Methotrexate의 영향은 혼탁매질에서 형광체, 산란체와 응흡수체에 의해 파장과 산란된 형광 세기로 규명되는데, laser induced fluorescence(LIF) 분광학에 의해 분자특성으로 나타난다. 산란매질에서 광학적 효과는 광학적 파라미터들((μs, μa, μt)에 의해 표현되고 응집은 고-액상 분리공정에서 중요하게 활용되고 있다. 따라서 입자가 서로 접근될 때 콜로이드 입자들의 상호작용을 LIF와 응집효과로 분석하였다. 산란계수는 산란매질, L-α-Phosphatidylcholine의 농도가 증가함에 따라 산란 광학적 파라미터가 증가하였으나 흡수 파라미터는 감소하였다. 광학적 파라미터들은 레이저 광원에서 검출기까지 깊이의 함수에 의해 깊이가 깊어짐에 따라 산란세기가 기하급수적으로 감소함을 알 수 있다. 이는 유지화학, 생의학 생성물, 레이저 의학, 의공학 분야적용에 LIF와 입자이동 현상은 아주 적합한 모델 연구에 큰 도움이 될 것이다.

고농도 유기질 폐수처리를 위해 전기화학적 방법의 사용에 있어 관심이 고조되고 있다. 전기화학적 방법의 기술은 음식물폐수 및 공업적 폐수 문제를 해결하는데 이상적 처리 방법이다. 다른 화학적 처리 방법과는 다르게 전기화학적 처리장치는 2차 폐수의 부피를 증가시키지 않고 용수와 유기질 비료로 재활용한다. 전기화학적 방법은 전해부상장치를 무기화학적 약품과 병행하여 더욱 효과적으로 음식물 폐수를 처리한다. 이 연구는 2차 처리로 초음파와 오존처리로 탈색, COD와 BOD가 격감함으로 용수 및 유기질 비료로 활용하도록 실험하였다.

본 연구에서는 수용성 아크릴을 합성한 다음 수성 카제인 수지를 합성하여 기합성 완성된 아크릴 수지에 카제인 수지의 적하량을 점차 증가시켜 변화하는 물성을 피혁(Lamb leather)에 표면 코팅하여 물성을 측정 분석하였다. 내용제성 측정 결과 높은 내용제성 물성을 지닌 아크릴 수지와 카제인 수지의 함량이 물성 변화에 끼치지 않았으며 모두 높은 물성치를 나타내었다. 인장 강도 측정치에서는 아크릴 단독 코팅의 측정치가 1.399kgf/mm2로 가장 낮은 수치를 나타내었으며, 카제인 수지의 합량이 제일 높은 WAC-3가 가장 높은 인장력 1.426kgf/mm2을 나타내었다. 또한 내마모도 측정에서는 WAC-3가 제일 높은 69.774 mg.loss로 우수한 물성변화를 나타내었고, 연실률의 경우 아크릴 단독 코팅인 WAR이 820 %로 가장 높은 수치를 나타내었다.

혼탁매질에서 산란체와 흡수체의 영향은 빛산란에 의해 파장에 대한 산란세기로 설명된다. New Austria Tunnel Method의 수지에 대한 산란의 분자특성들은 연구하기 위해 Monte Carlo Simulation하였다. 이는 산란매질에서 광학적 파라미터들(μs, μa, μt)에 의해 조사되어 그들의 영향을 알 수 있었다. 산란매질에서 광자에 대한 빛분포에 의한 결과는 광원에서 검출기까지 거리가 가까우면 산란이 증가하여 산란세기가 크게 나타났다. 이는 강구조물의 내구성을 위한 코팅과 부식에서 좋은 모델을 디자인하는데 도움이 될 것이다.

본 연구에서는 밀크 카제인과 WPU를 이용한 하이브리드 수지를 합성하였다. 합성한 하이브리드 수지를 피혁(Full-Grain) 표면에 코팅을 하여 카제인이 하이브리드수지에 어떤 영향을 주는지에 대해 분석 하였다. 내용제성 테스트 데이터에 의하면 WPU 와 하이브리드 수지 양쪽 모두 높은 물성치를 나타내었다. 인장 강도 측정치에서는 WPU 단독 결과(2.130 kgf/mm2)가 가장 낮은 수치를 나타내었으며, WPC-3(WPU 91: casein resin 9)의 경우가 가장 높은 인장력(2.191 kgf/mm2)을 나타내었다. 또한 내마모도 측정에서는 WPC-3(50.090 mg.loss)가 좋은 물성값을 나타내었다. 연실률의 경우 WPU(637 %) 단독 코팅물의 분석값이 가장 높은 637%로 알 수 있었다.

