The purpose of the present study was to investigate the effects of familiar exercise and novel exercise on motor function after intracerebral hemorrhage (ICH) in rats. The rats were subjected to a unilateral striatal ICH via collagenase infusion. The rats were randomly divided into the following three groups: the CON (control group; rested one week post-ICH), the FE (familiar exercise group; familiar exercise was performed two weeks after one-week post-ICH period), and NE (novel exercise group; novel exercise was performed two weeks after one-week post-ICH period). We measured neurological behavior using a ladder rung walking test and a beam walking test; we measured the level of nerve growth factor (NGF) using immunohistochemistry and western blot analysis. We performed a one-way ANOVA test to analyze the scores obtained from the neurological behavior tests and the differences of NGF protein levels among the three groups. In the present study, the FE group and the NE group showed significant improvement during the neurological behavior tests and in their expression of NGF protein level, as compared to the CON group. Especially, NE group more increase than FE group in neurological behavior tests, the expression of NGF on motor cortex. In conclusion, these results suggest that, after ICH, familiar exercise and novel exercise enhance motor function and, novel exercise is more effective than familiar exercise.

In daily activities, people often perform two or more tasks simultaneously. This is referred to as dual-tasking or multi-tasking. The purpose of this study was to examine the effects of performing dual tasks while using a mobile phone on static and dynamic postural stability. Twenty-four subjects were asked to stand on a force plate and then instructed to perform a balance task only (BT), a balance task while listening to music (BTL), a balance task while talking on the mobile phone (BTT), and a balance task while sending text messages (BTS). We used the BioRescue to measure postural sway and limit of stability for static and dynamic postural stability. Also the star excursion balance test (SEBT) was used to measure dynamic postural stability. A one-way ANOVA with repeated measures was used to compare the effects of the BT, BTL, BTT, and BTS. The Bonferroni's post hoc test was used to determine the differences among four tasks. Carrying out the BTS significantly decreased the limit of stability compared with carrying out the BT, BTL, and BTT (p<.05). In limit of stability, total surface area of BTT was more significantly decreased than that of BT and total surface area of BTS was more decreased than that of BT, BTL and BTT (p<.05). In the SEBT, the BTS displayed significantly smaller reach distance values compared with the BT or BTL (p<.05). These findings suggest that performing the balance task while sending text message on the mobile phone decreases dynamic postural stability, whereas performing the same task while listening to music using the mobile phone does not. Therefore, it requires more attention to maintain dynamic balance while sending text messages.

This study aimed to determine the usefulness of classifying patients with neck pain on the basis of the results of passive scapular elevation test. We classified 21 patients with neck pain into positive (n=12) and negative (n=9) groups on the basis of passive scapular elevation test; the 2 groups then equally performed scapular stabilization exercise program for 30 min, 3 times a week, for 4 weeks. Visual analogue scale (VAS), neck disability index (NDI), and range of motion (ROM) were recorded both before and after the intervention for both groups. Paired t-test was used to determine that there were significant changes between before and after the intervention, and independent t-test was used for analyzing changes between two groups of dependent variables. After 4 weeks of training, we observed significant decrease in pain and disability (p<.05) and a significant increase in rotation, flexion, extension, and side-bending ROM (p<.05) in both groups. Further, between pre- and post-intervention evaluations, we observed a significant decrease in pain and disability and a significant increase in rotation and flexion ROM in the positive group than in the negative group (p<.05). These results indicate that passive scapular elevation test may be used to identify mechanical disorders of the cervicoscapular muscle in patients with neck pain. Therefore, we recommend the use of passive scapular elevation test to determine appropriate treatment intervention when treating patients with neck pain.

The purpose of this study was to investigate the effect of visual feedback on the postural control of stroke patients, by systematically varying conditions of visual feedback [eye-open condition (EO) vs. eye-closed condition (EC)], and base-support (both-side support, affected-side support, and unaffected-side support). In this study, we allocated 41 stroke patients with no damage in the cerebellum and visual cortex who can walk at least 10 meters independently, and 35 normal adults who have no experience of stroke to the control group. Both groups were asked to perform a "sit-to-stand" task three to five times, and their postural control ability was measured and compared in terms of asymmetric dependence (AD) instead of the traditional symmetric index (SI) in the literature. The results showed that although both subject groups maintained better postural control in the EO condition than in the EC condition, the patient group appeared to be more stable in EC than in EO when they were required to perform the task of the support condition given on the affected side. These results implied that visual feedback can impair stroke patients' postural control when it is combined with a specific support condition.

