Buckwheat (Fagopyrum esculentum), which is a traditional Korean crop, has been known as a health food due to its rich nutrition. This study was conducted to evaluate the change in flavonoid content of flowers and seeds during post-flowering growth of Korean tartary buckwheat variety ‘Hwanggeummiso’, with the aim of providing basic data for the development of functional food and feed additive. Tartary buckwheat took 69 and 99 days from the sowing date to reach the flowering and maturity stages, respectively. As a result of examining the flavonoid components of each part of tartary buckwheat, chlorogenic acid, rutin, and isoquercitrin of flowers increased from the flowering period on 22 May (0 days after flowering) to 42 days after flowering, while quercetin increased until 21 days after flowering and then decreased thereafter. In seeds, chlorogenic acid, rutin, and isoquercitrin were most abundant at the time of seed-bearing on 14 days after flowering, and showed a decreasing tendency thereafter. On the other hand, quercetin showed a tendency to increase until 21 days after flowering and then decrease. Overall, the flavonoid content was higher in flowers than in seeds, with rutin being particularly prominent. Based on this, the possibility as food materials and feed additives was confirmed using buckwheat produced in Korea.

The 2007 Recommendation of the International Commission on Radiological Protection recommended the application of dose constraints to optimize radiation protection to resolve the inequity of exposure among radiation workers. The average annual occupational doses in Korean nuclear power plants (NPPs) are 0.3-0.8 mSv. These doses are much lower than the annual effective dose limit of 50 mSv for radiation workers stipulated by the Nuclear Safety Act. In addition, most NPP workers received less than 0.1 mSv per year. These doses are lower than the average annual occupational doses of 0.3- 0.8 mSv. Korean regulatory body conducted the study to legislate the dose constraints in the Korean regulatory system and determine dose constraints (draft) for radiation workers. The legislation of dose constraints would not greatly affect the radiation protection programs in Korean NPPs because most workers received very low doses. However, some workers received relatively higher doses than others. This study analyzed the occupational exposure conditions, such as exposure type and situation, in Korean NPPs. This study investigated the internal and external radiation doses and the radiation doses depending on the NPP operating conditions, including normal operation, planned maintenance, and intermediate maintenance, for the last ten years (2012-2021). As a result, most NPP workers received external exposure rather than internal exposure. Furthermore, most radiation exposures occurred during the planned maintenance period. The results of this study can be used for optimizing occupational doses in Korean NPPs.

The site used for a nuclear facility can be released after decommissioning if the results of dose estimation meet the regulatory requirements and the site release is approved by the regulatory body. RESRAD-ONSITE, developed by the Argonne National Laboratory, is a computer code used to estimate the dose to the residents on radiologically contaminated sites. The dose estimation for site release should consider various exposure pathways, including inhalation, ingestion, and external exposure. This study used RESRAD-ONSITE to evaluate the internal exposure dose and identify radionuclides due to the intake of food produced on radiologically contaminated sites. The upper limit of the clearance level of radionuclides expected to remain at the site was used as the source terms for the dose evaluation. In addition, the amount of food intake per capita was obtained from eight countries using nuclear power generation as of 2020. The default values of RESRAD were used for other parameters except for intake by type of food and source terms. As a result of the dose evaluation, the contaminated water and vegetables showed a great contribution to the exposure dose. The dose due to tritium in drinking water was highest in the third year. In addition, regarding the intake of vegetables, the internal exposure due to 90Sr was the highest in the first year.