미세 조직은 SEM, FT-IR 스펙트라, 인장특성, 그리고 [NCO]/[OH]의 mole %, 입도분석에 의해 측정하였다. 친환경적인 NATM에 관한 관심이 고조됨에 따라 스테인레스같은 금속코팅에 더욱더 중요한 열경화 무용제 수지를 합성 하였다. 이 수지는 일반적 도료와 비교하여 매우 강도가 강하고 내구성이 매우 좋다. 폴리우레탄 수지는 폴리올, IPDI, 실리콘 계면활성제, 촉매, 충전제로 구성된다. 폴리우레탄 화합물은 가교제가 첨가된 수지가 가교제가 첨가되지 않은 수지보다 물성이 우수함을 나타냈다. 견고한 폴리우레탄 도료의 기계적 특성은 [NCO]/[OH]와 가교제가 증가함에 따라 강도가 증가하였다. 합성한 도료의 물성 향상은 스테인레스 산업뿐만 아니라 다양한 산업에서 폴리우레탄 고분자 수지가 강구조물의 보수보강에 많은 응용이 기대된다.

L-arpartic acid의 산란혼탁매질에서 형광, 산란과 응집의 영향은 파장과 산란된 형광세기로 나타내는데, laser induced fluorescence(LIF) 분광학에 의한 분자특성으로 나타난다. 산란매질에서 광학적 효과는 광학적 파라미터들(μs, μa, μt)에 의해 표현되고 응집은 고-액상 분리공정에서 중요하게 활용되고 있다. 따라서 입자가 서로 접근될 때 콜로이드 입자들의 상호작용을 LIF와 응집효과로 분석하였다. 레이저 광원에서 검출기까지 농도의 함수에 의해 농도가 묽어짐에 따라 산란세기가 기하급수적으로 감소함을 알 수 있다. 이는 유지화학, 생의학 생성물, 레이저 의학, 의공학 분야적용에 LIF와 입자이동 현상은 아주 적합한 모델 연구에 큰 도움이 될 것이다.

N-(fluorodichlomethylthio) phthalimide-silver complexes were prepared and investigated the antimicrobial activity on rubber mat manufactured with waste rubber. We are exposed to harmful bacteria and fungi all the time. We manufactured antimicrobial mat to be imposed to mats that it can prevent generation of bacteria and microorganisms, and restrict their reproduction. Infection of medical devices causes significant morbidity and mortality. For aim of this study, we measured the antimicrobial mat manufactured with N-(fluorodichlomethylthio) phthalimide-Ag complex by CCD, FT-IR and NMR. The effect of mole ratio of N-(fluorodichlomethylthio) phthalimide-Ag complex on antibacterial activity to bacteria and fungi is investigated. Reduction rate is evaluated using the Quinn method. Escherichia Coli is effectively inhibited than Staphylococcus aureus by antimicrobial mat.

In this study we experimented that how polyurethane effect to acrylic-polyurethane resin in Full-Grain leather coatings. First of all, we consummated waterborne acrylic emulsion and waterborne polyurethane resin, Than we prepared F.G leathers which were coated by acrylic resin and acrylic-polyurethane resins. According to measured data for solvent resistance, acrylic resin and acrylic-polyurethane resins had good property. Sample a(WAC) had most low strength(2.10kgf/mm2) and sample d(WAC 93 : WPU 7) had most high strength(3.41kgf/mm2). Also we knew that most good property of abrasion is d(47.4 mg). In elongation case, a(WAC) had most good result(645 %) in this experiment.

Antioxidant agent, 1,1,3-tris(2-methyl-4-hydroxy-5-tert-butylphenyl)butane were prepared and investigated the antioxidant activity on recycled rubber mat manufactured with waste tire powder. Mechanical properties of rubber mat are influenced by many factor such as compounding ingredients and state of cure, process of rubber, and fillers. Our study aim is to investigate influence of antioxidant activities on ozone cracking and the thermal aging time. In this work, the degradation of recycled rubber mat was studied and suggested mechanism to involve two-type of degradation, thermal aging and cracking both of which can be contained antioxidant or non-antioxidant agent.

