우리나라는 무기질비료 사용량이 많은 나라 중 하나이다. 그러나 1980년 이후 지속가능농업에 대한 필요성에 의해 1997년 친환경 농업육성법이 제정되었고 지속가능한 농업을 위한 연구로 논, 밭, 시설 및 과수에 대한 비료사용실태조사가 실시되고 있다. 이에 본 연구는 과수 중 대표되는 7작물(배, 포도, 사과, 복숭아, 대추, 단감, 키위)을 대상으로 각 도에서 805농가를 선정하여 실시하였으며, 조사내용은 사용하는 비료의 종류, 사용량 등에 대해 농가를 방문하여 면접 청취조사하였다. 국내 과수작물의 성분별 평균 비료사용량(N-P2O5-K2O)은 30.0-23.8-24.3 kg 10a-1이었으 며 비료 종류별로 구분하였을 때 퇴비 > 유기질비료 > 무기질비료 순으로 사용하고 있었다. 단위면적당 가장 많은 비료를 사용하고 있는 과수는 대추로 질소, 인산 및 칼리를 평균 53.3-42.0-49.5 kg 10a-1을 사용하고 있는 것으로 확인되었다. 앞으로 지속가능 농업과 농업환경의 보전을 위해서는 농가에서 사용하는 비료의 장기간 모니터링 뿐만 아니라 농업인에게 무기질비료, 유기질비료 및 퇴비의 적정사용방법에 대한 교육 및 홍보를 지속적으로 실시해야 될 것으로 판단된다.

High-entropy alloys (HEAs) are attracting attention because of their excellent properties and functions; however, they are relatively expensive compared with commercial alloys. Therefore, various efforts have been made to reduce the cost of raw materials. In this study, MIM is attempted using coarse equiatomic CoCrFeMnNi HEA powders. The mixing ratio (powder:binder) for HEA feedstock preparation is explored using torque rheometer. The block-shaped green parts are fabricated through a metal injection molding process using feedstock. The thermal debinding conditions are explored by thermogravimetric analysis, and solvent and thermal debinding are performed. It is densified under various sintering conditions considering the melting point of the HEA. The final product, which contains a small amount of non-FCC phase, is manufactured at a sintering temperature of 1250oC.

Gryllus bimaculatus is one of many cricket species known as field crickets. Also known as the African or Mediterranean field cricket or as the two-spotted cricket, it can be discriminated from other Gryllus species by the two dot-like marks on the base of its wings. G.bimaculatus is a subtropical insect and widely distributed from Africa to south Asia. After into the country, The species are popular for use as a food source for insectivorous animals like spiders and reptiles kept as pets. In 2016, was approved as a general food ingredient by Korean Ministry of Food and Drug Safety. However, domestic research on G.bimaculatus is still in its study is beginning stages. and analyze nutrtion elements as per dry conditions for processing&production of G.bimaculatus. The growth stage passing by 50 days after hatching was highest in general component and amino acid contents. The crickets passing by 50 days after hatching was highest 77% crude protein in condition hotair drying 60℃, 23% crude fat in condition freeze drying.

Oxya chinensis sinuosa Mistshenko(Orthoptera:Acrididae) was lived in clean and non polluted area. grasshopper was approved as a general food ingredient by Korean Ministry of Food and Drug Safety. general component contents was 67~75% crude protein, 5~11% crude fat in a dried state. grasshopper is a high protein food. amino acids is high. In the composition and content of amino acids, which consists of the protein is the hightes alanine, glycine(soft and sweet) and arginine, histidine(essential amino acid of children) consequently, we developed a snack for children added with grasshopper powder. general composition of snack is 8~11% crude protein, 0.2~0.75% crude fat. The protein content increased with increasing addition ratio. 3% grasshopper powder was the best in general preference.

Nanopowders provide better details for micro features and surface finish in powder injection molding processes. However, the small size of such powders induces processing challenges, such as low solid loading, high feedstock viscosity, difficulty in debinding, and distinctive sintering behavior. Therefore, the optimization of process conditions for nanopowder injection molding is essential, and it should be carefully performed. In this study, the powder injection molding process for Fe nanopowder has been optimized. The feedstock has been formulated using commercially available Fe nanopowder and a wax-based binder system. The optimal solid loading has been determined from the critical solid loading, measured by a torque rheometer. The homogeneously mixed feedstock is injected as a cylindrical green body, and solvent and thermal debinding conditions are determined by observing the weight change of the sample. The influence of the sintering temperature and holding time on the density has also been investigated. Thereafter, the Vickers hardness and grain size of the sintered samples have been measured to optimize the sintering conditions.

