로써, 공공의 이해도 증진과 지자체와의 의견교환 등을 위해서 유용하게 활용되고 있다.

After the permanent shutdown of K1 in 2017, decommissioning processes have attracted great attention. According to the current decommissioning roadmap, the dismantling of the activated components of K1 may start in 2026, following the removal of its spent fuel. Since the reactor vessel (RV) and reactor vessel internal (RVI) of K1 contain massive components and are relatively highly activated, their decommissioning process should be conducted carefully in terms of radiological and industrial safety. For achieving maximum efficiency of nuclear waste management processes for K1, we present activation analysis of the segmentation process and waste classification of the RV and RVI components of K1. For RVI, the active fuel regions and some parts of the upper and lower active regions are classified as intermediate-level waste (ILW), while other components are classified as low-level waste (LLW). Due to the RVI’s complex structure and high activation, we suggest various underwater segmentation techniques which are expected to reduce radiation exposure and generate approximately nine ILW and nineteen very low level waste (VLLW)/LLW packages. For RV, the active fuel region and other components are classified as LLW, VLLW, and clearance waste (CW). In this case, we suggest in-situ remote segmentation in air, which is expected to generate approximately forty-two VLLW/LLW packages.

APR 1400 액체방사성폐기물관리계통 효율성 증가와 계통의 성능 개선을 위한 방안으로 핵종 이온 광물화 처리기술을 적용 하는 것을 고려하였다. 핵종 이온 광물화 처리기술은 현재까지 발전소에 실제적으로 적용되진 않았지만 원자력발전소의 액 체방사성폐기물에 존재하는 다양한 핵종 이온을 최소 95% 이상 선택적으로 제거 가능 하다는 것을 실험적으로 증명한 바 있다. 본 논문은 핵종 이온 광물화 처리기술의 제염율을 반영하여 기존 설계에 적용 가능성을 확인하였으며, 기존 설계를 개선할 수 있는 방안을 마련하였다. 핵종 이온 광물화 처리기술의 제염 특성과 기존의 액체방사성폐기물관리계통 설계 및 운전 경험을 고려하여 최적의 적용 위치를 결정하였다. 원자력발전 운영에 따라 발생하는 액체방사성물질이 수집되는 수집탱크에 핵종 이온 광물화 처리기술을 적용하는 것이 기존 설계의 영향이 가장 적을 것이며, 개선 효과도 가장 큰 것으로 해석되었다. 핵종 이온 광물화 처리기술이 현재의 APR 1400 발전소 또는 신규 원전에 적용될 경우 액체방사성폐기물관리계통의 운전 효율성 증가와 계통의 성능 개선이 기대된다.

The Agrobacterium tumefaciens mediated gene transfer is widely used to generate genetic transformation of plants and transient assay of temporal exogenous gene expression. Syringe infiltration system into tobacco (Nicotiana benthamiana) leaves is a powerful tool for transient expression of target protein to study protein localization, protein-protein binding and protein production. However, the protocol and technical information of transient gene expression, especially double strand RNA (dsRNA), in tobacco using Agrobacterium is not well known. Recently, dsRNA is crucial for insecticidal effect on destructive agronomic pest such as Corn rootworm. In this study, we investigated the factor influencing the dsRNA expression efficiency of syringe agro-infiltration in tobacco. To search the best combination for dsRNA transient expression in tobacco, applied two Agrobacterium cell lines and three plant vector systems. The efficiency of dsRNA expression has estimated by real-time PCR and digital PCR. As a result, pHellsgate12 vector constructs showed the most effective accumulation of dsRNA in the cell. These results indicated that the efficiency of dsRNA expression was depending on the kind of vector rather than Agrobacterium cells. In summary, the optimized combination of transient dsRNA expression system in tobacco might be useful to in vivo dsRNA expression for functional study and risk assessment of dsRNA.