As of 2023, there are a total of 24 nuclear power plants (NPPs) in operation in Korea, with 21 pressurized water reactors (PWRs) and three pressurized heavy water reactors (PHWRs). Korean NPPs discharge radioactive effluents into the environment every year. Radioactive effluents from NPPs contain various radionuclides and materials, including 3H, 14C, Noble gas, particulates, and iodine Among the radioactive effluents discharged from Korean NPPs, 14C is a pure beta emitter with a half-life of 5,730 years. The human body can inhale and ingest 14C to cause internal exposure. In addition, the amount of 14C present in the environment is decreasing, but the amount of 14C discharged from NPPs is increasing. 14C discharged to the environment can be inhaled and ingested by the public around NPPs through various pathways. For this reason, it is very important to monitor and manage 14C because it affects the dose of the public around NPPs. Therefore, this study compared and analyzed the average emissions of 14C discharged from PWRs and PHWRs during the recent 10 years (2012-2021). An average of the public dose due to 14C released from NPPs depending on the reactor types from 2012 to 2021 was also compared. It is inevitable to discharge radioactive effluents while operating NPPs. Korea Hydro & Nuclear Power (KHNP) manages and monitors radioactive effluents released into the environment. According to a survey and analysis of 14C discharged from PWRs and PHWRs and the average dose of the public over the recent 10-year (2012-2021) around Korean NPPs, 14C released from PWR accounted for 3.1% of the total discharge but accounted for more than 93.67% of the total public dose. In addition, 14C discharged from PHWRs accounted for 1.12% of the total discharge, but its resulting dose to the public accounted for more than 83.87% of the total public dose. As a result of analyzing the public dose due to 14C from 2012 to 2021, it was gradually increasing every year. Based on these results, monitoring and managing 14C discharge and its resulting doses to the public are important in the future.

After the Fukushima nuclear accident in Japan in March 2011, many Koreans were concerned that products exposed to radioactive materials released from the nuclear power plant would be imported into Korea. Systematic radiation monitoring was required for food and daily necessities imported from the nuclear accident area. The need for a legal system to support systematic radiation monitoring was also demanded. The Act on Protective Action Guidelines against Radiation in the Natural Environment was enacted to resolve concerns regarding environmental radiation in Korea in July 2011. According to this law, radiation monitoring equipment has been installed and operated at major airports and ports nationwide. This paper aims to review the radiation monitoring system of the Korean government comprehensively. The legal system and the legal basis for radiation monitoring of imported cargo conducted by each department were investigated by analyzing the laws and regulations of radiation monitoring for the relevant cargo items. In addition, the current status of radiation monitoring by the government departments was examined to determine how radiation monitoring for imported cargo is performed within the legal system. The investigation of the current radiation monitoring system for imported cargo in Korea confirmed that radiation monitoring is conducted by classifying cargo items under the jurisdiction of each government department for all imported cargo. However, the reduction in efficiency of radiation monitoring of imported cargoes, unclear legal grounds for radiation monitoring of imported cargo by some departments, the occurrence of overlapping inspections by departments, and the difficult process of issuing the radiation test certificate required for customs clearance by the Korea Customs Service were also identified. As a result of the analysis, it was found that the current radiation monitoring system for imported cargo in Korea ought to be improved, taking into account efficiency, overlapping inspection, legal background, and the difficult process of issuing the certificates.

Metal waste generated during the dismantling of a nuclear power plant can be contaminated with radionuclides. In general, the internal structure is very complex. Thus, metal waste requires various cutting processes. When metal waste is cut, aerosols are generated. Aerosols are generally various particles of very small size suspended in the working area and remain for a considerable period. This may cause internal exposure of workers due to inhalation of radioactive aerosols generated when cutting radioactive metal waste. This study investigated various cutting processes and the size distribution of aerosols generated during the cutting process. The cutting process is normally classified into thermal cutting, mechanical cutting, and laser cutting. Thermal cutting includes plasma, flame, and oxygen cutting. Mechanical cutting includes mechanical saws, cutters, nibblers, and abrasive water jets. Stainless steel, carbon steel, aluminum, and copper are commonly used as cutting materials in nuclear power plants. The size of the aerosol generated from cutting showed a very diverse distribution depending on the cutting methods and cutting materials. In general, aerosol size is distributed within 0.1-1 μm. This size distribution is different from the 5 μm aerosol size suggested by the ICRP Publication 66 Lung model. These results show that it is necessary to conduct further studies on the size of aerosols generated when decommissioning nuclear power plants.