In this study, a finite element analysis approach is proposed to predict the fluid-structure interaction behavior of active materials for lithium-ion batteries (LIBs), which are mainly composed of graphite powder. The porous matrix of graphite powder saturated with fluid electrolyte is considered a representative volume element (RVE) model. Three different RVE models are proposed to consider the uncertainty of the powder shape and the porosity. Pwave modulus from RVE solutions are analyzed based on the microstructure and the interaction between the fluid and the graphite powder matrix. From the results, it is found that the large surface area of the active material results in low mechanical properties of LIB, which leads to poor structural durability when subjected to dynamic loads. The results obtained in this study provide useful information for predicting the mechanical safety of a battery pack.

A powder injection molding process is developed and optimized for piezoelectric PAN-PZT ceramics. Torque rheometer experiments are conducted to determine the optimal solids loading, and the rheological property of the feedstock is evaluated using a capillary rheometer. Appropriate debinding conditions are chosen using a thermal gravity analyzer, and the debound specimens are sintered using sintering conditions determined in a preliminary investigation. Piezoelectric performance measures, including the piezoelectric charge constant and dielectric constant, are measured to verify the developed process. The average values of the measured piezoelectric charge constant and dielectric constant are 455 pC/N and 1904, respectively. Powder injection molded piezoelectric ceramics produced by the optimized process show adequate piezoelectric performance compared to press-sintered piezoelectric ceramics.

Powder injection molding (PIM), which combines the advantages of powder metallurgy and plastic injection molding technologies, has become one of the most efficient methods for the net-shape production of both metal and ceramic components. In this work, plasma display panel glass bodies are prepared by the PIM process. After sintering, the hot isostatic pressing (HIP) process is adopted for improving the density and mechanical properties of the PIMed glass bodies. The mechanical and thermal behaviors of the prepared specimens are analyzed through bending tests and dilatometric analysis, respectively. After HIPing, the flexural strength of the prepared glass body reaches up to 92.17 MPa, which is 1.273 and 2.178 times that of the fused glass body and PIMed bodies, respectively. Moreover, a thermal expansion coefficient of 7.816 × 10−6/oC is obtained, which coincides with that of the raw glass powder (7.5-8.0 × 10−6/oC), indicating that the glass body is fully densified after the HIP process.

The sintering mechanisms of nanoscale copper powders have been investigated. A molecular dynamics (MD) simulation with the embedded-atom method (EAM) was employed for these simulations. The dimensional changes for initial-stage sintering such as characteristic lengths, neck growth, and neck angle were calculated to understand the densification behavior of copper nano-powders. Factors affecting sintering such as the temperature, powder size, and crystalline misalignment between adjacent powders have also been studied. These results could provide information of setting the processing cycles and material designs applicable to nano-powders. In addition, it is expected that MD simulation will be a foundation for the multi-scale modeling in sintering process.

Powder injection molding is an important manufacturing technology to mass produce superalloy components with complex shape. Injection molding step is particularly important for realizing a desired shape, which requires much time and efforts finding the optimum process condition. Therefore computer aided engineering can be very useful to find proper injection molding conditions. In this study, we have conducted a finite element method based simulation for the spiral mold test of superalloy feedstock and compared the results with experimental ones. Sensitivity analysis with both of simulation and experiment reveals that the melt temperature of superalloy feedstock is the most important factor for the full filling of mold cavity. The FEM based simulation matches well the experimental results. This study contributes to the optimization of superalloy powder injection molding process.

This study investigated the densification behavior of rhenium alloys including W-25 wt.%Re and Re-2W-1Ta (pure Re) during sintering. The dilatometry experiments were carried out to obtain the in-situ shrinkage in H2 atmo-sphere. The measured data was analyzed through shrinkage, strain rate and relative density, and then symmetricallytreated to construct the linearized form of master sintering curve (MSC) and MSC as a well-known and straightforwardapproach to describe the densification behavior during sintering. The densification behaviors for each material were ana-lyzed in many respects including apparent activation energy, densification parameter, and densification ratio. MSC witha minimal set of preliminary experiments can make the densification behavior to be characterized and predicted as wellas provide guideline to sinter cycle design. Considering the results of linearized form and MSC, it was confirmed thatthe W-25 wt.%Re compared to Pure Re is more easily densified at the relatively low temperature.