The excess volumes of mixing of benzyl alcohol and halothane in vesicle and in suspensions of several lipids have been determined at 25℃ it using a excess volume dilatometer. The potency of general anesthetics has long been known to correlate with lipid solubility. Denaturations of the vesicle, which is a sole membrane protein in the purple membrane of Halobacteriun Halobium, were studied by absorption changes at 280 nm and fluorescence changes at 330 nm and excess volume dilatometer. The particle size analysis of viscous polymer solutions by diffusional interchange is the key step by measurement. The excess volume of mixing in chitosan was found to be negative, whereas them of purple membrane, Halobacteriun Halobium and red membrane were positive in benzyl alcohol and halothane. This result was confirmed as Miller's supposition.

In this study we experimented that how chain extension influences to waterborne urethane-acrylic hybrid resin for leather garment coatings. We knew that polyurethane-acrylic hybrid resins had 5 grades of solvent resistance. Tensile strength measured in the polyurethane-acrylic resin(EDA 5.37 g, 1.928 kgf/mm2) had the most strong strength. Also polyurethane-acylic hybrid resin(EDA 5.37 g. 30.2 mg. loss) had better result than other hybrid resins. EDA contents higher, we obtained low elongation and low flexibility. In this result, chain extension of waterborne polyurethane-acrylic hybrid resin showed the effect in leather coating with ratio of EDA.

In this study, we experimented that how influence chain extension to waterborne urethane-epoxy hybrid resin for leather garment coatings. First of all, We had analyzed datas by FT-IR, SEM and machanical properties. By instruments analysis measurement we confirmed that synthesis of epoxy and hybrid resin. In this experiment we knew that polyurethane-epoxy hybrid resin have 5 grades of solvent resistance. Tensile strength measured in the polyurethane-epoxy resin(EDA 5.37g, 2.386 kgf/mm2) had the most strong strength.. Also polyurethane-epoxy hybrid resin had better result(EDA 5.37g. 37.4 mg. loss) than other hybrid resins. As hight proportion of EDA in hybid resin, we obtained low elongation and low flexibility. In this result, chain extension of waterborne polyurethane-epoxy hybrid resin showed that how effect in leather coating by ratio of EDA.

The study of wave propagation and scattering in biological media has become increasingly important in recent years. The propagation of light within tissues is an important problem that confronts the dosimetry of therapeutic laser delivery and the development of diagnostic spectroscopy. In the clinical application of photodynamic therapy(PDT) and in photobiology, the photon deposition within a tissue determines the spatial distribution of photochemical reactions. Scattered light is measured as a function of the distance (r) between the axis of the incident beam and the detection spot. Consequently, knowledge of the photosensitizer(Chlorophyll-a) function that characterizes a phantom is measured. To obtain the results of scattering coefficients(μs) of a turbid material from diffusion described by experimental approach. It was measured the energy fluency of photon radiation at the position of penetration depth. From fluorescence experimental method obtained the analytical expression for the scattered light as the values of (I/Io)wavelength vs the distance between the center of the incident beam and optical fiber in terms of the condition of "in situ spectroscopy(optically thick)" and real time by fluorometric measurements. The result was compromised with transport of intensities though a random distribution of scatters.

In this study, we experimented that how to synthesis waterborne urethane-epoxy hybrid resin for leather garment coatings. First of all, We had analyzed datas by FT-IR, SEM and TGA for the machanical properties. By instruments analysis measurement we confirmed that synthesis of urethane and epoxy. In this experiment we knew that polyurethane and urethane-epoxy hybrid resin have 4~5 grades of solvent resistance. Tensile strength measured in the urethane-epoxy resin(epoxy 12%, 2.033kgf/mm2) had the most strong strength than polyurethane(1.833 kgf/mm2) emulsion samples. Also urethane-epoxy hybrid resin had better result than polyurethane in acid resistance and abrasion test. As hight proportion of epoxy in hybid resin, we obtained low elongation and low flexibility. In this result, the mechanical properties of waterborne polyurethane-epoxy hybrid resin showed that how effect in leather coating by ratio of epoxy emulsion.