The lower trapezius muscle is an important stabilizer and primary mover of the scapula. The potential use of ultrasound imaging to evaluate scapular muscle function warrants investigation. The purpose of this study is to use ultrasound imaging for determining the effectiveness of 4 different isometric exercises for maximally activating the lower trapezius muscles in healthy subjects. Twenty-eight (14 men and 14 women) volunteers were recruited for this study. Thickness measurements of the lower trapezius muscles were recorded during 4 exercises: latissimus pulldown (LP), prone V-raise (PV), prone row (PR), and modified prone cobra (MP). Lower trapezius muscle thickness was measured 3 times by 2 investigators at a point 3 cm lateral to the lateral edge of the T8 spinous process. The order of 4 exercise execution was randomized for each participant. To identify statistical significance, one-way ANOVA with repeated measures was used with the significance level of .05. Intraclass correlation coefficient (ICC) for intra-reliability was .86~.98 and inter-rater reliability .83~.96 for the lower trapezius, respectively (p<.01). Thickness changes in the lower trapezius muscles between the relaxed and contracted states in men were as follows: LP (, 182%), MP (, 167%), PV (, 149%), and PR (, 133%). In women the values were as follows: LP (, 163%), MP (, 131%), PV (, 129%), and PR ( mm, 100%). Thickness of the lower trapezius muscles significantly differed between exercises in both the gender (p<.01). The LP was the most effective exercise for increasing the activation of the lower trapezius muscle in both the gender. We recommend performing the LP exercise for strengthening the lower trapezius muscles.

The purpose of this study was to determine the effect of ankle joint mobilization with movement (MWM) on the range of motion (ROM) in the ankle, on the muscle strength of lower extremities, and on spatiotemporal gait parameters in chronic hemiplegic patients. Fifteen subjects with chronic stroke were divided into two groups: an experimental group (8 subjects) and a control group (7 subjects). Both groups attended two or three sessions of physical therapy each week. The experimental group also attended additional MWM training sessions three times a week for five weeks. For both groups, the ROM of the ankle, the muscle strength of the lower extremities, and the spatiotemporal gait parameters in paretic limbs were evaluated before and after the training period. The results showed that the experimental group experienced more significant increases than did the control group in terms of passive (6.10%) and active (21.96%) ROM of the ankle, gait velocity (12.96%), and peak torque, of the knee flexor (81.39%), the knee extensor (24.88%), and the ankle plantar flexor (41.75%)(p<.05). These results suggest that MWM training in patients with chronic stroke may be beneficial in increasing ROM in the ankle, muscle strength in the lower extremities, and gait speed.

This study aimed to investigate whether isometric lower limb exercise can activate contralateral trunk muscles and whether the magnitude of muscle activation is related to lower limb movement in sitting. This study included 25 healthy young subjects (20 males and 5 females). The magnitude of trunk muscle activation was measured using surface electromyography (EMG) during hip flexion, extension, adduction, and abduction, and a significant difference was observed in the activation levels of trunk muscles among the tests (p<.01). The EMG activity of the multifidus (MF) and erector spinae (ES) muscles on the contralateral side were significantly greater during hip extension. However, the activation levels of the contralateral internal oblique (IO) and rectus abdominis (RA) muscles were greatest during hip flexion. The MF : ES EMG ratio was significantly greater during hip isometric during hip isometric flexion and abduction compared to hip extension and adduction. There was no significantly difference in the IO : RA ratio during the isometric contractions toward different directions. These findings indicate that isometric lower limb exercise can elicit trunk muscle contraction on the contralateral side and may therefore be helped for developing contralateral trunk muscle strength in individuals undergoing rehabilitation.

