In order to satisfy customers, it is important to identify the quality elements that affect customers’ satisfaction. The Kano model has been widely used in identifying multi-dimensional quality attributes in this purpose. However, the model suffers from various shortcomings and limitations, especially those related to survey practices such as the data amount, reply attitude and cost. In this research, a model based on the text sentiment analysis is proposed, which aims to substitute the survey-based data gathering process of Kano models with sentiment analysis. In this model, from the set of opinion text, quality elements for the research are extracted using the morpheme analysis. The opinions’ polarity attributes are evaluated using text sentiment analysis, and those polarity text items are transformed into equivalent Kano survey questions. Replies for the transformed survey questions are generated based on the total score of the original data. Then, the question-reply set is analyzed using both the original Kano evaluation method and the satisfaction index method. The proposed research model has been tested using a large amount of data of public IT service project evaluations. The result shows that it can replace the existing practice and it promises advantages in terms of quality and cost of data gathering. The authors hope that the proposed model of this research may serve as a new quality analysis model for a wide range of areas.

본 연구는 원통형 종이포트 토마토 육묘시 Diniconazole의 처리방법이 도장억제 및 근권발달에 미치는 영향을 검토하기 위하여 수행되었다. 그 결과, 엽면적, LAR, 초장, 충실도, 생체중, RGR 및 R/S 에서 시험구간 유의한 차이를 보였다. 동일한 농도를 처리했을 경우, 근권부와 지상부의 흡수도 차이로 인해 저면관수가 엽면살포에 비해 도장억제에 효과적이었다. 저면관수는 엽면시비의 10분의 1의 농도만으로도, 20~30%정도의 동일한 도장억제 효과를 얻을 수 있었다. 디니코나졸 처리에의한 근권부 반응이 흥미로웠는데, 저면관수시 총근장, 근권부피, 평균 근경 및 근단수가 증가하였다. 특히, 0.3mm 이하의 초미세근이 감소하고 0.3~0.6mm의 세근이 증가하였다. 따라서 원통형 종이포트 육묘시 저면관수를 하는 것이 기존 엽면시비에 비해 사용량이 적으면서도 도장억제 및 근권부 활착률을 높힐 수 있을 것으로 판단된다.

The carbon anode material for lithium-ion battery was prepared by pyrolysis fuel oil and waste polyethylene terephthalate (PET) additive. The pitch was synthesized as a medium material for carbon anode by heat treatment. The waste PET additive improved the softening point and thermal stability of the pitch. La and Lc of the anode material (heat-treated pitch) increased at higher treatment temperature but decreased by waste PET additive. The electric capacity was evaluated based on effects of defective cavity and developed graphite interlayer, respectively. When the La and Lc of the anode material decreased, the electric capacity by cavity increased based on defective graphite structure. Therefore, the addition of waste PET causes the improved capacity by the cavity. The anode material which has a high efficiency (over 95%) and C-rate (95%, 2 C/0.1 C) was obtained by controlling the process of heat treatment and PET addition. The mechanism of lithium-ion insertion was discussed based on effects of defective cavity and developed graphite interlayer.

Changes of gonadal morphology and mRNA expression patterns of vitellogenin were investigated in Siberian sturgeon Acipenser baerii (Chondrostei) during its early gonadal maturation period. Early differentiations and morphological transitions of both ovaries and testes appeared to occur actively until the age of 3 years, however from then on, the maturation patterns to full maturity were largely gender-dependent, in which males showed a faster progression of maturation than did females while females experienced a steady-state progress with a lagged interval before entering the final maturation. Expression of vitellogenin mRNAs are closely correlated with transitional patterns of gonadal appearances. In both females and males, hepatic mRNA levels of vitellogenin exponentially increased in the earliest interval (up to 1-year-old). However, in subsequent periods, vitellogenin expression in females continued to increase with age, whereas in males, the expression stabilized at a younger age. Nevertheless, at the age older than or equal to 7-year-old, fully matured individuals showed a quite low level of vitellogenin expression in both females and males. Collectively, results from this study could be useful as a fundamental guideline to address the gonad maturation of this sturgeon species, which is helpful for making practical decisions about farming practices and management for caviar production on local sturgeon farms.

The present study investigated effects of antifungal and carboxylesterase inoculant on rumen fermentation with different rumen pH. Corn silage was treated without inoculant (CON) and with a mixed Lactobacillus brevis 5M2 and L. buchneri 6M1 (MIX). Rumen fluid was collected from two cannulated Hanwoo heifers before morning feeding (high rumen pH at 6.70) and 3 h after feeding (low rumen pH at 6.20). Dried corn silage was incubated in the rumen buffer (rumen fluid + anaerobic culture medium at 1:2 ratio) for 48 h at 39oC. Eight replications for each treatment were used along with two blanks. Both in a high and a low rumen pH, MIX silages presented higher (p<0.05) the immediately degradable fraction, the potentially degradable fraction, total degradable fraction, and total volatile fatty acid (VFA) than those of CON silages. Incubated corn silages in a low rumen pH presented lower (p<0.05) total degradable fraction, ammonia-N, total VFA (p=0.061), and other VFA profiles except acetate and propionate, than those in a high rumen pH. The present study concluded that application of antifungal and carboxylesterase inoculant on corn silage could improve degradation kinetics and fermentation indices in the rumen with high and low pH conditions.

