농촌진흥청 국립원예특작과학원에서는 2017년에 절화 수명이 길고 수량이 많은 연한 핑크색의 스프레이 장미 ‘Pink Shine’ 을 육성하였다. 모본은 ‘Fire Flash’로 붉은 복색의 스프레이 장미이며, 부본은 ‘Pink Charm’으로 핑크색이며 흰가루병에 강하다. 이 두 품종을 2012년 인공교배하여 이듬해인 2013년 1월에 파종, 9cm 포트 묘에 정식하여 관능 평가 실시 후 도태시켜 39개체 의 실생을 얻었다. 이후 화형, 화색, 꽃잎 수, 절화수량, 병 저항성 등을 고려하여 2015년까지 5개체를 선발하여 유사 품종인 ‘Missha’를 대조로 하여 2017년까지 3차에 걸친 특성 검정을 실시하였다. 그 결과 가장 우수한 ‘원교 D1-325’를 최종선발하여 ‘Pink Shine’으로 명명 후 2018년 3월 22일 품종보호출원(제 2018-212호)하여 2019년 6월 21일에 품종보호권(제7786호)이 등록되었다. 화색은 연한 핑크색(RHS, R36D)이며 잎의 색은 녹색(RHS, G137A)으로 대조 품종 ‘Missha’와 동일하였다. 꽃잎 수는 67.8개, 화폭 5.4cm, 화고 3.2cm로 ‘Missha’보다 컸으며 평방미터당 연간 절화수량은 131본, 절화수명은 15.3일로 ‘Missha’ 보다 우수하였다.

PURPOSES : It is well known that low temperature cracking is one of the most serious distresses on asphalt pavement, especially for northern U.S. (including Alaska), Canada and the northern part of south Korea. The risk of thermal cracking can be numerically measured by estimating thermal stress of a given asphalt mixture. This thermal stress can be computed by low temperature creep testing. Currently, in-direct tensile (IDT) mixture creep test mentioned in AASHTO specification is used for measuring low temperature creep properties of a given asphalt mixture. However, IDT requires the use of expensive testing equipment for performing the sophisticated analysis process, however, very few laboratories utilize this equipment. In this paper, a new and simple performance test (SPT) method: bending beam rheometer (BBR) mixture creep testing equipment is introduced, and the estimated experimental results were compared with those of conventional IDT tests. METHODS: Three different asphalt mixtures containing reclaimed asphalt pavement (RAP) and roofing shingles were prepared in the Korea Expressway Corporation (KEC) research laboratory. Using the BBR and IDT, the low temperature creep stiffness data were measured and subsequently computed. Using a simple power-law function, the creep stiffness data were converted into relaxation modulus, and subsequently compared. Finally, thermal stress results were computed from relaxation modulus master curve using Gaussian quadrature approach with condierations of 24 Gauss number. RESULTS: In the case of the conventional asphalt mixture, similar trends were observed when the relaxation modulus and thermal stress results were compared. In the case of RAP and Shingle added mixtures, relatively different computation results were obtained. It can be estimated that different experimental surroundings and specimen sizes affected the results. CONCLUSIONS: It can be said that the BBR mixture creep test can be a more viable approach for measuring low temperature properties of asphalt mixture compared to expensive and complex IDT testing methods. However, more extensive research and analysis are required to further verify the feasibility of the BBR mixture creep test.

In the current study, a total of 102 common Todarodes pacificus squid caught in the East Sea were investigated for parasitological research. The results revealed that 33 (32.35%) out of 102 squid were infected by Nybelinia surmenicola, the mean intensity was 5.58 parasites per squid, and the maximum abundance was 11. Morphological analysis using a field emission scanning electron microscope showed the characteristic features of N. surmenicola. Molecular identification based on the 28S rRNA gene confirmed the isolated parasite as N. surmenicola, while phylogenetic analysis revealed that N. surmenicola isolated in this study was clustered with N. surmenicola isolated from Japan. This is the first report of phylogenetic characterization of N. surmenicola isolated from Korea.

배초향은 항동맥경화나 항박테리아의 특성을 가지는 한약재에 널리 사용되는 영년생 약용식물이다. 연구의 목적은 수경재배에서 배양액의 종류와 PPFD값에 따른 배초향의 생장 및 항산화 물질의 변화를 조사하는 것이다. 배초향은 주야간 16:8 시간의 일장조건에서 150과 200 μmol·m-2·s-1 PPFD 조건과 일본원시(HES), 서울시립대(UOS), 유럽채소연구소(EVR), 오오츠카 배양액(OTS)을 이용하여 6주간 재배하였다. OTS 배양액조 건에서 자란 배초향의 지상부 및 지하부 건물중은 다른 배양액 처리구와 비교하여 유의적으로 높았다. 배초향의 틸리아닌 함량은 OTS 처리에서 가장 높았으며 다음으로 EVR, HES, UOS 순서로 낮아졌다. 총 아카세틴의 함량은 EVR처리에서 가장 높았으나 OTS처리와는 유의적 차이를 보이지 않았다. 또한 200 μmol·m-2·s-1 PPFD 조건에서 자란 배초향은 PPFD 150처리구와 비교하여 유의적으로 생체중과 건물중이 증가하였으며 기능성 물질은 틸리아닌과 아카세틴의 함량도 높았다. 본 연구는 수경재배 방식을 이용하여 식물공장에서 배초향을 재배할 경우 200 μmol·m-2·s-1 PPFD 조건과 OTS 배양액 조건에서 경제적인 광원조건으로 최적 바이오매스 생산량과 틸라아닌과 아카세틴의 함량을 증가시킬 수 있을 것으로 제안한다.

