멸강나방은 중국 내 개체군이 북쪽 지역으로 2차 이주를 할 때, 봄철 제트기류를 타고 국내로 유입되는 비래해 충이다. 집단으로 발생 시 벼, 옥수수, 수수 등 여러 작물에 큰 피해를 준다. 2020년과 2021년 북방접경 세 지역(백령 도, 연천, 고성)과 수원 지역에서 성페로몬트랩을 이용하여 멸강나방의 성충 발생 시기를 탐지하였다. 일반적으 로 수원지역은 4월 하순 혹은 5월 상순에 최초 유인되었으나 두 해 여러 지역에서 공통적으로 탐지되는 시기는 6월 초중순이었다. 미국 해양대기청(NOAA)에서 제공하는 역궤적 분석프로그램(HYSPLIT)을 이용하여 각 지 역에서 멸강나방이 포획된 날짜 별 지상 300, 500, 700, 1000 m의 36~72시간 역궤적 분석을 수행하였다. 이후 같은 시기에 중국 내 멸강나방이 분포할 가능성이 높은 지역(32~40 ºN)을 비래 근원지로 추정하였다. 2021년 수원과 백령도에서 공통적으로 산둥성(山东省)이 근원지로 추정되었다. 공통적으로 산둥성(山东省)과 장수성(江苏 省)이 주 비래지로 추정되었고, 추가적으로 백령도는 허베이성(河北省), 수원은 안후이성(安徽省), 허베이성(河 北省), 저장성(浙江省)도 가능성이 있는 지역으로 추정되었다.

An outbreak of stick insects, Ramulus mikado, as forest pests in South Korea has become a topic of concern. While other countries have reported these insects being severely affected by the entomopathogenic fungus Metarhizium spp., comprehensive research in South Korea remains limited on this topic. In our two-year investigation, we investigated the infection rate and mortality of R. mikado caused by Metarhizium anisopliae. In 2022, specimens were collected from Cheonggyesan, and in 2023 from Geumamsan. Although no infections were confirmed in the specimens collected in June of both years. Beginning in July, mortality and infection rates were greatly increased. In conclusion, the summer monsoon appears to create hot and humid conditions in the forest, contributing to reduced survival rates for these insects due to infection by M. anisopliae.

대벌레(Ramulus mikado)는 1990년 이후부터 2000년대 초반까지 경북을 중심으로 대발생을 하였던 돌발 해충 으로 2020~2023년에 수도권에서 대발생 사례가 다수 보고 되었다. 대벌레의 대발생 원인으로 기후변화가 지목되 고 있지만, 대벌레 개체군과 생물적·비생물적 환경 조건과의 관계를 이해하기 위한 연구는 매우 부족한 실정이 다. 본 연구에서는 주요 기주식물과 대벌레 발생 양상에 대한 관계를 이해하고자 수행하였다. 2022년부터 2023년 까지 대벌레 대발생 지역 중 하나인 청계산 일대 등산로를 따라 조사구를 선정한 뒤 주요 기주식물이자 우점종인 신갈나무, 아까시나무, 잔털벚나무를 대상으로 대벌레의 발생 밀도를 조사하였다. 그 결과, 조사지점 간의 대벌 레 평균 밀도는 유의한 차이가 발견되지 않았지만, 기주식물에 따른 밀도의 차이는 뚜렷하게 나타났다.

