When a fire breaks out in a distribution center, it causes a lot of damage. And the most casualties are caused by Fire accidents. Therefore, training for fire prevention should be mandatory at the distribution center. Also, the contents of education should be different in room temperature warehouses and low temperature warehouses. Fire education in low-temperature warehouses should be more emphasized. This is because many fires occur in low-temperature warehouses. In this study, a study was conducted to determine the important order of training hours and contents for fire prevention education according to the type of distribution center. The importance of time and content for safety education in all types of warehouses did not differ significantly. It was first decided that safety prevention training should be conducted periodically in all types of warehouses

APro, a process-based total system performance assessment (TSPA) tool for a geological disposal system, has a framework for simulating the radionuclide transport affected by thermal, hydraulic, mechanical or geochemical changes occurred in the disposal system. APro aims to be applied for the TSPA to long-term (> 100,000) evolution scenarios in real-world repository having more than 10,000 boreholes. In this large-scale TSPA, it is important not only to develop a high-performance numerical approach, but also to apply an efficient post-processing approach to massive spatiotemporal data. The post-processing refers to validating numerical analysis results, analyzing and evaluating target systems through data processing or visualization. Since APro uses COMSOL interface, the postprocessing function in COMSOL can be used. However, when the data size increases due to largescale numerical analysis, the time for the COMSOL post-processing increases, resulting in a problem that the analysis and evaluation are not performed effectively. In this case, it is possible to extract necessary data using the COMSOL exporting function and importing it into an external postprocessing program for the analysis and evaluation. In this study, the efficiency of external post-processing with extracted data from COMSOL was reviewed. And, we derived a proper data extraction approach (format and structure) that can increase efficiency of external post-processing.

This paper proposes the optimal molecular weight for a petroleum-based binder pitch to enhance the density and strength of the prepared graphite block. The effect of the molecular weight on the binder properties, which was quantified using solvent fractionation, was considered based on the evaluation of the coking and viscosity characteristics. The affinity of the pitch to coke influenced the carbonization yield of the block, and the proportion of closed pores was reduced via the use of a highaffinity binder pitch. In addition, the viscosity was found to influence the uniformity of the coke and pitch dispersions, and numerous open pores were formed in the graphite block under high-viscosity conditions. In terms of the molecular weight, a reduction in the content of the insoluble 1-methyl-2-pyrrolidone (NMP) fraction, which was the heaviest fraction present in the pitch, was found to reduce the affinity of the binder to coke while increasing its viscosity. Therefore, the density and strength of the prepared graphite block were reduced upon increasing the insoluble NMP content of the binder pitch. Consequently, it was necessary to control the content of this fraction within < 13.81 wt% to obtain high-density and high-strength graphite blocks.

강원특별자치도 18개 시군을 대상으로 감나무와 콩에 발생하는 미국선녀벌레, 썩덩나무노린재, 담배거세미 나방의 발생을 조사하였다. 돌발해충인 미국선녀벌레는 약충기인 6월과 성충기인 10월에 발생조사를 진행하고 남방계해충인 담배거세미나방과 썩덩나무노린재는 7월과 9월 콩 재배기에 발생조사를 진행하였다. 미국선녀 벌레는 강원지역에 있는 감나무에서 발생을 확인할 수 없었고. 감나무 주변 기타 수목에서 가지당 평균 6.7마리 발생하였다. 담배거세미나방은 7월, 속초를 제외한 모든 시군에서 발생이 되었으며, 춘천, 횡성에서 트랩당 60마 리가 넘는 발생밀도를 보였으며, 원주, 강릉, 화천 등 에서는 트랩당 1마리로 낮은 발생밀도를 나타냈다. 썩덩나무 노린재는 7월 춘천, 속초, 홍천 등 7개 시군을 제외한 11개 시군에서 트랩에 포획되는 것을 확인하였으며, 화천에 서 트랩당 26마리로 최고발생밀도를 보였다.