경주 방사성폐기물 처분시설은 향후 80만 포장물을 처분할 계획이며 다양한 처분방식 및 관리형태를 가진 복합계가 될 것 이다. 본 논문에서는 전체부지 처분용량(80만 포장물) 처분시설의 단계별 개발에 따른 영향을 평가하기 위하여 처분시설 종 합개발계획(안)에 따른 예비안전성평가를 수행하였다. 각 시나리오에 대한 안전성평가결과 처분시설의 성능목표치를 만족 하였다. 다만, 전체처분시설의 안전성 평가결과에 중준위 방사성폐기물로 인하여 1단계 동굴 처분시설이 가장 크게 영향을 미치므로 처분시설의 안전성 향상을 위하여 처분방사능량제한 설정 등 관리방안이 필요하다. Safety Case 단계별 구축을 통 하여 중·저준위 방사성폐기물 처분시설 종합개발 과정에서 인지된 불확실성을 저감하여 안전성을 증진 시킬 수 있을 것으 로 판단된다.

For useful research animal to study human’s disease and for xenotransplantation donor, pig was studied to improve the quality of in vitro production (IVP). But, still the developmental ability of in vitro porcine embryos is still lower than in vivo embryos. Using a antioxidant is one of the strategy to overcome the drawback of in vitro producted embryos by protecting the oocyte from free radicals during in vitro maturation (IVM). Resveratrol, one of the plant-derived polyphenol antioxidants, have been used as effective antioxidants. Therefore, resveratrol treatment during IVM of porcine oocytes is expected to improve efficiency of the IVP by reducing free radical accumulation. In this study, we designed control (no treated) and resveratrol treatment groups (0, 2 and 4uM), evaluated maturation rate, cleavage rate, blastocyst formation rate and total cell number. Additionally GSH and ROS accumulation levels were measured via staining oocytes. In the results, maturation rate had not shown significant difference among the groups. However, in further development, not only the results of cleavage rate (0uM : 84.64±2.65 vs 4uM : 93.67±2.36, p<0.05) and blastocyst formation rate (0uM : 6.39± 0.90, vs 4uM : 13.67±2.32, P<0.05) were significantly increased in 4uM resveratrol treated group, and result of total cell number (0uM : 22.47±0.76 vs 2, 4uM : 30.35±1.76, 27.65±1.23, P<0.05) also shown significant difference in 2, 4uM resveratrol groups with control. GSH accumulated levels of matured oocytes in resvetrol treated groups were significantly higher than control. Meanwhile ROS levels of treated groups were significantly reduced [GSH (0uM : 142±10.49 vs 2, 4uM : 163.2±3.29, 169.7±0.94, P<0.05), ROS (0uM : 170.2±7.76 vs 2, 4uM : 118.6±7.90, 130±7.07, P<0.05)]. From these results, we conclude the treatment of resveratol improved further development of porcine embryos by regulating intracellular GSH, ROS levels during porcine IVM. Therefore, exogenous antioxidants such as a resveratol can be supportive substances for obtaining the improved quality of IVP.

The sintering mechanisms of nanoscale copper powders have been investigated. A molecular dynamics (MD) simulation with the embedded-atom method (EAM) was employed for these simulations. The dimensional changes for initial-stage sintering such as characteristic lengths, neck growth, and neck angle were calculated to understand the densification behavior of copper nano-powders. Factors affecting sintering such as the temperature, powder size, and crystalline misalignment between adjacent powders have also been studied. These results could provide information of setting the processing cycles and material designs applicable to nano-powders. In addition, it is expected that MD simulation will be a foundation for the multi-scale modeling in sintering process.

