There are many types of foam molding methods. The most commonly used methods are the pressure foaming method, in which foam resin is mixed with a foaming agent at high temperature and high pressure, and the normal pressure foaming method, which foams at high temperature without pressure. The polymer resins used for foaming have different viscosities. For foaming under normal pressure, they need to be designed and analyzed for optimal foaming conditions, to obtain resins with low melt-viscosity or a narrow optimal viscosity range. This study investigated how changes in viscosity, molding temperature, and cross-link foaming conditions affected the characteristics of the molded foam, prepared by blending rubber polymer with biodegradable resin. The morphologies of cross sections and the cell structures of the normal pressure foam were investigated by SEM analysis. Properties were also studied according to cross-link/foaming conditions and torque. Also, the correlation between foaming characteristics was studied by analyzing tensile strength and elongation, which are mechanical properties of foaming composites.

본 연구는 원통형 종이포트 토마토 육묘시 Diniconazole의 처리방법이 도장억제 및 근권발달에 미치는 영향을 검토하기 위하여 수행되었다. 그 결과, 엽면적, LAR, 초장, 충실도, 생체중, RGR 및 R/S 에서 시험구간 유의한 차이를 보였다. 동일한 농도를 처리했을 경우, 근권부와 지상부의 흡수도 차이로 인해 저면관수가 엽면살포에 비해 도장억제에 효과적이었다. 저면관수는 엽면시비의 10분의 1의 농도만으로도, 20~30%정도의 동일한 도장억제 효과를 얻을 수 있었다. 디니코나졸 처리에의한 근권부 반응이 흥미로웠는데, 저면관수시 총근장, 근권부피, 평균 근경 및 근단수가 증가하였다. 특히, 0.3mm 이하의 초미세근이 감소하고 0.3~0.6mm의 세근이 증가하였다. 따라서 원통형 종이포트 육묘시 저면관수를 하는 것이 기존 엽면시비에 비해 사용량이 적으면서도 도장억제 및 근권부 활착률을 높힐 수 있을 것으로 판단된다.

In the present study, lichen(Parmelia sp.) extract showed insecticidal activity against Aedes albopictus, and the effect of growth inhibiting activity was investigated. Acetone and methanol extracts of the lichen against larvae of Aedes albopictus were showed high insecticidal activities in low lethal concentration. 50% lethal concentration of the acetone extractof the lichen is 0.13% and the 50% lethal concentration of methanol extract of lichen is 0.15% respectively. This experiment that used acetone and methanol extracts of the lichen were observed for 24, 48 and 72 hours. As a result, the higher concentration and the longer exposure time is increased mortality against Aedes albopictus. Pupation time took more time as the higher concentration of acetone extract of lichen. Consequently, the lichen extract is effect in inhibiting the growth of Aedes albopictus larvae. In this experiment indicates that lichen extract has activity against Aedes albopictus and is available as the natural insecticide.

Cloned calves derived from somatic cell nuclear transfer (SCNT) have been frequently lost by sudden death at 1 to 3 month following healthy birth. To address whether placental anomalies are responsible for the sudden death of cloned calves, we compared protein patterns of 2 placentae derived from SCNT of Korean Native calves died suddenly at two months after birth and those of 2 normal placentae obtained from AI fetuses. Placental proteins were separated using 2-Dimensional gel electrophoresis. Approximately 800 spots were detected in placental 2-D gel stained with coomassie-blue. Then, image analysis of Malanie III (Swiss Institute for Bioinformatics) was performed to detect variations in protein spots between normal and SCNT placentae. In the comparison of normal and SCNT samples, 8 spots were identified to be up-regulated proteins and 24 spots to be down-regulated proteins in SCNT placentae, among which proteins were high mobility group protein HMG1, apolipoprotein A-1 precursor, bactenecin 1, tropomyosin beta chain, H+-transporting ATPase, carbonic anhydrase II, peroxiredoxin 2, tyrosine-rich acidic matrix protein, serum albumin precursor and cathepsin D. These results suggested that the sudden death of cloned calves might be related to abnormal protein expression in placenta.