Currently, there are 25 nuclear power plants (NPPs) in operation in Korea, including 22 pressurized water reactors (PWRs) and three pressurized heavy water reactors (PHWRs). Two NPPs, including Kori Unit 1 and Wolsong Unit 1, are permanently shut down and awaiting decommissioning. If Kori Unit 2, which is expected to be permanently shut down soon, is included, the number of decommissioning NPPs will be increased to three. Spent fuels (SFs) are continuously generated during the NPP operation, which are stored in an SF storage pool in NPPs to cool down the decay heat emitted from SFs. For safe NPP operation, SFs must be regarded as waste, and a disposal site must be selected to isolate SFs. However, an appropriate site has yet to be selected in Korea. SFs contain long-lived nuclides with a high specific activity. For disposal, it is important to characterize the nuclides in the fuels and delay the migration of the nuclides to the environment when SFs are placed in a future disposal facility. If the disposal container is broken, the nuclides in the fuels escape from the filling material, such as bentonite. These escaped nuclides are dissolved in groundwater and migrate to the surface of the earth. Thus, it is possible to assess the radiological impact, such as the exposure dose during and after the disposal, if the types and characteristics of nuclides in SFs are known. This study investigated the nuclides in SFs and identified exposure scenarios that may occur in the disposal process of SFs and migration characteristics when the nuclides leak into groundwater to propose a dose assessment methodology for workers and the public.

본 연구는 논과 밭에서 재배한 18개 사일리지용 옥수수 품종들 의 생육특성, 수량성 및 사료 가치를 비교 분석하기 위하여 수행하 였다. 논과 밭에서 출사일수는 조숙종인 신황옥이 78일로 가장 짧 았고, 강다옥이 92일로 가장 길었다. 그리고 논과 밭의 출사 일수 차이는 조숙종(6일)보다 중 ․ 만생종(10일)에서 더 크게 차이가 발생 하는 것을 확인하였다. 간장은 논에서 재배한 옥수수가 밭보다 5~10% 감소하였지만, 착수고율은 10~15% 증가되는 경향을 보여 주었다. 그러나 도복과 후기녹체성은 논과 밭에서의 큰 차이를 보이 지 않았다. 사일리지 사료가치를 증진시키는 옥수수의 암이삭 비율 은 신황옥이 논과 밭에서 55.5%, 47.8%로 가장 높았고, 대부분 품종들은 밭보다 논에서 10~30% 감소하는 것을 확인하였다. 또한 이삭길이도 10~25% 감소하였다. 생초수량은 다청옥이 밭에서 65,750 kg/ha, 논에서 33,880 kg/ha로 최고 수량을 보였다. 생초수 량과 유사하게 건물수량도 다청옥이 밭에서 26,910 kg/ha, 논에 서 21,670 kg/ha로, TDN수량은 밭에서 18,040 kg/ha, 논에서 14,390 kg/ha로 최고 수량을 보여주었다. 사일리지용 옥수수의 사 료 가치를 평가하기 위하여 조단백질, 전분을 종실에서 분석한 결 과 논과 밭에서 재배한 품종간의 차이는 보이지 않았다. 그리고 잎과 줄기, 종실을 이용하여 ADF와 NDF 함량을 분석한 결과 잎 과 줄기는 밭에서는 P3394, P1543 같은 수입종이, 논에서 재배할 때는 신광옥, 다안옥 같은 국산품종이 낮을 함량을 가지고 있었다. 또한 종실에서는 밭보다 논에서 ADF와 NDF 함량이 일부 품종에 서 감소하였지만, 대부분 품종에서는 큰 차이를 보이지 않았다. 따라서 논과 밭에서 재배한 옥수수 품종들의 사료 가치는 큰 차이 를 보이지 않으므로, 배수 관리 등을 통해 생육을 정상적으로 재배 한다면 논에서의 옥수수 수량성을 확보 할 수 있다고 판단된다