Since 2024, small business are also going to be ruled under the Serious Accident Punishment Act. As the scope of the law expands, the small logistics companies are required to pay more attention on preventing serious accidents on the field. Freight vehicle accidents can cause personnel accidents and cargo accidents which are the two serious accidents that the Serious Accident Punishment Act is trying to prevent. The purpose of this research are to study the factors that cause the serious accidents that happens in the small logistics companies and to suggest preventive. The results of the study shows that fall prevention is the top-priority and then driving experience, safety management, and cargo driving hours. However, the gaps between the evaluation values of each are not huge, which means all the preventives are significant.

Ensuring the safe arrival of delivery cargo at its intended destination is of utmost importance. Truck drivers play a crucial role in guaranteeing the secure delivery of cargo without any mishaps. However, there are various factors that may lead to delayed arrival of trucks at their destination, such as late departures or prolonged loading operations. The timely departure of cargo transportation is contingent upon several variables, including the driver's experience, cargo volume, and loading time. If the transportation commencement is delayed, it may increase the risk of accidents due to an elevated operating speed. Consequently, we conducted a study to investigate the correlation between cargo loading time, cargo volume, driving experience, and the likelihood of accidents. Our findings indicate that both cargo volume and driver experience can impact the likelihood of vehicle accidents. Furthermore, all factors can have an interactive effect on the occurrence of accidents. However, extending the loading time may mitigate the impact on the likelihood of accidents.

The delivery truck is traveled around the delivery area for a long time. Truck drivers cause traffic accidents because of long hours of driving, fatigue, and speeding, etc. In this study, we will test the factors for preventing accidents of drivers. We would like to find factors that affect accidents and improve that can prevent accidents. As in the results of the study, accidents occur when traffic increases and profits increase among driver age, career, and profit factors. In addition, if the volume of traffic increases during the season, the number of accidents increases further. Therefore, in order to prevent truck accidents, a stable cargo quantity must be allocated to truck and cargo must be delivered.

The most important thing in development of a process-based TSPA (Total System Performance Assessment) tool for large-scale disposal systems (like APro) is to use efficient numerical analysis methods for the large-scale problems. When analyzing the borehole in which the most diverse physical phenomena occur in connection with each other, the finest mesh in the system is applied to increase the analysis accuracy. Since thousands of such boreholes would be placed in the future disposal system, the numerical analysis for the system becomes significantly slower, or even impossible due to the memory problem in cases. In this study, we propose a tractable approach, so called global-local iterative analysis method, to solve the large-scale process-based TSPA problem numerically. The global-local iterative analysis method goes through the following process: 1) By applying a coarse mesh to the borehole area the size of the problem of global domain (entire disposal system) is reduced and the numerical analysis is performed for the global domain. 2) Solutions in previous step are used as a boundary condition of the problem of local domain (a unit space containing one borehole and little part of rock), the fine mesh is applied to the borehole area, and the numerical analysis is performed for each local domain. 3) Solutions in previous step are used as boundary conditions of boreholes in the problem of global domain and the numerical analysis is performed for the global domain. 4) steps 2) and 3) are repeated. The solution derived by the global-local iterative analysis method is expected to be closer to the solution derived by the numerical analysis of the global problem applying the fine mesh to boreholes. In addition, since local problems become independent problems the parallel computing can be introduced to increase calculation efficiency. This study analyzes the numerical error of the globallocal iterative analysis method and evaluates the number of iterations in which the solution satisfies the convergence criteria. And increasing computational efficiency from the parallel computing using HPC system is also analyzed.

Rack is a place to store products. Workers pick products from rack storage. After picking up, workers move to another location by forklift. Driving speed, worker condition, and number/frequency of operation is responsible for forklift accidents. When an accident occurs, products get damaged. Therefore, it is important to prevent one. As the research result, To prevent forklift accidents, the minimum order quantity, the minimum number of operations, and low speed operation are required.

When picking up cargo, workers manually load and unload the cargo. Workers have different intensity of work depending on the amount and weight of cargo. In particular, as the intensity of manual work increases, workers are exposed to cumulative traumatic diseases. A manual for picking safety work for workers cargo handling in the distribution center is required. In this study, the worker’s picking safety work based on the cargo volume and weight was presented as an experimental design model. Like the research results, the disease begins when the worker feels the number of pains presented by the model.