Advanced multidetector CT (MDCT) technology provides 2-dimensional (2D) images with 3-dimensional (3D) images. These 3D images (volume rendered, VR images) demonstrates the surface of the body and cutaneous neurofibromas in pa-tients with neurofibromatosis (NF) are well visualized. MDCT is a very useful imaging modality that represents various findings of neurofibromatosis such as cutaneous neurofibromas, central nervous tumors, skeletal anomalies including verte-bral scalloping and dural ectasia, mediastinal masses, lung parenchymal diseases, vascular anomalies, and complicated dis-eases related with NF. Herein, we report three cases with NF presenting cutaneous neurofibromas diagnosed by MDCT; One is NF patient with dural ectasis and meningocele, second case is a patient with NF and horseshoe kidney, third case is a pa-tient with cutaneous and subcutaneous neurofibromas.

Background : The most problematic disease in Boxthorn is Anthracnose. New variety with Anthracnose-resistant is good for high yield and Safe fruit production in open field. Therefore it is necessary to develop a New variety with Anthracnose -resistant and high yield. Methods and Results : The new boxthorn line, CB10511-104 was selected from the cross between Cheongun (IT232599) and CB08456-113 to breed new variety with high yield and Anthracnose-resistant in 2011. Its preliminary yield test was performed from 2012 to 2013 and the selected line was named Cheongyang 25. Its regional yield trials were carried out in Cheongyang, Yesan and Jindo for 3 years, from 2014 to 2016. Cheongyang 25 was registered as the new variety, Cheonggeum, in 2016. The specific characteristics were summarized as follows; Tree shape is open type and the leaf is round-lanceolate. The flowers are normal size and purple. The fruit is large size, round oval and yellowish red. The flowering was June 19 with medium flowering. Number of sprout branch by pruning was generated more than the check variety, Cheongmeong. The infection rates on leaves to Eriophys macrodonis Keifer was as strong as 39.6 percent. Anthracnose on fruits in open field was slightly similare compared to the check variety, but check variety was Anthracnose-resistant. The content of betaine and free sugar in dried-fruits were higher than that of the check variety. The dried-fruit yield was decreased about 17 percent in open field. Conclusion : This variety ‘Cheonggeum’ was suitable for cultivation in open field because of Anthracnose-resistant. It is necessary the companion variety, Cheonghong, because of self-incompatible.

Compared to wide ranges of genetic variation of natural populations, very limited Miscanthus cultivar has been released. This study was the first report on the development of Miscanthus cultivar by means of radiation breeding. Seeds of M. sinensis were initially exposed to gamma rays of 250 Gy for 24 h, generated from a 60Co gamma-irradiator. The irradiated seeds were sown and then the highly tiller-producing mutants were selected for this study. Biomass-related parameters including tiller number, plant height, stem diameter, and leaf number were measured. Ploidy level and internal transcribed spacer (ITS) were investigated to characterize the mutants compared to wild type (WT) Miscanthus. Plant height and tiller number were negatively related, where multi-tillering mutants were relatively short after 4 month growth. However stem diameter and leaf number were greater in mutants. All the materials used in this study were diploid, implying that the mutants with greater tiller numbers and stem diameter were not likely related to polyploidization. Based on the sequence of ITS regions, the mutants demonstrated base changes from the gamma irradiation where G+C content (%) was decreased in the ITS1, but increased in ITS2 when compared to WT sequence. ITS2 region was more variable than in ITS1 in the mutants, which collectively allows identification of the mutants from WT. Those mutants having enhanced tillers and allelic variations might be used as breeding materials for enhanced biomass-producing Miscanthus cultivars.

This study was carried out to investigate the characteristics of shattering habit and germination of offtype rice plants collected in Korea which were classified into seven groups based on grain characteristics. In the long-grain red rice group, the short-grain red rice group, the long-grain normal rice group, and the long-grain waxy rice group, the tensile strength of grain and primary rachis branch was relatively low and the fiber cell of the primary rachis branch was short. Characteristics of shattering-related traits and germination in relation to grain and esterase isozyme zymogram type of off-type rice plants. In most lines of the extremely late and sterile rice group, the tensile strength of grain was low, while that of primary rachis branch was high, and the fiber cell was long. However, in the type 1 esterase isozyme zymogram(EIZ) lines among the long-grain normal rice group and the type 6 and 5+6 EIZ plants among the extremely late and sterile rice group, the tensile strength of grain was relatively higher. The long-grain waxy rice group and the type 3 EIZ lines among the long-grain red rice group, showed higher germinability than did cultivars which are known to germinate well even in low-temperature. The other off-type rice group, except for the short-grain waxy rice group and type 1 and 7 EIZ lines among the long-grain normal rice group, had higher germination speed than that of the cultivars.