In addition to Korea, various countries such as the United States, the United Kingdom, France, and China are designing small module-type reactors. In particular, a small modular reactor is the power of 300 MWe or less, in which the main equipment constituting the nuclear reactor is integrated into a single container. Depending on the purpose, small modular reactors are being developed to help daily life such as power, heating supply, and seawater desalination, or for power supply such as icebreakers, nuclear submarines, and spacecraft propellants. Small modular reactors are classified according to form. It can be classified into light-water reactors/ pressurized light-water reactors based on technology proven in commercial reactors, and non-lightwater reactors based on fuel and coolant type such as Sodium-cooled Fast Reactor, High temperature gas-cooled reactor, Very high temperature reactor and Moltenn salt reactor. SMRs, which are designed for various purposes, have the biggest difference from commercial nuclear reactors. The size of SMRs is as small as 1/5 of that of the commercial reactors. Several modules may be installed to generate the same power as commercial reactors. Because of the individually operation for each module, load follow is possible. Also, The reactor can be cooled by natural convection because the size is small enough. It is manufactured as a module, the construction period can be reduced. Depending on the characteristics of these SMRs, application for safeguards is considered. There are many things to consider in terms of safeguards. Therefore, it is IAEA inspection or other approaches for SMRs installed and remotely operated in isolated areas, data integrity for remote monitoring equipment to prevent the diversion of nuclear materials, verification method and material accountancy and control for new fuel types and reactors. Since SMR is more compact and technical intensive, safeguards should be considered at the design stage so that safeguards can be efficiently and effectively implemented, which is called the Safeguards by design (SBD) in the IAEA. In this paper, according to the characteristics of SMR, we will analyze the advantages/disadvantages from the point of view of safeguards and explain what should be considered.

글루탐산은 식물의 생장과 발달에 중요한 역할을 하는 필수 아미노산의 전구체이며, 저온 보호 물질로 이어지는 생합성 경로를 자극하여 저온 피해를 줄이는 생물자극제 중 하나이 다. 본 연구에서는 저온 스트레스 조건에서 글루탐산 엽면 처 리가 배추에 미치는 영향을 평가하였다. 글루탐산 2가지 엽면 시비 농도(0 및 10mg·L-1)와 3가지 주/야간 온도 수준(11/－1 °C extremely low, E; 16/4°C moderately low, M; 21/9°C optimal, O)을 결합하여 6개의 처리가 수행되었다. 글루탐산 의 엽면 처리는 정식 후 10일에 1회 살포하고, 글루탐산 처리 직후 온도 처리는 최대 4일 동안 실시하였다. 처리 4일 후, ABA, PA, DPA 및 ABA-GE 함량은 M 처리에서 Glu 0 처리 보다 Glu 10 처리에서 함량이 더 높았다. Glucose 함량은 E 및 Glu 10 처리에서 가장 높은 반면(52.1mg·100g-1 dry weight), fructose 함량은 O 및 Glu 0 처리에서 함량이 가장 높았다 (134.6mg·100g-1 dry weight). GLP, GBS, 4MGBS, GNBS 및 GNS 함량은 E 및 Glu 10 처리에서 모든 처리 중 가장 높았 다(0.72, 2.05, 1.67, 9.40 및 0.85μmol·g-1 dry weight). 처리 2일 후 E 및 Glu 10 처리의 PA와 DPA함량에서 급격한 변화 를 확인하였고, 몇몇 개별 glucosinolate 함량(GLP, GBS, 4MGBS, GNBS 및 GNS)은 저온과 글루탐산 처리에 따라 유 의적 차이를 확인할 수 있었다. 또한, fructose는 glucose 대신 fructan을 에너지원으로 사용하였기 때문에 처리 4일후 E와 M처리에서 O 처리에 비하여 유의적으로 낮은 함량을 보였다. 따라서, 저온과 글루탐산 엽면 처리에 따른 PA, DPA, glucose, fructose 및 개별 glucosinolate 물질들의 변이를 확 인하였지만, 저온과 글루탐산의 효과에 관한 명확한 상관관계를 평가할 수는 없었다. 배추과 작물은 호냉성 채소로서 저 온에 민감하게 반응하지 않고, 대부분 내한성을 가지고 있기 때문으로 판단된다.

