본 연구에서는 학교 건축물에 발생할 수 있는 화재 상황을 시뮬레이션 하는 기법에 대해 알아보기로 한다. 이에, 기존의 국내외 연구를 통해 화재 상황을 시뮬레이션 하는데 있어 고려해야 할 기본적인 요소를 파악하고 다양한 화재의 원인과 발화량에 따라 나타는 화재양상을 살펴봄으로써 적절한 화재 시뮬레이션 기법을 도출하도록 한다. 화재를 시뮬레이션 하는 방법으로는 CFD (Computational Fluid Dynamics)를 기반으로 하는 공용 소프트웨어인 FDS(Fire Dynamic Simulator)를 이용하였으며, 시뮬레이션의 결과로 시간과 장소에 따라 나타나는 온도정보 및 화염의 전파 양상을 시각화하여 비교분석하였다. 본 연구에서 도출된 화재 시뮬레이션 기법을 이용하여 화재시 피난 대책, 대응인력의 투입 방법을 수립하는데 반영할 수 있으며, 화재 시뮬레이션 결과로부터 얻은 온도 정보를 이용하여 건축 구조부재의 안전성을 평가하는 데에도 활용할 수 있다.

FDS(Fire Dynamics Simulation)은 미국의 NIST가 연소 및 건축불의 화재를 수치해석적으로 해석하기 위해 1980년대부터 개발을 시작해 현재까지 version 6 까지 발표하면서 성능과 기능을 개선해 오고 있는 공개용 코드이다. 하지만 version 5 까지 FDS 코드가 사용한 LES난류모델은 가장 고전적인 형태의 LES모델을 사용하였기 때문에 대형 건축물의 화재해석에 많은 오차가 발생하고 있음이 꾸준히 지적되어왔다. 이로 인해 최근에 발표된 version 6에는 기존의 LES모델을 포함하여 3개의 LES모델이 추가되어 정량적 신뢰성을 강화한 것으로 평가되고 있다. 본 연구에서는 FDS에서 제공하고 있는 4개의 LES 난류모델에 대하여 평판유동 및 평판위의 입방체 주위의 압력분포를 분석하고 비교하여 각 난류모델의 특성과 신뢰성을 검증하고자 하였다.

태풍, 지진 등 external excitation에 의해 발생하는 Structural response를 실제와 가깝게 예측하기 위해서는 실제와 가장 유사한 구조해석모델을 작성하여 정확한 구조동특성을 산정하는 것이 중요하다.초고층 및 대공간에 대해서는 FE 모델 개선에 대한 기존 연구결과가 있으나 조적건물, 특히 성당건축물에 대해서는 현장계측과 FE 모델 개선에 대한 시도가 이루어지지 않았다. 본 논문에서는 성당건물을 대상으로 장기모니터링을 실시하고 이를 이용하여 대상 건물의 동특성을 분석하였다. 그리고, 태풍시 계측된 풍응답과 해석결과를 비교하여 풍응답해석의 신뢰성을 평가하였다.

아직 우리나라에는 대공간에 대한 정의는 없으나 일반적으로 30미터 이상 장 스팬을 갖고 있거나 바닥면적이 넓어 화재발생시 길찾기가 어려운 건축물이라 할 수 있다. 본 연구에서는 이러한 대공간 건축물의 피난안전성 확보를 위한 기초연구로서 국내외 대공간 건축물의 화재 사건 분석을 통하여 재실자의 피난특성을 파악하고자 한다.

21세기에 들어 크고 작은 재난의 증가가 지속되고 있으며 농어촌 위주의 피해 지역에서 인구가 밀접되어 있는 도시 지역으로 재난 피해의 위험성이 확대되고 있으며 그 피해 또한 심각한 경우가 많이 발생하고 있다. 그러나 도시의 재난에 대한 평가는 풍수해에 대비한 홍수지도 작성정도에 머무르고 있으며 사회적 재난 및 인적재난 등 자연재난 이외의 발생요소를 감안할 필요가 증대하고 있다. 따라서 본 연구에서는 자연재난과 인적재난, 사회적 재난을 포함하는 재난의 전반적인 영향을 분석하여 개별 건축물 대상으로 재난의 대응성 및 안전성을 평가하고 이에 대한 대비책을 마련하는데 목적이 있다. 연구의 방법으로는 건축물의 계획을 면밀히 분석하고 각 공간에서 일어나는 행위와 작업의 종류를 파악하고 발생 가능한 위험요소를 복합적으로 평가한다. 평가결과를 반영하여 각 평가항목의 만족도를 측정하고 이에 대한 개선사항을 제시한다. 이를 통해 건축물의 관리자는 물론 사용자의 안전을 향상시키는데 기여할 수 있을 것으로 보이며 향후 유사한 사례를 통하여 건축물 재난 및 안전성 평가의 프로토타입으로 사용될 수 있을 것으로 보인다.

This study was performed to evaluate the asbestos exposure levels and to calculate excess lifetime cancer risk (ELCR) for the risk assessment of the asbestos fibers released from asbestos-cement slate roofing (ASR) building. Total number of ASR buildings was into 21,267 in Busan, and 82.03 percent of the buildings was residential houses, and 43.61 percent of the buildings was constructed in 1970s. For this study, ten buildings were selected randomly among the ASR buildings. The range of airborne asbestos concentration in the selected ten ASR buildings was from 0.0016 to 0.0067 f/mL, and the concentration around no-admitted ASR buildings was higher than that around admitted buildings. The ELCR based on US EPA IRIS (integrated risk information system) model is within 3.5E-05 ~ 1.5E-04 levels, and the ELCR of no-admitted ASR buildings was higher than 1.0E-04 (one person per million) level that is considered a more aggressive approach to mitigate risk. These results indicate that the cancer risk from ASR buildings is higher than other buildings, and systematic public management is required for control of no-admitted ASR buildings within near future.