The aim of this study is to compare measurements of abdominal muscle thickness using ultrasonography imaging (USI) to those using a special transducer head device, during five different trunk stabilization exercises, ultimately to determine which exercise led to the greatest muscle thickness. Thirty eight healthy subjects participated in this cross-sectional study. The five types of trunk stabilization - i.e., a sit-up on the supine, an upper and lower extremity raise with quadruped on the prone, a leg raise in sitting on the ball, trunk rolling on the ball, and balance using sling on the prone position - were each performed with an abdominal draw. The thickness of the abdominal muscle - including the transverse abdominal (TrA), internal oblique (IO), and external oblique (EO) - was measured by USI with a special transducer head device, at rest and then at contraction in each position. Data were analyzed using one-way repeated ANOVA with the level of significance set at =.05. The results were as follows: 1) the TrA thickness was statistically significant (p<.05), whereas the IO and EO thicknesses were not (p>.05); 2) among the five types of trunk stabilization, TrA thickness significantly increased with the balance using a sling in the prone position, (p<.05), whereas no significant difference was noted for the four types of trunk stabilization (p>.05); 3) reliability data showed that there was a high degree of consistency among the measurements taken using the special transducer head device (ICC=.92). In conclusion, the balance using a sling in the prone position was more effective than any of the four other types of trunk stabilization in increasing TrA thickness in healthy subjects.

To compare the photocatalytic performances of titania for purification of waste water according to applied voltages and doping, TiO2 films were prepared in a 1.0 M H2SO4 solution containing NH4F at different anodic voltages. Chemical bonding states of F-N-codoped TiO2 were analyzed using surface X-ray photoelectron spectroscopy (XPS). The photocatalytic activity of the co-doped TiO2 films was analyzed by the degradation of aniline blue solution. Nanotubes were formed with thicknesses of 200-300 nm for the films anodized at 30 V, but porous morphology was generated with pores of 1-2 μm for the TiO2 anodized at 180 V. The phenomenon of spark discharge was initiated at about 98 V due to the breakdown of the oxide films in both solutions. XPS analysis revealed the spectra of F1s at 684.3 eV and N1s at 399.8 eV for the TiO2 anodized in the H2SO4-NH4F solution at 180 V, suggesting the incorporation of F and N species during anodization. Dye removal rates for the pure TiO2 anodized at 30 V and 180 V were found to be 14.0% and 38.9%, respectively, in the photocatalytic degradation test of the aniline blue solution for 200 min irradiation; the rates for the F-N-codoped TiO2 anodized at 30 V and 180 V were found to be 21.2% and 65.6%, respectively. From the results of diffuse reflectance absorption spectroscopy (DRS), it was found that the absorption edge of the F-N-codoped TiO2 films shifted toward the visible light region up to 412 nm, indicating that the photocatalytic activity of TiO2 is improved by appropriate doping of F and N by the addition of NH4F.

A chemical process involves polymerization within microspheres, whereas a physical process involves the dispersion of polymer in a nonsolvent. Nano-sized monodisperse microspheres are usually prepared by chemical processes such as water-based emulsions, seed suspension polymerization, nonaqueous dispersion polymerization, and precipitation polymerizations. Polymerization was performed in a four-necked, separate-type flask equipped with a stirrer, a condenser, a nitrogen inlet, and a rubber stopper for adding the initiator with a syringe. Nitrogen was bubbled through the mixture of reagents for 1 hr. before elevating the temperature. Functional silane (3-mercaptopropyl)trimethoxysilane (MPTMS) was used for the modification of silica nanoparticles and the self-assembled monolayers obtained were characterized by X-ray photoelectron spectroscopy (XPS), laser scattering system (LSS), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), elemental analysis (EA), and thermogravimetric analysis (TGA). In addition, polymer microspheres were polymerized by radical polymerization of γ-mercaptopropyl modified silica nanoparticles (MPSN) and acrylamide monomer via precipitation polymerization; then, their characteristics were investigated. From the elemental analysis results, it can be concluded that the conversion rate of acrylamide monomer was 93% and that polyacrylamide grafted to MPSN nanospheres via the radical precipitation polymerization with AAm in ethanol solvent. The microspheres were successfully polymerized by the 'graft from' method.