The Kori Unit 1 and Wolsong Units 1, commercial reactors in South Korea, were permanently shut down due to the expiration of their design lifetime. Therefore, nuclear power plants that have been permanently shut down must be dismantled, and the site must be finally released after removing the remaining radionuclides. Domestic regulatory standards for site remediation should not exceed 0.1 mSv per year based on effective dose. In addition, it is necessary to calculate the preliminary Derived Concentration Guideline Levels (DCGL) to prove that the conditions are met. Therefore, in this study, the input factor considering the geological characteristics of the site of Kori Unit 1 was investigated, and the preliminary Derived Concentration Guideline Levels were calculated and compared with the results of previous studies. As a result of comparative analysis, 60Co, 134Cs, and 137Cs, which are gamma-ray emitting radionuclides, had similar values to DCGL of previous studies A and B. However, 63Ni, a beta-rayemitting nuclide, was 5.94×104 Bq·g−1 in this study and 8.47×101 Bq·g−1in previous study B, resulting in a difference of about 700 times. In addition, in the case of 90Sr, this study and previous study A were derived similarly, but this study was 5.34×101 Bq·g−1 and previous study B was 1.18×10−1 Bq·g−1, resulting in a difference of about 450 times. This difference is judged to be because, unlike this study using only the industrial worker scenario, in the case of previous study B, the resident farmer scenario was mixed and used, which considers the internal exposure caused by ingestion of food produced in the contaminated area. In this study, it was confirmed that DCGL according to the change of geological factors of the site did not have a significant effect on gamma-ray-emitting nuclides. However, it was confirmed that considering the intake of food affects the DCGL of beta-ray-emitting nuclides. Therefore, there is a need to conduct future studies applying intake input factors that meet domestic conditions.

2D 퍼즐은 인기있는 보드게임이다. 2D 퍼즐을 완성하는 기술은 많이 연구되었다. 하지만 2D만으로는 대상 을 효과적으로 표현하기 어렵다는 한계가 있다. 본 연구에서는 영상으로부터 높이를 가진 2D+ 레고 퍼즐을 생성하는 방법을 제안한다. 이를 위해서 본 연구에서는 영상의 높이 맵과 분할 맵의 정보를 활용한다. 우리 는 2D+ 퍼즐에 적용하기위해 다양한 대상의 높이 및 영역 정보를 적절하게 처리해야한다. 이러한 이유로, 우리는 깊이 맵과 분할영역 맵을 추출하기 위해 모델에 심층 학습 모델을 적용한다. 높이 맵을 추출하기 위 해 우리는 CelebAMask-HQ dataset으로 학습한 BiseNet을 채택했다. 그리고 분할 맵을 얻기 위해 NYU Depth V2 dataset으로 학습한 DenseDepth를 사용했다. 입력 영상에 대해서 저해상도 영상 및 높이 맵과 분할 맵을 추출하고, 저해상도 영상을 레고 브릭의 색 팔레트를 적용한 영상에 대해서 높이 맵과 분할 맵 정보를 적용해서 높이를 가진 2D+ 픽셀 아트 영상을 생성한다. 그리고, 이 픽셀 아트 영상에 대해서 같은 높이와 같은 색을 가진 픽셀들에 대해서 최대한 큰 브릭을 적용하는 그리디 알고리즘을 적용해서 2D+ 레 고 퍼즐을 완성한다. 본 연구에서는 다양한 초상화를 대상으로 2D+ 레고 퍼즐을 완성하는 예를 제시하였으 며, 그 중 하나를 직접 제작하여 그 결과를 제시한다.

Globally, colon cancer is increased gradually and known as one of the major causes of cancer death. Stevia, a substitute of sugar, is known to have many components including alpha-tocopherol and anthocyanin etc, as antioxidants. This study's purpose is to investigate whether stevia plant extract can have a protective effect against colon carcinogenesis induced by azoxymethane (AOM) and dextran sodium sulfate (DSS) in mice. Total 30 male ICR mice were divided into 2 groups; AOM/DSS treatment (control group), AOM/DSS + stevia extract (0.5%, in drinking water). After acclimation for 1 week, five weeks old mice received three intraperitoneal AOM (10 mg/kg b.w.) injections weekly for 3 weeks (0–2nd weeks of the experiment) and 2% DSS as drinking water for the next one week. AIN-76A purified rodent diet and 0.5% stevia extract water were supplied to the animals for 6 weeks. The colons of mice were collected and the number of aberrant crypt foci (ACF) and aberrant crypts (ACs) in colonic mucosa were counted after staining with methylene blue. Malondialdehyde (MDA) concentration in feces were determined. The numbers of ACF and ACs were significantly (p<0.01) decreased in stevia-treated group compared with the control group. The MDA concentration in feces was also significantly (p<0.01) decreased in stevia-treated group compared with the control group. In histopathology of colonic epithelium, hyperplasia of colonic epithelium was less observed in steviatreated group. These results indicate that stevia has a protective effect against colon carcinogenesis induced by AOM/DSS in mice and further study needs to illustrate the protective mechanisms.