APro, developed by KAERI as a process-based total system performance assessment model, can simulate the radionuclide transport affected by thermal, hydraulic, mechanical and geochemical changes that may occurs in the engineering and natural barriers of a geological disposal system. APro targets a large-scale and heterogeneous 3D system that includes more than 10,000 boreholes located about 500 m underground and hundreds of fractures of different sizes distributed within an area of several km2. Simulating transport and reaction phenomena for such a system through the global implicit approach (GIA) may require considerable computational resources or be intractable in some cases. Therefore, APro adopts the sequential non-iterative approach (SNIA), one of the operator splitting (OS) methods, to separate the mass transport and reaction phenomena into independent problems. By using SNIA, the parallel computation performance in APro with multiple cores is expected to be improved. In this study, the effect of SNIA on the parallel computation performance was analyzed through a simple 1D reactive transport problem. Without SNIA, finite difference equations, discretized from the partial differential equations (PDEs) describing the reactive transport problem, have to be solved at once because all dependent variables are nonlinearly and spatially interconnected through reaction and mass transport terms. When the reaction and mass transport terms are separated through SNIA, the mass transport problem can be converted into independent linear equations for each chemical and the efficient linear system solver can be applied to each linear equation. In particular, since the reaction problem is changed to independent nonlinear equations for each node, the parallel computation performance can be greatly improved. To verify this, the 1D reactive transport problem was implemented in MATLAB, and SNIA and GIA were applied to solve the problem. As a result, there was no significant difference in results between SNIA and GIA for proper spatial and temporal discretization, which verified the accuracy of SNIA. In order to see the parallel computation performance, the calculation times for SNIA and GIA with increasing number of cores were measured and compared. As the number of cores increased, the SNIA calculation speed became faster than that of GIA, which verified that SNIA could improve parallel computation performance in APro. In the future, the effect of SNIA on the parallel computation performance will be verified for the numerical analysis of large-scale geological disposal systems.

Large earthquakes with (MW > ~ 6) result in ground shaking, surface ruptures, and permanent deformation with displacement. The earthquakes would damage important facilities and infrastructure such as large industrial establishments, nuclear power plants, and waste disposal sites. In particular, earthquake ruptures associated with large earthquakes can affect geological and engineered barriers such as deep geological repositories that are used for storing hazardous radioactive wastes. Earthquake-driven faults and surface ruptures exhibit various fault zone structural characteristics such as direction of earthquake propagation and rupture and asymmetric displacement patterns. Therefore, estimating the respect distances and hazardous areas has been challenging. We propose that considering multiple parameters, such as fault types, distribution, scale, activity, linkage patterns, damage zones, and respect distances, enable accurate identification of the sites for deep geological repositories and important facilities. This information would enable earthquake hazard assessment and lower earthquakeresulted hazards in potential earthquake-prone areas.

The　possibility of developing musculoskeletal disorders increases with the length of service of the worker. Musculoskeletal disorders can occur when performing repetitive and forceful movements. Therefore, Cargo drivers operate repeatedly in the wrong posture for a long time. When loading and unloading a cargo, the cargo driver works repeatedly with force. Cargo operators are also exposed to musculoskeletal disorders in the working environment due to poor posture and repetitive movements. In this study, we are going to conduct a study on the level of awareness and prevention of the possibility of musculoskeletal disorders in cargo drivers for long periods of time. As a result of the study, the factors that cause musculoskeletal disorders in each group can occur during the long-term operation and preparation of drivers.