화분매개의존도는 밀원가치를 평가하는데 매우 필요한 자료임에도 불구하고, 산림 자원에 대한 화분매개의 존도 자료는 매우 부족하다 본 연구는 국내 중부지방에 분포하는 밀원수를 대상으로 화분매개의존도, 화밀/화분 생산량 및 꽃의 형태학적 특징을 규명을 목적으로 하였다. 화분매개의존도는 개화 전 꽃봉오리를 망사를 씌워 화분매개자의 출입을 제한 후, 결실률을 조사하여 평가했다. 화밀은 모세관 튜브를 이용하여 조사하며, 화분은 꽃가루의 수와 무게 측정을 통해 생산량을 추정하였다. 식물의 특징으로는 각 식물의 본 당 꽃 수, 개화시기, 화관 및 화서의 형태 등 형태적 특징을 조사하였다. 65종 평균 화분매개자 의존도는 평균 56±3.12%로 나타났고, 최대 100%(산수유), 최소 0%(상수리)로 나타났다. 45종의 화밀 및 화분량을 추정한 결과, 꽃 당 평균 화밀의 분비량은 인동 3.56±0.33㎕으로 가장 높았으나, 본 당 평균 화밀 분비량은 피나무 212.7㎖로 가장 높았다. 평균 화분의 무게는 피나무가 141.75g로 가장 많았다. 꽃 당 화밀량은 밀원수의 개화하는 시기가 봄에서 여름이 가까워질수록 적어졌 으나, 7, 8월에는 본 당 꽃의 수가 증가하여 여름에 개화하는 식물들이 본 당 화밀의 양을 더 많이 분비하는 경향을 확인하였다. 이는 산림 생태계의 밀원가치를 평가하는데 기초적인 자료로 활용될 수 있을 것으로 판단된다.

This study investigated unrecorded freshwater bacterial species in Korea. Water and sediment samples were collected from the Nakdong River basin from 2020-2022. Bacterial isolates obtained through the conventional culture method with commercial media were subjected to 16S rRNA gene sequencing to identify unrecorded bacterial species. Results of 16S rRNA gene sequencing of the bacterial isolates revealed that a total of 44 bacterial isolates shared 16S rRNA gene sequence similarities of more than 98.65%, with validly published bacterial species not reported in Korea yet. These isolates were phylogenetically assigned to 4 phyla, 7 classes, 21 orders, 33 families, and 42 genera. A total of 2, 6, 12, and 24 species belonged to phyla Bacillota, Bacteroidota, Actinomycetota, and Pseudomonadota, respectively. Here, we provide details of these 44 unrecorded bacterial species, including Gram staining, colony and cellular morphologies, biochemical properties, and phylogenetic position.

Buckwheat (Fagopyrum esculentum), which is a traditional Korean crop, has been known as a health food due to its rich nutrition. This study was conducted to evaluate the change in flavonoid content of flowers and seeds during post-flowering growth of Korean tartary buckwheat variety ‘Hwanggeummiso’, with the aim of providing basic data for the development of functional food and feed additive. Tartary buckwheat took 69 and 99 days from the sowing date to reach the flowering and maturity stages, respectively. As a result of examining the flavonoid components of each part of tartary buckwheat, chlorogenic acid, rutin, and isoquercitrin of flowers increased from the flowering period on 22 May (0 days after flowering) to 42 days after flowering, while quercetin increased until 21 days after flowering and then decreased thereafter. In seeds, chlorogenic acid, rutin, and isoquercitrin were most abundant at the time of seed-bearing on 14 days after flowering, and showed a decreasing tendency thereafter. On the other hand, quercetin showed a tendency to increase until 21 days after flowering and then decrease. Overall, the flavonoid content was higher in flowers than in seeds, with rutin being particularly prominent. Based on this, the possibility as food materials and feed additives was confirmed using buckwheat produced in Korea.

A 14-year-old castrated male Shih Tzu presented with acute hemorrhagic vomiting. The initial medical records indicated a probable diagnosis of acute gastritis due to inappropriate food intake. Although gastrointestinal (GI) endoscopy was the preferred diagnostic approach, the client declined anesthesia because of the dog’s underlying heart condition. Therefore, we opted for anesthesia-free capsule endoscopy. The procedure identified severe gastritis with no detectable abnormalities in the other GI regions. Following diagnosis, dietary modifications and omeprazole treatment were initiated, resulting in the resolution of clinical symptoms. Follow- up capsule endoscopy 3 weeks later verified a significant improvement in gastritis. This case highlights the potential of capsule endoscopy as a valuable diagnostic tool in patients presenting with acute vomiting.