최근 몇 년간 지속되어 온 전세가격 급등은 서민들의 주거안정에 큰 위협요인으로 작용하고 있다. 이른바 전세난 해결을 위해 주택 공급과 수급조절 측면의 대안은 근본적인 대안이 될 수 있으나 그 효과가 나타는 데에 일정 정도의 시간이 필요한 대책이다. 그러나 전세난은 이미 더 이상 방치할 수 없는 상황에 이르렀다. 따라서 서민들의 주거안정을 제고하고 전세난 및 전세 값 폭등을 방지, 완화하기 위해 주택임대차보호법을 시급히 개정하여야 한다. 개정될 주택임대차보호법의 내용은 첫째, 일정한 사유가 있는 경우를 제외하고 2년의 주택임대차기간 종료 후에도 최초 1회에 한해 임차인이 2년의 범위 내에서는 갱신청구권을 행사해 최장 4년 동안 임대차가 가능하도록 한다. 둘째, 임차료 상승률을 일정 범위 이내(5%)로 제한한다. 셋째, 이를 지키지 않을 경우 초과 지급된 차임 또는 보증금 상당금액의 반환을 청구할 수 있도록 한다. 최장 4년까지 임대차가 가능해지면 세입자들의 주거안정에 도움이 될 뿐만 아니라, 이주 수요가 분산되어 세난과 전세가격 폭등을 완화할 수 있다. 부가적으로 우리나라의 초ᆞ중ᆞ고 학제가 6년제, 3년제인 것에 비추어도 현행 주택임대차보호법상의 임대차 최장 보호기간(2년)은 비현실적이므로 개정이 필요하다.

This study involves using nickel chloride solution as a raw material to produce nano-sized nickel oxide powder with average particle size below 50 nm by the spray pyrolysis reaction. The influence of the inflow speed of raw material solution on the properties of the produced powder is examined. When the inflow speed of the raw material solution is at 2 ml/min., the average particle size of the powder is 15~25 nm and the particle size distribution is relatively uniform. When the inflow speed of the solution increases to 10 ml/min., the average particle size of the powder increases to about 25 nm and the particle size distribution becomes much more uneven. When the inflow speed of the solution increases to 20 ml/min., the average particle size of the powder increases in comparison to the case in which the inflow speed of the solution was 10 ml/min. However, the particle size distribution is very uneven, showing various particle size distributions ranging from 10 nm to 70 nm. When the inflow speed of solution increases to 50 ml/min., the average particle size of the powder decreases in comparison to the case in which the inflow speed was 20 ml/min., and the particle size distribution shows more evenness. As the inflow speed of the solution increases from 2 ml/min. to 20 ml/min., the XRD peak intensities gradually increase, while the specific surface area decreases. When the inflow speed of solution increases to 50 ml/min., the XRD peak intensities rather decrease, while the specific surface area increases.

Two types of Pt nanoparticle electrocatalysts were composited on Pt nanowires by a combination of an electrospinning method and an impregnation method with NaBH4 as a reducing agent. The structural properties and electrocatalytic activities for methanol electro-oxidation in direct methanol fuel cells were investigated by means of scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and cyclic voltammetry. In particular, SEM, HRTEM, XRD, and XPS results indicate that the metallic Pt nanoparticles with polycrystalline property are uniformly decorated on the electro-spun Pt nanowires. In order to investigate the catalytic activity of the Pt nanoparticles decorated on the electro-spun Pt nanowires, two types of 20 wt% Pt nanoparticles and 40 wt% Pt nanoparticles decorated on the electro-spun Pt nanowires were fabricated. In addition, for comparison, single Pt nanowires were fabricated via an electrospinning method without an impregnation method. As a result, the cyclic voltammetry and chronoamperometry results demonstrate that the electrode containing 40 wt% Pt nanoparticles exhibits the best catalytic activity for methanol electro-oxidation and the highest electrochemical stability among the single Pt nanowires, the 20 wt% Pt nanoparticles decorated with Pt nanowires, and the 40 wt% Pt nanoparticles decorated with Pt nanowires studied for use in direct methanol fuel cells.