Celecoxib, a cyclooxygenase (COX)-2 selective inhibitor, was approved as a non-steroidal anti-inflammatory drug (NSAID), and this therapeutic application has been expanded to several other diseases, including colon cancer. Notably, a treatment strategy combining the use of celecoxib and radiation therapy has been employed for improving the control of local cancers. In this study, we examined the effect of celecoxib on irradiation-induced intestinal damage. The twenty four mice (BALB/c) were divided into four groups; 1) sham-irradiated control group, 2) celecoxib-treated group, 3) irradiated group, and 4) celecoxib-treated irradiation group. Mice were orally administered celecoxib at a dose of 25 mg/kg in a 0.1 mL volume, daily for 4 days after irradiation exposure (10 Gy). Then, histological examinations of the jejunal villous height, crypt survival, and crypt size were performed. The expression of COX-2 after administration of celecoxib in irradiated mice was examined by employing immunohistochemistry, Western blotting, and qPCR analysis. The jejunal villi height and the crypt survival were reduced in the irradiation group compared with the sham-irradiated group. Celecoxib treatment in irradiation mice even more decreased those indicators. Crypt size was increased in the radiation group compared to the sham-irradiated control group, whereas the size was decreased in the celecoxibtreated irradiation group compared with the group exposed to the radiation injury. COX-2 expression was detected in the crypt of the small intestine, and COX-2 expression was increased in the crypt lesion following radiation exposure. However, COX-2 expression was reduced in the celecoxib-treated irradiation group. Therefore, in the present study, we confirmed that celecoxib treatment after irradiation aggravated the irradiation-induced intestinal damage. These results suggest that a caution need to be administered when celecoxib treatment is performed in combination with radiation therapy for cancer treatment.

혁신은 특히 신흥국가 시장에 속한 기업들에게 도전적인 일이다. 5% 이상 지분을 소유한 소위 블록 기관투자자는 기업 혁신에 있어 중요한 역할을 맡고 있다. 본 연구는 중국 증시에 상장된 기 업들을 표본으로 블록 기관투자자들이 기업혁신의 성과에 미치는 영향을 분석하였다. 주요 연구자 료로서 기업이 허가받은 발명 특허의 건수를 사용하여 기업혁신의 성과를 측정하였다. 2007년부터 2016년까지 1,126개 중국 기업의 패널 데이터를 사용하여 분석한 결과, 블록 기관투자자는 기업 경영에 대해 적극적인 모니터링을 수행하며, 경영진의 커리어 우려를 해소시킴으로써 기업의 혁신 성과에 긍정적인 영향을 미치고 있음을 발견하였다. 어떤 유형의 블록 기관투자자가 보다 유의한 영향을 미치는지를 분석하기 위하여 기관투자자의 국적과 투자기간에 따라 블록 기관투자자를 국 내 블록 기관투자자와 해외 블록 기관투자자, 그리고 장기적 블록 기관투자자와 단기적 블록 기관 투자자로 구분하였다. 실증분석 결과, 국내 및 해외의 블록 기관투자자는 모두 중국기업의 혁신 성 과에 유의하게 긍정적인 영향을 미치고 있었다. 특히 해외의 장기적인 블록 기관투자자의 긍정적인 영향이 가장 크게 나타났다. 반면에 단기적인 블록 기관투자자가 혁신 성과에 미치는 영향은 통계 적으로 유의하지 않았다. 이런 분석 결과들은 강건성 테스트에서도 일치하게 나타났다.

Continuous synthesis of high-crystalline carbon nanotubes (CNTs) is achieved by reconfiguring the injection part in the reactor that is used in the floating catalyst chemical vapor deposition (FC-CVD) process. The degree of gas mixing is divided into three cases by adjusting the configuration of the injection part: Case 1: most-delayed gas mixing (reference experiment), Case 2: earlier gas mixing than Case 1, Case 3: earliest gas mixing. The optimal synthesis condition is obtained using design of experiment (DOE) in the design of Case 1, and then is applied to the other cases to compare the synthesis results. In all cases, the experiments are performed by varying the timing of gas mixing while keeping the synthesis conditions constant. Production rate (Case 1: 0.63 mg/min, Case 2: 0.68 mg/min, Case 3: 1.29 mg/min) and carbon content (Case 1: 39.6 wt%, Case 2: 57.1 wt%, Case 3: 71.6 wt%) increase as the gas-mixing level increases. The amount of by-products decreases stepwise as the gas-mixing level increases. The IG/ID ratio increases by a factor of 7 from 10.3 (Case 1) to 71.7 (Case 3) as the gas-mixing level increases; a high ratio indicates high-crystalline CNTs. The radial breathing mode (RBM) peak of Raman spectrograph is the narrowest and sharpest in Case 3; this result suggests that the diameter of the synthesized CNTs is the most uniform in Case 3. This study demonstrates the importance of configuration of the injection part of the reactor for CNT synthesis using FC-CVD.