In this study, a smart bench was developed and researched smart benches that can contribute to user convenience and satisfaction by installing them in parks, bus stops, and tourist attractions in line with the rapidly changing construction of smart cities. The smart bench is automatically operated by the control system according to the external temperature and provides additional functions such as charging, lighting, and advertising to improve general bench functions as well as heating in winter and cooling in summer, making it suitable for smart urbanization. The developed smart bench is designed to be strong enough to withstand loads of about 2,500 N. It minimizes the visible parts such as assembled bolts and 220V power supply wires, It can also give aesthetic effects. The development was carried out with the aim of waterproofing and dustproofing of IP44 grade in accordance with the climate of Republic of Korea, which has four seasons, and it is advantageous for long-term use because the paint was selected for the weather ability (discoloration) grade 3 or higher. If smart bench is commercialized, it is believed that various options can be provided to the smart bench market, where buyers had few product options, as the parts were developed in an assembled type so that all functions can be responded in an optional form according to the installation environment and the buyer's budget.

Digitization and automation technologies have rapidly maximized productivity and efficiency in all industries over the past few decades. Construction automation technology has either stagnated over the same period or has not kept pace with overall economic productivity. According to the research studies up to now, the output of concrete structures using coarse aggregates (8mm or more) is very limited due to the limitations of equipment and materials. In this study, information on the development process of 3DCP equipment that can print concrete structures with the printing width (100 mm or more) and printing thickness (30 mm or more) using a 3DCP material mixed with coarse aggregate (8 mm or more) is provided. To verify the performance of the developed 3DCP equipment, experimental data are provided on output variables, the number of layers, and the inter-layer printing time interval. The evaluation and verification data of various mechanical properties (compressive and splitting tensile strength) of printed materials using coarse aggregates are provided.

Recently, the demand for atypical structures with functions and sculptural beauty is increasing in the construction industry. Existing mold-based structure production methods have many advantages, but building complex atypical structures represents limitations due to the cost and technical characteristics. Production methods using molding are suitable for mass production systems, but production cost, construction period, construction cost, and environmental pollution can occur in small quantity batch production. The recent trend in the construction industry calls for new construction methods of customized small quantity batch production methods that can produce various types of sophisticated structures. In addition to the economic effects of developing related technologies of 3D Concrete Printers (3DCP), it can enhance national image through the image of future technology, the international status of the construction civil engineering industry, self-reliance, and technology export. Until now, 3DCP technology has been carried out in producing and utilizing residential houses, structures, etc., on land or manufacturing on land and installing them underwater. The final purpose of this research project is to produce marine structures by directly printing various marine structures underwater with 3DCP equipment. Compared to current underwater structure construction techniques, constructing structures directly underwater using 3DCP equipment has the following advantages: 1) cost reduction effects: 2) reduction of construct time, 3) ease of manufacturing amorphous underwater structures, 4) disaster prevention effects. The core element technology of the 3DCP equipment is to extrude the transferred composite materials at a constant quantitative speed and control the printing flow of the materials smoothly while printing the output. In this study, the extruding module of the 3DCP equipment operates underwater while developing an extruding module that can control the printing flow of the material while extruding it at a constant quantitative speed and minimizing the external force that can occur during underwater printing. The research on the development of 3DCP equipment for printing concrete structures underwater and the preliminary experiment of printing concrete structures using high viscosity low-flow concrete composite materials is explained.

In the current study, a total of 102 common Todarodes pacificus squid caught in the East Sea were investigated for parasitological research. The results revealed that 33 (32.35%) out of 102 squid were infected by Nybelinia surmenicola, the mean intensity was 5.58 parasites per squid, and the maximum abundance was 11. Morphological analysis using a field emission scanning electron microscope showed the characteristic features of N. surmenicola. Molecular identification based on the 28S rRNA gene confirmed the isolated parasite as N. surmenicola, while phylogenetic analysis revealed that N. surmenicola isolated in this study was clustered with N. surmenicola isolated from Japan. This is the first report of phylogenetic characterization of N. surmenicola isolated from Korea.

The purpose of this study is to improve practical skill evaluation method of mushroom - trained certified technician's practical skill evaluation which is one of national qualification tests based on national incompetency standards. One of the current National Competency Standards (NCS), mushroom - trained certified technician uses NCS based practical assessment method. In order to improve the current practical evaluation method, we try to improve practical evaluation method based on field customized problem solving ability and improve the practical evaluation method, various evaluation methods should be constructed. On the purpose of identify the diversity and problems of the evaluation method, the experts of the group consultation, the mushroom-related research institute and the related industry collaborated to identify the problems of the actual mushroom - trained certified technician practicum test, This study on the evaluation improvement method was carried out. In this study, the contents of practical test of the current mushroom traits were analyzed and the trends of the latest mushroom industry were widely reflected.

This study is investigated the growth characteristics(number of available stipe, pileus diameter, pileus thickness, stipe length, stipe thickness, object weight, comparison yield ability of 1 cycle) and storage characteristics of ‘Sanjo 701’ (S7) cultivars according to relative humidity. The S7 growth characteristics were investigated by quantifying the growth and the characteristics according to the relative humidity, The storage stability was investigated every 5 days and freshness was measured by ‘Minamide Method’. S7 pileus diameter is The higher the relative humidity was confirmed becomes larger and the more increased relative humidity also increase the comparison yield ability of 1 cycle. However, pileus diameter or stipe length This could not see the big difference in the three treatment groups, the plieus thickness was no significant difference in the treatment of 80% and 95%. The fresh weight of S7 decreased significantly at 80% and 95% relative humidity after 10 days of storage, but decreased continuity in 65% humiditiry. The elongation percentage of S7 pileus was observe in 95% relative humidity, values of L, a and b (SCI), showed the highest L value in 65% and the a value in 95%. b values were similar in 65%, 80% and 95% treatments. On the ‘Minamide Method’ measure freshness was changed from the 10th day of storage at relative humidity of 95%, but humidity of 65% and 80% treatments, it changed after 15 days of storage. In this study growth characteristics and yield were increased at higher relative humidity, but storage stability was decreased. Therefore, it is deemed necessary to change the relative humidity to produce high quality mushrooms.

This research was relative humidity (65, 75, 85 and 95%) growth characteristics of the oak mushroom (Lentinula edodes) 'Nongjingo’. At the relative humidity was 65% in growth chamber. On this condition the moisture content of medium surface was 60.5%. That was lower than other treatments. That condition makes Pileus was 77.1% and stipe was 65%. Among the growth characteristics according to the relative humidity, the pileus diameter at 75% relative humidity were 45.5mm that largest than other treatment and pileus thickness at 75% relative humidity were largest than other treatment. The stipe thickness at 65% relative humidity were 14.8mm that lagest than other treatment. The number of available stipes at 95% relative humidity were 13.3peace/2kg that largest than other treatment. The comparison yield ability of 1 cycle was 104.2g that result in largest than other treatment at 95% relative humidity. This result was associated to the relative humidity of fruiting bodies, the lower relative humidity result in the lower of yield. However, the lower relative humidity result in the higher number of whago, Especially, at the treatment of 65% relative humidity, all the fruit bodies were produced as Whago (dry). Therefore, the higher relative humidity influenced in the higher yield but produced water mushroom. That result was thought that ‘Nongjingo’ would be possible to produce high quality mushroom by adjusting the relative humidity appropriately.