Recently nanoscience and nanotechnology have been studied intensively, and many plants, insects, and animals in nature have been found to have nanostructures in their bodies. Among them, lotus leaves have a unique nanostructure and microstructure in combination and show superhydrophobicity and a self-cleaning function to wipe and clean impurities on their surfaces. Coating films with combined nanostructures and microstructures resembling those of lotus leaves may also have superhydrophobicity and self-cleaning functions; as a result, they could be used in various applications, such as in outfits, tents, building walls, or exterior surfaces of transportation vehicles like cars, ships, or airplanes. In this study, coating films were prepared by dip coating method using polypropylene polymers dissolved in a mixture of solvent, xylene and non-solvent, methylethylketon, and ethanol. Additionally, attempts were made to prepare nanostructures on top of microstructures by coating with the same coating solution with an addition of carbon nanotubes, or by applying a carbon nanotube over-coat on polymer coating films. Coating films prepared without carbon nanotubes were found to have superhydrophobicity, with a water contact angle of 152˚ and sliding angle less than 2˚. Coating films prepared with carbon nanotubes were also found to have a similar degree of superhydrophobicity, with a water contact angle of 150 degrees and a sliding angle of 3 degrees.

TiO2 thin films for high energy density capacitors were prepared by r.f. magnetron sputtering at room temperature.Flexible PET (Polyethylene terephtalate) substrate was used to maintain the structure of the commercial film capacitors. Theeffects of deposition pressure on the crystallization and electrical properties of TiO2 films were investigated. The crystal structureof TiO2 films deposited on PET substrate at room temperature was unrelated to deposition pressure and showed an amorphousstructure unlike that of films on Si substrate. The grain size and surface roughness of films decreased with increasing depositionpressure due to the difference of mean free path. X-ray photoelectron spectroscopy (XPS) analysis revealed the formation ofchemically stable TiO2 films. The dielectric constant of TiO2 films was significantly changed with deposition pressure. TiO2films deposited at low pressure showed high dissipation factor due to the surface microstructure. The dielectric constant anddissipation factor of films deposited at 70mTorr were found to be 100~120 and 0.83 at 1kHz, respectively. The temperaturedependence of the capacitance of TiO2 films showed the properties of class I ceramic capacitors. TiO2 films deposited at10~30mTorr showed dielectric breakdown at applied voltage of 7V. However, the films of 500~300nm thickness depositedat 50 and 70mTorr showed a leakage current of ~10−8~10−9 A at 100 V.

정보통신기술의 급속한 발전과 인터넷의 보급으로 전통적인 매체들이 상호융합하는 경향을 보이면서 사람들 사이의 의사소통의 태양과 구조를 새롭게 규정하는 변화의 시기이다. 이는 장차 모든 사람이 다른 모든 이들에 대해 정보의 발신자이자 수신자가 될 수 있는 가능성을 열어주는 새로운 지경의 도래를 예고하는 듯하다. 다양한 가치관과 목적을 가진 수많은 사람들이 각자의 자유를 향유하되 평화롭게 공존하는 사회가 인터넷으로 대표되는 새로운 매체를 통해 구현되는 사이버공간을 활용하여 어떻게 구현될 수 있을지는 지속적인 연구를 필요로 하는 문제이다. 인터넷을 통해 상당한 수준의 개방되고 자유로운 의사표현의 장을 확보하게 된 이용자들은 그러한 직접적이고 상호적인 교류의 수단을 활용하여 민주주의를 실질적으로 구현하기 위한 제도적 가능성에 대해서도 희망적인 기대를 갖는다. 그 긍정적 기대에 초점을 둔다면 자유로운 정치적 의사표현의 보장을 지지하게 되겠지만 새로운 매체의 활용이 가져올 부정적 효과에 경각심을 갖는다면 기존 법제를 토대로 신중한 접근을 선호하게 될 것이다. 이 글에서는 인터넷을 통해 구현되는 사이버공간에서 기대되는 표현의 자유와 민주주의의 가능성에 대한 근본적인 인식을 토대로 공직선거법 제93조 제1항에 대한 위헌확인사건(2007헌마1001)을 중심으로 하여 인터넷 선거운동의 자유와 규제에 대한 시각을 검토한다.