As facilities performing the production, processing, preservation, and shipment of agricultural products; agricultural facilities are categorized into planting facilities and livestock facilities based on the management target. Agricultural facilities are set in farmlands, and facility users mainly complain about the legal or institutional restrictions on farm rather than their own facilities itself. From 2009 to 2012, the Ministry of Agriculture Food and Rural Affairs (MAFRA) published the "Casebook of farmer Complaints on Farmlands" in order to help answer farmers' questions and support public workers' workloads. However, contents related to agricultural facility installed in farmland are currently not dealt with in particular. Among agricultural facilities, demands of property rights with livestock facilities have risen due to construction permissions, operational restrictions, and high initial investment costs; and relevant laws were revised and are now being executed. However, for planting facilities such as mushroom facilities, ginseng facilities, and greenhouses; farmer complaints related to property rights are constantly increasing because revisions to relevant laws are not being made despite the rising diversity of construction materials through technical developments as well as the rising scale of assets-i.e. mechanization, automation, and the application of New Regeneration Energies according to capital influx. In this study, the current state of relevant agricultural facility legislation were organized and their drawbacks deduced in order to propose improvements of Agricultural Facility Legislation. The result of interviewing with public workers and farmers show that agricultural facilities should be regarded as extensions of farmlands rather than as facilities built in land where development actions were being taken. Alternatives able to reflect these opinions were suggested through expert consultation.

This study proposed immediate estimation method for structural integrity using acceleration responses after earthquake. Generally, structural damage detection searching for changes in the natural frequencies by acceleration data. However structure’s natural frequency is changed without damage because of various environmental factors. So that reason, we suggested structural safety estimation procedure using various indicators from analyzing acceleration data. This method is not exactly evaluated structural damage, but using this method is simple to make a decision.

In this study, after performing a full-scale dynamic testing of unreinforced masonry buildings, the experimental results and developed seismic performance evaluation program of existing unreinforced masonry buildings were verified by comparing the results of the program.

One of the most important processes to accurately predict structural responses is to evaluate accurate structural dynamic properties using finite element (FE) models. The analyzed structural dynamic properties usually show considerable discrepancies with the measured ones because structural details are commonly simplified in the FE models. To identify such discrepancies, FE models of them have been calibrated using the measured dynamic properties in previous researches. In this study, dynamic properties were measured for a historic cathedral and the FE model of it was calibrated using the measured results as a reference. Finally, a procedure of the FE model construction for masonry cathedral were tentatively proposed.

산업부산물인 폐유황의 재황용을 목적으로 개질처리된 유황을 대상으로 콘크리트용 혼화재료로써의 물성검토를 위하여 개질처리된 유황을 콘크리트에 외할 첨가하여 개질유황 첨가별 압축강도 및 내구성능을 평가한 결과를 고찰하였다.

Woods are used as a main material for the domestic Traditional Buildings and most Traditional Wood Structures should be conserved as Traditional Assets. To be conserved, structural performance should be evaluated. So traits of the materials are to be studied. Therefore characteristics of structural deterioration of Traditional Wood Structures are to be analysed on this study.

Safety management means that protect the life and property from natural disaster such as earthquake and abnormal climate etc. And also it is very important as the building structures are higher and more large scale structures. In this paper, various kind of technologies including fiber optic sensor application, image processing for detect the crack width are simply proposed. And also, the schematic system which can be applicable to the safety management of building and large scale structure are suggested. Related research project have performed by KICT since 2011, and this year is 2nd project period. As time goes on, the developing state of the arts will be presented in the future.

The study was conducted for the purpose of determining the size of the floor area of super-tall building by use. So, considering the urban capacity in the region around the super-tall buildings, it has been developed for the prediction methodology of the size. Through the information of the buildings and the cadastral, the correlation and regression analysis were performed by 18 super-tall buildings located in Korea As a result, the residential floor capacity was under the influence of land use of residential and green space, and the business floor capacity was under the influence of land use of green space. Hotel and commercial area, where as the land use and has shown significant results that do not. of a building the size of the surrounding areas for residential and green space and commercial floor area size of the impact of land use for was larger. Hotel and commercial floor capacity, where as the land use and has shown significant results that do not. After this study, it is need to the consideration of the urban capacity around region and supertall buildings to enhance the role of public of supertall buildings. And it will be need to improve the accuracy of prediction with applications to the information of buildings around the region of supertall buildings.

According to climate change, deficiency of usable land, large water portion of the Earth surface, and improvement of income level, floating architecture is emerging as a strong & attractive alternative. The aim of this study is to suggest some related applying ways for new building projects around waterside. New paradigm of architecture can be described as a new model and/or system of architecture with new concept and Zeitgeist like sustainability and green building. Floating building is already a new paradigm of architecture comparing with the preconception of building only on the land and current building regulations. New paradigm features from the sample projects can be summarized as new concepts of building, application of various renewable energy resources(water, solar, wind), modular construction, use of local raw material, dual purpose usage, long term and relocatable usage, and special building materials for green building.

본 논문은 1990년대~2011년 시공 중이었던 건축물의 커튼월의 단열성을 평가하기 위하여 내외 표면 온도를 측정하여 부위별 온도 차이를 분석하였다. 유리면이나 단열층이 있는 표면보다 커튼월의 프레임 (멀리온 및 트랜섬)의 온도는 동절기 외부 평면의 경우 6℃~10℃ 정도 높게 나타났다. 또한, 같은 프레임에서도 앵커유닛이 있는 부위가 다른 프레임보다 2℃~3℃ 더 높게 나타나 보다 큰 열 손실이 일어나고 있는 것으로 나타났다.