Instagram marketing is a popular tool for communication in the tourism industry. However, research into effective execution tactics has been limited to the content, recipient characteristics, and sender types (e.g., celebrities) (i.e., Ferwerda & Tkalcic, 2018; Jin et al., 2019; Singh, 2020). The layouts of Instagram ads themselves have received little scholarly attention. Instagram ads typically convey multiple pieces of information in a single advertisement unit, raising concerns about the significance of the order in which the information is presented. Specifically, we must understand how different orders of presenting information affect a firm’s performance. Therefore, this study investigates the effect of presentation order on consumer behavioral intentions toward tour programs promoted on Instagram.

Drawing from the uses and gratification theory (UGT), the study intends to investigate audiences’ motivation to watch Livestream and its influence on subscription and donation. The roles of viewers’ parasocial relationships and identification with live streamers were also examined. The results also indicate the presence of a mediation effect.

The decommissioning of the Nuclear Power Plant (NPP) is a long-term project of more than 15 years and will be carried out as a project, which will require project management skills accordingly. The risk of decommissioning project is a combination of many factors such as the decommissioning plan, the matters licensed by the regulatory agency, the design and implementation of dismantling, the dismantling plan and organization, and stakeholders. There will be some difficulties in risk management because key assumptions about many factors and the contents of major risks should be well considered. Risk management typically performs a series of processes ranging from identification and analysis to evaluation. In order to analyze and evaluate risks here, identification of potential risks is the first step, and in order to reasonably select potential risks, various factors mentioned should be considered. Therefore, the purpose of this study is to identify possible risks that should be considered for the decommissioning project in various aspects. The risk of the decommissioning project can be defined using the hazard keyword, and the risk family presented in the IAEA safety series can also be referred. It would be better to approach the radiological or non-radiological risks that may occur in the dismantling work with the hazard keyword, and if the characteristics of the decommissioning project are reflected, it would be a good idea to approach it on a risk family basis. There are 10 top risks in the risk family, 25 risks at the level 2 and 61 risks at the level 3 are presented. It may be complex to consider these hazards and risks recommended as risk families at the same time, so using the results of safety evaluation as input data for risk identification can be a reasonable approach. Therefore, this study intended to derive the possible risks of the decommissioning project based on the risk family structure. At this point, the reflection of the safety assessment results was intended to be materialized by considering the hazards checklist. As a result, this study defined and example of 38 possible risks for the decommissioning project, considering the 10 top risk family and lower level risk categories. This result is not finalized, and it will be necessary to further strengthened through expert workshops or HAZOP in the future.

The decommissioning of Korea’s nuclear power facilities is expected to take place starting with the Kori Unit 1 followed by the Wolsong Unit 1. In Korea, since there is no experience of decommissioning, considerations of site selection for the waste treatment facilities and reasonable selection methods will be needed. Only when factors to be considered for construction are properly selected and their effects are properly analyzed, it will be possible to operate a treatment facility suitable for future decommissioning projects. Therefore, this study aims to derive factors to be considered for the site selection of treatment facilities and present a reasonable selection methodology through evaluation of these factors. In order to select a site for waste treatment facilities, three virtual locations were applied in this study: warehouse 1 to warehouse 3. Such a virtual warehouse could be regarded as a site for construction warehouses, material warehouses, annexed building sites, and parking lots in nuclear facilities. If the selection of preliminary sites was made in the draft, then it is necessary to select the influencing factors for these sites. The site of the treatment facility shall be suitable for the transfer of the waste from the place where the dismantling waste is generated to the treatment facility. In addition, in order for construction to take place, interference with existing facilities and safety should not be affected, and it should not be complicated or narrow during construction. Considering the foundation and accessibility, the construction of the facility should be economical, and the final dismantling of the facility should also be easy. In order to determine one final preferred plan with three hypothetical locations and five influencing factors, there will be complex aspects and it will be difficult to maintain consistency as the evaluation between each factor progresses. Therefore, we introduce the Analytic Hierarchical Process (AHP) methodology to perform pairwise comparison between factors to derive an optimal plan. One optimal plan was selected by evaluating the three virtual places and five factors of consideration presented in this study. Given the complexity and consistency of multiple influencing factors present and prioritizing them, AHP tools help users make decisions easier by providing simple and useful features. Above all, it will be most important to secure sufficient grounds for pairwise comparison between influencing factors and conduct an evaluation based on this.

