The occurrence of exotic weeds and their influx into farmlands due to climate change poses many problems. Therefore, it is necessary to generate a prediction model for the occurrence pattern of these exotic weeds based on scientific evidence and devise prevention measures. The photosynthetic apparatus is known as the most temperaturesensitive component of a plant cell and its initial response to temperature stress is to inhibit the activation of photosystem II. This study investigated the potential of OJIP transients in assessing temperature stress in exotic weeds. The four exotic weeds currently flowing into Korean farmlands include Amaranthus spinosus, Conyza bonariensis, Crassocephalum crepidioides, and Amaranthus viridis. These weeds were treated at 5°C, 10°C, 15°C, 20°C, 25°C, 30°C, 35°C, and 40°C and the OJIP curves and JIP parameters were measured and analyzed. The results showed that heat and chilling stress affected the photosystem II (PSII) electron transport of A. spinosus, whereas C. crepidioides and A. viridis were more affected by high-temperature stress than by low-temperature stress. Lastly, C. bonariensis showed resistance to both high and low-temperature stress. The results of this study suggest that OJIP transients and JIP parameters can be used to analyze damage to the photosynthetic apparatus by temperature stress and that they can serve as sensitive indicators for the occurrence pattern of exotic weeds.

본 실험은 장미의 삽목시 증산억제제와 생장억제제를 활용 하여 미스트나 밀폐시설 없이 삽목발근 효율을 증가시킬 목적으로 수행하였다. 절화장미 ‘M-Red’ 줄기 삽목 후 증산억제제 ‘Wilt Pruf’ 및 ‘Cloud Cover’ 1, 2, 4, 8%와 생장억제제 paclobutrazole 10, 20, 40, 80mg･L-1, diniconazole 100, 200, 400, 800mg･L-1를 각각 엽면살포 하였다. 증산억제제의 효과 는 종류에 따라 달랐는데, Wilt Pruf는 생존율, 신초 발생율, 발근율을 모두 향상시켰으나 신초수, 뿌리수, 뿌리길이에는 영향을 미치지 않았다. Cloud Cover는 생존율과 발근율을 향상시키는 효과가 없었으나 신초 발생율이 처리농도와 비례하여 높아져 4, 8% 처리시 가장 높게 나타났다. 생장억제제 처리효과도 종류에 따라 달라 paclobutrazol은 생존율과 발근율 향상에 영향을 미치지 않았으나 신초 발생율을 높였으며 1% 처리시에 신초발생이 가장 높았다가 농도가 높아지면서 낮아졌다. Diniconazole은 100, 200mg･L-1 처리시 생존율과 발근율을 향상시켰으나 800mg･L-1의 고농도에서는 생존율과 발근율 모두 낮게 나타났다.

Cu/PET composite films are widely used in a variety of wearable electronics. Lifetime of the electronics is determined by adhesion between the Cu film and the PET substrate. The formation of an anisotropic nanostructure on the PET surface by surface modification can enhance Cu/PET interfacial adhesion. The shape and size of the anisotropic nanostructures of the PET surface can be controlled by varying the surface modification conditions. In this work, the effect of Cu/PET interface nanostructures on the failure mechanism of a Cu/PET flexible composite film is studied. From observation of the morphologies of the anisotropic nanostructures on plasma-treated PET surfaces, and cross-sections and surfaces of the fractured specimens, the Cu/PET interface area and nanostructure width are analyzed and the failure mechanism of the Cu/PET film is investigated. It is found that the failure mechanism of the Cu/PET flexible composite film depends on the shape and size of the plasmatreated PET surface nanostructures. Cu/PET interface nanostructures with maximal peel strength exhibit multiple craze-crack propagation behavior, while smaller or larger interface nanostructures exhibit single-path craze-crack propagation behavior.

In this study, we investigated the relationships between benthic macroinvertebrate assemblages and various environmental factors in Iancheon (NIA) and Bukcheon (NBC) streams, Korea. We collected benthic macroinvertebrates and 33 environmental factors in April 2017 at 9 sites (5 sites in NIA and 4 sites in NBC). We identified 93 species (5 phyla, 9 classes, 16 orders, and 53 families) and 69 species (5 phyla, 9 classes, 17 orders, and 47 families) in NIA and NBC streams, respectively. Considering benthic macroinvertebrate index (BMI), NIA (88.2) and NBC (80.2) streams were in “very good” status. Upstream areas showed the highest scores, 95.5 (NIA1) and 94.2 (NBC1), whereas BMI score was the lowest in downstream areas of both streams, especially in NBC4 (51.0 “bad” status). Cluster analysis and non-metric multidimensional scaling analysis represented the differences of benthic macroinvertebrate assemblages according to spatial and anthropogenic gradients. Our findings provide reference data and highlight the need for the continued monitoring to maintain the good status and manage macroinvertebrate diversity in these two streams, in Sangju-si, Korea.

본 연구는 제비동자꽃의 대량번식을 위한 효과적인 발아 조건을 선발하고자 수행되었다. 제비동자꽃 종자는 저온습윤 처리(5°C, 0, 4, 8, 12, 16주), GA3 처리(0, 500, 1000mg･L-1), 프라이밍 처리(0.1M, 0.2M의 NH4NO3, K2HPO4, KCl, KNO3)를 하였다. 모든 종자는 25°C, 12시간 광조건(40μmol･m-2 ･s-1)에 서 발아 실험이 진행되었으며, GA3 처리구는 비닐온실(평균 23.4°C)에서도 비교실험이 진행되었다. 저온습윤 8주 처리구 에서 20.4%로 가장 높은 발아율을 나타냈으며, 12주 이상의 저온습윤 처리는 오히려 제비동자꽃의 발아율을 감소시켰다. GA3 0, 500, 1000mg･L-1 처리된 종자는 25°C에서 각각 3.3, 44.0, 62.0%, 비닐온실에서 각각 5.3, 16.7, 42% 발아하였다. 제비동자꽃 종자는 GA3 농도가 높아질수록 발아율이 증가하였다. 또한 제비동자꽃 종자는 0.2M KNO3-프라이밍 처리구에서 가장 높은 발아율(54.7%)을 나타냈으며, 평균발아소요일수는 처리 간 유의성을 보이지 않았다. 이상의 결과로 효과적인 제비종자꽃 종자 번식을 위한 전처리 조건으로 24시간 GA3 1000mg･L-1 침지 처리 또는 0.2M-KNO3 프라이밍 처리를 추천한다.