A forklift accident occurs in the logisitcs center. there are many kinds of accidents such as a casualty accident or a minor accident, etc. there are many other causes of accident, including poor　visibility and habitual operational mistakes The result of the accident is the phenomenon of cutting, falling,　scratching of the product. In the case of minor accidents, workers do not report accidents, so the occurrence of accidents is unknown. The customer receives the goods and then notifies them that they are defective product. After the product is returned, we can see that the forklift accident caused the problem of the product The result of the late response affects the image of the enterprise. In this study, we recognized the need for safety education to prevent accidents and found out which of the education items could raise awareness of safety. As result of the study, disinfection and forklift maneuverability regarding speed were mentioned as the most important items in education.

소나무재선충병의 나무주사는 살선충제를 중심으로 실시되어 왔으며, 매개충인 솔수염하늘소와 북방수염하늘소의 방제는 주로 항공방제나 지상방제를 통하여 이루어졌다. 본 연구에서는 나무주사를 통하여 매개충 (솔수염하늘소)을 방제하기 위한 연구로 Abamectin+Acetamiprid ME, Thiamethoxam DC 약제의 나무주사시 솔수염하늘소의 약효발현농도, 처리 후 기간별 효과(2017년~2018년)를 검토하였다. 실내 발현농도 시험에서는 Acetamiprid, Thiamethoxam LC50 value는 각각 0.102ppm, 0.083ppm 으로 나타 났으며, 야산(포장)에서 Abamectin+Acetamiprid ME, Thiamethoxam DC 처리구의 100.0% 치사 소요일 수는 처리 90일 후 11.0일, 9.4일, 처리 360일 후 11.6일, 10.0일로 나타나서 두 약제 모두 3월 처리시 다음해에 발생하는 매개충 (솔수염하늘소) 방제까지 가능함을 확인 할 수 있었다.

The Semi-Rigid Pavement (SRP) mixture is composed of Gap Graded Asphalt (GGA) mixture (air void = 20~28%) and cement paste. By inserting cement paste into voids in GGA mixture, SRP can provide not only flexibility but also rigidity characteristics on pavement performance. SRP can mitigate pavement surface temperature increase during summer session, provide better smoothness and mitigate rutting distress due to heavy weight vehicles, successfully. In Japan, SRP is widely applied in cross section area, heavy vehicle parking lot and highway ticketing booth in highway network system. In South Korea, SRP was introduced and applied since 2005. However, still more researches and studies are needed to understand material characteristics and improve performance of SRP. Moreover, the current SRP system in South Korea merely follows and adapts the aggregate gradation information from Japan which needs to be amended and customized into original material (i.e. aggregate, binder and cement) situation of South Korea. In this paper, SRP system based on Stone Mastic Asphalt (SMA) mixture design originated from Korea Expressway Corporation (KEC) and enhanced cement paste with addition of fly-ash and slags was developed. In addition, an optimized proportion between asphalt mixture air voids and cement paste amount with consideration of economic benefit was introduced. Based on field evaluation process it can be said that the newly developed SRP system can successfully adapted not only in static site on highway: parking lots or ticketing booth, but also in dynamic site on highway: driving and wheel path.

In case of performing asphalt pavement overlay on existing concrete pavement layer, applying asphalt emulsion tack-coating or spreading prime-coating is considered to improve adhesion between asphalt and concrete layer. After coating work is done a curing process is considered not only for promoting evaporation process in coated (and/or spread) asphalt emulsion, but also for generating a membrane which can act as a bonding agent. Finally, asphalt overlay construction is performed when this curing process is completely done. However, during asphalt overlay construction process remarkable amount of spread tack-coating layer is lost due to asphalt material transfer vehicles (e.g. trucks, approximately 40~50% of total spread tack coating material is lost). In this paper, a new pavement equipment contains simultaneous asphalt emulsion spreading ability and corresponding construction techniques are introduced. Through applying this equipment, non-stop two step sequent working process: spreading asphalt emulsion on to existing concrete pavement layer then paving asphalt material for overlay construction, is available. During pavement working process temperature of asphalt material was kept with ranged between 130ºC and 170ºC. After performing field performance evaluation, it was found that crucial improvement in pavement layer adhesion, crack and rutting resistant ability were observed compared to the conventional paving method.

To obtain information on the sanitary of indoor environment in greenhouses used for shiitake cultivation, bacteria associated with larvae and imagoes of Sciaridae flies, pest to shiitake mushroom, were isolated and identified. A total of 1,048 bacterial colonies were isolated from the flies’ larvae and 984 bacterial colonies were isolated from the flies’ imagoes. Based on molecular analysis of the 16S rDNA sequence, Achromobacter xylosoxidans and Tetrathiobacter kashmirensis of β-proteobacteria, Enterobacter asburiae and Raoultella ornithinolytica of γ -proteobacteria, Curtobacterium sp. and Microbacterium thalassium of Actinobacteria, and Penibacillus taichungensis of Firmicutes were identified from the colonies of the flies’ larvae. While, Bacillus megaterium, B. thuringiensis, Lysinbacillus sphaericus and L. fusifomis of Firmicutes, Microbacterium thalassium and Citricoccus parietis of Actinobacteria, and Enterobacter asburiae of γ-proteobacteria were identified from the flies’ imagoes. Some of the isolated bacterial species were known be human pathogens. Overall, the results of this study suggested that mushroom fly carrying human pathogenic bacteria is one of sources impact on the sanitary of indoor environment of greenhouses used for shiitake cultivation.