Non-destructive estimation of leaf area is a more efficient and convenient method than leaf excision. Thus, several models predicting leaf area have been developed for various horticultural crops. However, there are limited studies on estimating the leaf area of strawberry plants. In this study, we predicted the leaf areas via nonlinear regression analysis using the leaf lengths and widths of three-compound leaves in five domestic strawberry cultivars (‘Arihyang’, ‘Jukhyang’, ‘Keumsil’, ‘Maehyang’, and ‘Seollhyang’). The coefficient of determination (R2) between the actual and estimated leaf areas varied from 0.923 to 0.973. The R2 value varied for each cultivar; thus, leaf area estimation models must be developed for each cultivar. The leaf areas of the three cultivars ‘Jukhyang’, ‘Seolhyang’, and ‘Maehyang’ could be non-destructively predicted using the model developed in this study, as they had R2 values over 0.96. The cultivars ‘Arihyang’ and ‘Geumsil’ had slightly low R2 values, 0.938 and 0.923, respectively. The leaf area estimation model for each cultivar was coded in Python and is provided in this manuscript. The estimation models developed in this study could be used extensively in other strawberry-related studies.

Naturally occurring left ventricular hyperplasia is a rare but lethal disease. There are very few reports of this cardiac disease in captive nonhuman primates. In a colony of Macaca mulatta (Rhesus monkey) at California National Primate Research Center, a large number of rhesus macaques were diagnosed by autopsy with naturally occurring left ventricular hypertrophy without obvious underlying diseases over a 22-year period. The confirmatory diagnosis of ventricular hypertrophy was based on findings of notable left ventricular concentric hypertrophy with reduced left ventricular lumen, which is very similar to human ventricular hypertrophy cases. This report discusses an 11-year-old Macaca fascicularis monkey (Cynomolgus monkey, crab-eating macaque), weighing 2.95 kg, that was presented for enrollment in a pharmacokinetic (PK) study. During the PK experiment, the monkey died following a sudden decrease in percutaneous oxygen saturation and heart rate. Gross and histological examinations of the heart were performed. On gross pathology, the left ventricular wall was thickened, and the chamber lumen was reduced. In histopathological examination using hematoxylin- eosin and Masson-trichrome stains, fibrosis and myocyte disarray were not observed, but an increased cell density, compared to the normal heart, was confirmed. The autopsy results confirmed left ventricular hyperplasia as the major cause of death.

In this study, microstructural characteristics and constituent elements of fiberglass splint and cast are examined using a scanning electron microscope and an energy dispersive X-ray spectrometer. As observed by the scanning electron microscope, fiberglass splint and cast had a porous structure with many bundles of fiberglass textures well assembled. Spaces between bundles of the fiberglass splint are triangular or elliptical shaped and the long-axis diameter is measured at about 1 mm. The thickness of fiber bundles covered with plaster is measured at 600 μm and the diameter of a single strand of fiberglass is up to 10 μm. The thickness of the fiberglass bundle of the fiberglass splint is measured at about 700 μm. Spaces between bundles are formed in the shape of triangles with gentle edges and long-axis diameter of up to 1.4 mm, which is larger than that of the splint. The thickness of a single strand of fiberglass of the plaster-coated cast is 11.5 μm, which is thicker than that of fiberglass of the splint. As a result of analyzing constituent elements of the fiberglass cast and the splint with an energy dispersive X-ray spectrometer, Ca, Si, and Al components are identically detected. This result shows that the fiberglass cast has a smoother surface with hardened plaster than the fiberglass splint. The thickness of the fiberglass bundle and the thickness of a single strand of the fiberglass are also larger than those of the fiberglass splint.

본 연구에서는 토마토 유전자원 49점을 대상으로 엽록소형 광 측정 프로토콜인 Quenching act 2를 이용하여 염류 스트레스 수준을 구분할 수 있는 엽록소형광 매개변수를 선발하기 위해 수행되었다. 염류 스트레스 평가는 3엽기 유묘 단계의 토마토 유전자원 49점을 대상으로, 1일 1회 NaCl 400mM로 저면관수를 처리하였다. 염류 스트레스 처리 4일차에 토마토 유묘의 지상부 생체중, 엽록소 및 프롤린 함량 분석을 실시하였 다. 토마토 유전자원 49점의 지상부 생체중 및 엽록소 함량은 대부분 감소하였으며, 프롤린 함량 증가율은 유전자원 별로 유사하였다. 대표적인 12개의 엽록소형광 매개변수는 염류 스트레스에 노출되는 기간이 길어질수록 증감하는 경향을 보였으며, 염류 스트레스에 노출될수록 Y(NO)는 증가하였다. 본 연구결과에서 유전자원 49점의 광계Ⅱ의 비조절 에너지 소산의 양자 수율[Y(NO)]은 염류 스트레스 하에 차이를 보였으 며, 염류 스트레스에 저항성을 지닌 염류 저항성 유전자원과 염류 스트레스에 감수성 유전자원 간의 차이를 확인할 수 있는 엽록소형광 매개변수로 판단되며, 토마토 유전자원에 대해 염류 스트레스 수준을 평가할 수 있는 보완적인 도구로 활용 가능하다고 판단된다.