Kori Unit 1 is about 600MW Pressurized Light Water Reactor as WH type. KHNP got an approval for construction and operation of Kori unit 1 on May 31, 1972 and started commercial operation from Apr. 29, 1987. And then, it was decided to permanently suspend it on Jun. 18, 2017 after 40 years of commercial operation. The Nuclear Safety Act stipulates that if a commercial nuclear power plant is permanently suspended, the utility must submit a Final Decommissioning Plan (FDP) within 5 years. So, KHNP, the utility, developed a FDP for Kori Unit 1 and submitted it to the government in May 2021. In South Korea, the FDP is to be prepared in accordance with the relevant notices and consists of 11 major chapters such as (1) Decommissioning Plan Overview, (2) Project management, (3) Status of Site and Environmental, (4) Decommissioning Strategies and Method, (5) Ease of Decom. Design characteristic, (6) Safety Analysis, (7) Radiation Protection, (8) Decontamination and Dismantling, (9) Radioactive Waste Management, (10) Environmental Impact Analysis, (11) Fire Protection and (12, 13) Etc., References and Glossary. KHNP has prepared a strategy and system consisting of three areas such as R&D, Engineering and licensing document development to prepare the final decommissioning plan for Kori Unit 1. The promotion system for the preparation of the FDP for Kori Unit 1 is composed of Engineering (HAS Characterization, Dismantling Safety Evaluation, Radiological Environmental Report, Radioactive Waste Treatment and Facility Construction), R&D(KHNP R&D Results such as Process/Work Package /Cost Estimation, Safety Analysis, Contamination and Exposure, Guide for Detailed Characteristic, Site Safety Analysis, RV & RVI Dismantling Process, etc.), Overseas case lessons learned(Taiwan unit 1 NPP FDP and Spain Zorita NPP FDP analysis) and Development of Licensing Document. KHNP completed the initial completion of the Final Decommissioning Plan for Kori Unit 1 in March 2020 and carried out collecting residents’ opinions through public hearings. And then, KHNP supplemented the results of the residents’ opinions and applied for license to the Nuclear Safety and Security Commission in May, 2021. Now, KHNP are responding to the FDP licensing review.

Laser cutting technology capable of remote cutting is being developed to reduce radiation exposure to workers and minimize secondary waste generation when dismantling highly polluted nuclear power plant facilities (reactors, pressurizers, steam generators, coolant pumps, etc.). Laser cutting proceeds in air or water, and at this time, secondary products containing radioactive materials are inevitably generated. In air cutting, dust and aerosol are generated, and in underwater cutting, aerosol, water vapor, dispersed particles (colloid, suspension), sediment (dross, sediment), and radioactive waste liquid are generated. Dispersed particles float in the form of fine particles in water, increasing the turbidity of water as cutting progresses, hindering work, and aerosols contain micrometer-sized particles together with water vapor, which can threaten the safety of workers. Particles dispersed in water and aerosol are within 10% of the mass ratio among secondary products, but the volume they occupy is very large, which can have a significant impact on the environment as well as a burden on treatment capacity. Various characterization methods are being developed to diagnose the generation mechanism and physical and chemical properties of laser cutting secondary products in real time and to secure technologies for collecting and removing dispersed particles and aerosols in water. This study introduces a real-time laser cutting secondary product characteristic evaluation method that can identify the key mechanisms of secondary product generation by analyzing the plasma formation process on laser cutting surface and behavior of aerosol, underwater dispersed particles produced by secondary products, as well as physical and chemical properties in real time with various measurement technologies such as Optical Emission Spectrometer (OES), Particle Size Analyzer (PSA), Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), Energy-dispersive X-ray spectroscopy (EDX), Transmission electron microscopy (TEM) and Inductively Coupled Plasma Time-of-Flight Mass Spectrometry (ICP-TOF-MS).