A sample of ultra low carbon IF steel was processed by six-layer stack accumulative roll-bonding (ARB) and annealed. The ARB was conducted at ambient temperature after deforming the as-received material to a thickness of 0.5 mm by 50% cold rolling. The ARB was performed for a six-layer stacked, i.e. a 3 mm thick sheet, up to 3 cycles (an equivalent strain of ~7.0). In each ARB cycle, the stacked sheets were, first, deformed to 1.5 mm thickness by 50% rolling and then reduced to 0.5 mm thickness, as the starting thickness, by multi-pass rolling without lubrication. The specimen after 3 cycles was then annealed for 0.5 h at various temperatures ranging from 673 to 973 K. The microstructural evolution with the annealing temperature for the 3-cycle ARB processed IF steel was investigated in detail by transmission electron microscopy observation. The ARB processed IF steel exhibited mainly a dislocation cell lamella structure with relatively high dislocation density in which the subgrains were partially observed. The selected area diffraction (SAD) patterns suggested that the misorientation between neighboring cells or subgrains was very small. The thickness of the grains increased in a gradual way up to 873 K, but above 898 K it increased drastically. As a result, the grains came to have an equiaxed morphology at 898 K, in which the width and the thickness of the grains were almost identical. The grain growth occurred actively at temperatures above 923 K.

Morphological control on hydroxyapatite crystals has attractive prospects in research to clarify the effects of crystal planes on biological performance. Hydrothermal processing is known as a typical type of processing for fabricating well-grown crystals with unique morphology. The purpose of the present study is to examine the feasibility of well-crystallized crystals with oriented structures through hydrothermal treatment of calcite. A single crystal of calcite was applied to hydrothermal treatment in a phosphate solution at 160˚C. Rod-shaped hydroxyapatite crystals with micrometer-size were formed on the 100 face of calcite after treatment, while nanometer-sized hydroxyapatite crystals were formed on the (111). The hydroxyapatite crystals formed on each plane were not morphologically changed with increasing treatment periods. An oriented structure of rod-shaped hydroxyapatite was constructed after hydrothermal treatment of 100 planes on the calcite single, while such orientation was not observed on the (111) plane after the treatment. The layer of hydroxyapatite formed on the 100 plane was thicker than that of the (111) plane. The 100 plane of calcite shows a higher reactivity than that of the (111) plane, which results in rapid crystal growth of hydroxyapatite. The difference in the morphology of the formed hydroxyapatite was governed by the reactivity of each crystal plane exposed to the surrounding solution.

Ag pastes added to Bi-oxide frits have been applied to the electrode material of Si solar cells. It has been reported that frits induce contacts between the Ag electrodes and the Si wafer after firing. During firing, the control of interfaces among Ag, the glass layer, and Si is one of the key factors for improving cell performance. Specifically, the thermo-physical properties of frits considerably influence Ag-Si contact. Therefore, the thermal properties of frits should be carefully controlled to enhance the efficiency of cells. In this study, the interface structures among Ag electrodes, glass layers, and recrystallites on an n+ emitter were carefully analyzed with the thermal properties of lead-free frits. First, a cross-section of the area between the Ag electrodes and the Si wafer was studied in order to understand the interface structures in light of the thermal properties of the frits. The depth and area of the pits formed in the Si wafer were quantitatively calculated with the thermal properties of frits. The area of the glass layers between the Ag electrodes and Si, and the distribution of recrystallites on the n+ emitter, were measured from a macroscopic point of view with the characteristics of the frits. Our studies suggest that the thermophysical properties should be controlled for the optimal performance of Si solar cells; our studies also show why cell performance deteriorated due to the high viscosity of frits in Ag pastes.

Significant improvements in the switching voltage distribution are required for the development of unipolar resistivememory devices using MnOx thin films. The Vset of the as-grown MnOx film ranged from 1 to 6.2 V, whereas the Vset of theoxygen-annealed film ranged from 2.3 to 3 V. An excess of oxygen in an MnOx film leads to an increase in Mn4+ contentat the MnOx film surface with a subsequent change in the Mn4+/Mn3+ ratio at the surface. This was attributed to the changein Mn4+/Mn3+ ratios at the MnOx surface and to grain growth. Oxygen annealing is a possible solution for improving theswitching voltage distribution of MnOx thin films. In addition, crystalline MnOx can help stabilize the Vset and Vreset distributionin memory switching in a Ti/MnOx/Pt structure. The improved uniformity was attributed not only to the change of thecrystallinity but also to the redox reaction at the interface between Ti and MnOx.