This research was conducted in order to understand the hybridization between Quercus aliena Blume and Q. serrata Murray in Korea which show wide range of morphological variations within species and interspecific variations of diverse overlapping characteristics caused by hybridization. Morphological analysis (principal components analysis; PCA) of 116 individuals representing two species and their intermediates were performed. As a result, two species were clearly distinguished in terms of morphology, and intermediate morpho-types assumed to be hybrids between the two species were mostly located in the middle of each parent species in the plot of the principal components analysis. There was a clear distinction between two species in trichome distribution pattern which is an important diagnostic character in taxonomy of genus Quercus, whereas intermediate morpho-types showed intermediate state between two species’ trichome distributions. Forty-two individuals representing two species and their intermediates were examined for leaf flavonoid constituents. Twenty-three flavonoid compounds were isolated and identified: They were glycosylated derivatives of flavonols, kaempferol, quercetin, isorhamnetin and myricetin. The flavonoid constituents of Q. aliena were five glycosylated derivatives: kaempferol 3-O-galactoside, kaempferol 3-O-glucoside, quercetin 3-O-galactoside, quercetin 3-O-glucoside, and Isorhamnetin 3-O-glucoside. The flavonoid constituents of Q. serrata had 20 diverse flavonol compounds including five flavonoid compounds found in Q. aliena. It was found that there is a clear difference in flavonoid constituents of Q. aliena and Q. serrata. Flavonoid chemistry is very useful in recognizing each species and putative hybrids. The flavonoid constituents of intermediates were a mixture of the two species’ constituents and they generally showed similar characteristics to morpho-types. The hybrids between Q. aliena and Q. serrata showed morphologically and chemically diverse characteristics and it is assumed that there are frequent interspecific hybridization and introgression.

Powder injection molding is an important manufacturing technology to mass produce superalloy components with complex shape. Injection molding step is particularly important for realizing a desired shape, which requires much time and efforts finding the optimum process condition. Therefore computer aided engineering can be very useful to find proper injection molding conditions. In this study, we have conducted a finite element method based simulation for the spiral mold test of superalloy feedstock and compared the results with experimental ones. Sensitivity analysis with both of simulation and experiment reveals that the melt temperature of superalloy feedstock is the most important factor for the full filling of mold cavity. The FEM based simulation matches well the experimental results. This study contributes to the optimization of superalloy powder injection molding process.

Although bombesin (BN) regulates colonic motility, the associated mechanism of action remains unclear. The objective of this study was to investigate the effect of BN on colonic motility using isolated rat colon. An isolated rat colon was perfused with Krebs solution via the superior mesenteric artery. Intraluminal pressure was measured via microtip catheter pressure transducers at both proximal and distal portions of the isolated colon. After a control period, BN was administered intraarterially in concentrations of 13, 26, 130, and 260 pM. After pretreatment with hexamethonium (10-3 M), atropine (10-5 M), or tetrodotoxin (10-6 M), BN was administered at a concentration of 260 pM (proximal colon) or 130 pM (distal colon); intraluminal pressure was then monitored. Changes in motility were expressed as the percentage change of motility index (MI) over the basal period. As a result, BN increased colonic motility and a dose-dependent increase in proximal colonic motility was observed. The stimulant effect of BN was almost completely abolished by atropine and tetrodotoxin at both the proximal and distal colon. However, BN was not inhibited by hexamethonium at both the proximal and distal colon. Therefore, the stimulant action of BN may be mediated by local cholinergic muscarinic receptors.

The current standard solutions for somatic cells used for calibration of electronic somatic cell counts as reference material in raw milk are preserved with bronopol, boric acid, sodium azide, or potassium dichromate, and have a shelf-life of only up to 6 days at 4 ± 2℃. In the present study, a set of somatic cell standard solutions (SCSS) with a stability of 5 months for calibration of electronic instruments was developed. Somatic cells collected from cow’s milk and stored in a bulk tank at a dairy plant were treated with 10% formaldehyde in order to improve stability, and then separated by centrifugation. The resulting somatic cell suspension was preserved with glycerin, thimerosal, and dimethyl sulfoxide, and diluted in 3% processed skim milk solution ranging from 200,000～250,000 (low level), 350,000～ 450,000 (medium level), and 550,000～650,000 (high level) cells/㎖. Each SCSS was verified by direct microscope somatic cell counting (DMSCC), C-reader, and commercial standard samples. The average somatic cell count determined by DMSCC was 248, 214, 226 × 103 cells/㎖, 436, 382, 420 × 103 cells/㎖, and 612, 595, 609 × 103 cells/㎖. The coefficient of variation representing the repeatability of DMSCC decreased as the number of cells increased, and was <10.0% in almost all SCSS samples (range 4.6～7.1%). No statistically significant difference in somatic cell concentration was observed after storage at refrigeration temperature (2～6℃) over a period of 22 weeks (5 months). The stabilized SCSS may be useful as a reference material for determination of somatic cell count and quality control in testing of bovine raw milk.

Pneumatosis cystoides intestinalis (PCI) is a rare condition characterized by multiple intramural pockets of gas filled cysts in the intestinal wall. PCI is usually found incidentally on an imaging study. Many different causes of PCI have been suggested, including mechanical, pulmonary, and bacterial causes. Treatment is usually conservative, including oxygen and antibiotic therapy. We report on two cases of PCI, without symptoms, in a 62-year-old male and a 72-year-old male. Computed tomography showed numerous, small, round, and air densities on the sigmoid colon. Colonoscopy showed numerous, variable-sized, sessile polypoid, balloon-like distended, and protruding subepithelial masses covered with normal colonic mucosa on the sigmoid colon. We observed that when the cyst was stuck with a needle, the size of the cyst was reduced and showed a flat termination. Therefore, we made a diagnosis of PCI and report on the case with references.