In this study, we experimented that how to synthesis waterborne urethane-acrylic hybrid resin for leather coatings. First of all, We had analyzed data by FT-IR, SEM and TGA for the machanical properties. By TGA analysis polymers showed heat distortion temperature. and by FT-IR measurement we confirmed that synthesis of urethane and acrylic. In the experiment, solvent resistance, polyurethane and acrylic grades 4-5 showed both a high. Tensile strength measured in the waterborne polyurethane 〉 Acrylic emulsion showed strength in the order. Films were obtained by coating the water born resin on leveled surfaces and allowing them to dry at room temperature for 72hrs. After demolding, the films were kept in a desiccator to avoid moisture contant at 25℃ for 45hrs before the measurements. In this result, the mechanical propersies of waterborne polyurethane-acrylic hybrid resin showed that how effect to resin in leather coating between polyurethane content and acrylic content. Therefore, acrylic emulsion had most high solvent resistance glade and waterborne polyurethane had good result in abrasion test and tensile strength.

Dipalmitoyl phosphatidyl choline and p-nitrophenyl palmitate were directly sonicated in acidic water for 6 minutes to give clear stock solutions. The catalytic hydrolysis of p-nitrophenyl palmitate was studied at 30-50℃ in the presence of unilamellar vesicle and mixture of unilamellar and multilamellar aggregates. The difference of reaction rate between unilamellar and multilamellar was observed. The rate of unilamellar reaction compared to the rate of mixture reaction showed more catalytic effect. The phase transition temperature of vesicle was measured at 37-44℃.

The distribution of light in a randomly scattering medium can represent problems found in many area. Particularly, in the clinical application of lasers for Photodynamic therapy(PDT) or in the fluorescence spectroscopy for biological tissue, turbidity plays a very important role. The influences of fluorophor, scatterer, and absorber in turbid material by light scattering were interpreted for the scattered fluorescence intensity and wavelength. The molecular properties have been studied by laser induced fluorescence spectroscopy in scattering medium as tissue. It has been found that the effects of optical properties in scattering media could be investigated by the optical parameters(μs, μa ,μt). Experimental and Monte Carlo simulation method for modelling light transport in tissue was applied. The experimental results using a randomly distributed scattering medium were discussed and compared with those obtained through Monte Carlo simulation. It'll be also important in designing the best model for oil chemistry, medicine and application of medical engineering.

Experiments were conducted to analyze the concentration of sulfur compounds present in ambient air at the pg or ppt level. The compounds were estimated using GC/PFPD (Gas Chromatography with Pulsed Flame Photometric Detector) analyses with a Thermal Desorber (TD). The analytical results showed very stable and precise retention time values (RSD: ＜ 0.22%), peak area (RSD: ＜ 3.9); the coefficients of the calibration curves were also determined (r²: ＞ 0.991). Also, with respect to the recovery rates of the sulfur compounds from dry air, those for H₂S, MM, DMS and DMDS were 94, 100, 113 and 114%, respectively. In order to evaluate the sulfur chemicals in humid air, a study was conducted at RH of 55 and 100%. The recovery rate at a relative humidity of 55% was similar to that under dry conditions. However, recovery rates of H₂S and MM at RH 100% were reduced to 70 and 77%, respectively.

본 논문은 가장 극한 조건(공정모델-2)에서 화학 제염한 경우 원자로 냉각재 펌프용 스테인리스강의 내식성 평가에 관하여 연구하였다. 사이클 경과에 따른 304 스테인리스강의 전기화학적 특성은 다른 스테인리스 강보다 우수한 특성을 나타냈다. 또한 공정모델-1과 공정모델-2의 304 스테인리스강은 가장 낮은 무게 감량을 나타냈다. 공정모델 용액에서 304 스테인리스강, 415 스테인리스강, 431 스테인리스강에 대한 실험 결과 공정모델-1에 대한 공정모델-2의 무게감량비는 각각 2.908, 2.372,그리고 2.370배를 나타냈다. 그 이유는 공정모델-2의 경우가 공정모델-1에 비하여 화학약품 농도나 온도가 높은 가혹한 조건에 기인한 것으로 사료된다.