농업용 무인멀티콥터를 활용한 방제면적은 수도작은 물론 밭작물에서도 방제 범위가 확대되고 있다. 밭작물은 작물의 형태가 다양하여 비행속도, 살포높이 등을 최적화하는 연구가 필요하다. 본 연구에서는 배추, 대파, 고추에서 발생하는 나방류에 대하여 무인멀티콥터의 살포 높이에 따른 방제효과를 확인하였다. 살포된 약제가 작물에 부착되는 정도를 조사한 결과, 배추는 2m, 대파는 3~4m, 고추는 모든 높이에서 비슷한 부착정도를 보였지만, 전체적으로 부착량이 적고 불균일 하였다. 살포 높이별 방제효과는 작물별로 각각 배추(9~10엽기)는 2m높이, 고추(약 1.2m)는 2~3m, 대파(약 60cm)는 2, 3, 4m 각각 비등한 방제효과를 보였다. 각각의 작물모두 경엽처리 대비 약효가 미흡하였으며, 고추는 4m높이 살포시 방제효과가 현저히 낮았다.

This investigates the microstructure and mechanical properties of Al hybrid material prepared by electromagnetic duo-casting to determine the effect of heat treatment. The hybrid material is composed of an Al-Mg-Si alloy, pure Al and the interface between the Al-Mg-Si alloy and pure Al. It is heat-treated at 373, 573 and 773K for 1h and T6 treated (solution treatment at 773K for 1h and aging at 433K for 5h). As the temperature increases, the grain size of the Al-Mg-Si alloy in the hybrid material increases. The grain size of the T6 treated Al-Mg-Si alloy is similar to that of one heat-treated at 773K for 1h. The interface region where the micro-hardness becomes large from the pure Al to the Al-Mg-Si alloy widens with an increasing heat temperature. The hybrid material with a macro-interface parallel to the tensile direction experiences increased tensile strength, 0.2% proof stress and the decreased elongation after T6 heat treatment. On the other hand, in the vertical direction to the tensile direction, there is no great difference with heat treatment. The bending strength of the hybrid material with a long macro-interface to the bending direction is higher than that with a short macro-interface, which is improved by heat treatment. The hybrid material with a long macro-interface to the bending direction is fractured by cracking through the eutectic structure in the Al-Mg-Si alloy. However, in the hybrid material with a short macro-interface, the bending deformation is observed only in the limited pure Al.

To be better fit for highways, pavement systems are required to provide comfortable and safe driving and be structurally durable. Composite pavements can be an effective option as they are more durable by placing a high functional asphalt overlay on a rigid concrete base layer. In order to apply a composite pavement system to the field, it is necessary not only to develop technologies that prevent reflecting crack and deterioration of the base layer, but also to improve bonding performance of materials and ensure structural performance as a pavement system against traffic loading. In advanced countries like Japan, USA and Europe, high-functional composite pavement systems are being put into practice across new highway networks. In this study, we evaluated structural performance (rutting, reflecting crack, and deflection) by applying traffic loads of actual highways through an accelerated pavement tester (APT) of a composite pavement section made up of a quiet porous surface laid over a water-proofing layer, a continuously reinforced concrete base, and a lean concrete sub-base layer, which was developed with new pavement methods used for each layer prior to field application. The APT specimen was constructed with paving materials and equipment actually used on site in the same dimensions (W3.5m*L14m*H2m) as actual highway sections in Korea, and 3-axle double-wheel heavy load (45ton) cart type KALES(Korean Accelerated Loading and Environmental Simulator) traveling on the specimen in both directions was used to simulate traffic loading. After applying around 8,574,000 ESALs of traffic loads, no reflecting crack occurred on the asphalt surface of the composite pavement, without surface distress except for rutting. In order to examine what causes rutting of pavements, we surveyed thickness of pavements by layer and measured asphalt density.