송전철탑의 심형기초 시공 시 안전확보가 매우 중요한데, 무거운 철근을 취급하는 작업자의 중대 재 해 위험이 크고 실제로 심형기초를 위한 철근공 작업자들의 사고가 끊이질 않는 실정이다. GFRP는 철근 이상의 인장강도를 갖도록 제작이 가능하고, 철근에 비해 무게가 가벼워 취급이 용이하며 시공 편이성이 높다는 장점이 있다. 따라서 본 연구에서는 철근을 대체하여 GFRP를 보강근으로 활용한 심 형 기초의 구조설계에 대해 다루었다. 국내 송전철탑 설계기준(가공송전선용 철탑기초 설계기준, DS-1110, 한국전력) 및 ACI440.1R-06 설계기준을 참고하여 GFRP 보강근이 적용된 심형 기초의 구 조검토를 수행하여 GFRP 보강근의 적용성을 검토하였다. 송전철탑의 심형 기초 단면에는 휨모멘트와 축력이 동시에 작용하며 심형기초의 주체부 및 구체부 특성에 따라 축력에 의한 편심모멘트가 추가로 작용한다. 이에 따라 설계 검토는 휨 및 축력이 동시에 작용하는 경우에 대해 수행되었다. 국내 기준 (DS-1110)의 구조검토는 허용응력설계법의 형식을 취하므로 축력과 휨모멘트에 의한 최대응력을 산 정하여 허용응력과 비교하였고, 강도설계법을 통한 구조검토는 보강된 단면의 P-M 상관도를 작도하 여 휨모멘트 및 축력이 동시에 작용하는 경우 구조 안전성 확보 유무를 판단하여 GFRP 보강재를 배 근한 단면의 설계적정성을 판단하였다.

In this study, The recent national interest is focused on the welfare of the people, and new projects in the construction sector are being reduced, and the aging of infrastructure is not getting attention. In domestic case, most of the infrastructures were built in the 1970s to 1980s, and the road extension is also steadily increasing. Therefore, the costs to bridge maintenance from around 2010 by a similar route to that of advanced countries are also 4 times And it is time to pay attention to maintenance as well as construction. Therefore, a study was carried out on the valuation method considering bridge condition evaluation, which is a part of BIM library building and assembly program development. The proposed value evaluation method will be used as an index of the existence of bridges by comparing the cost required for maintenance and reinforcement of the target bridges and the costs required for dismantling and disposal in the bridge management system of the future program

In this study, to develop the basis of damage prediction system for abutment type rigid-frame bridge, measurement data is generated by artificially expressing damage by Abaqus, a commercial structural analysis program, and applied to machine-learning. The rigid-rame bridge structural analysis model is expressed as closely as possible to the actual bridge condition considering the specification, damage expression, analysis method, boundary condition, and load. CNN(Convolutional Neural Network), one of the neural network algorithm, is used for machine-learning and accuracy is confirmed when there was no measurement error as a result of machine learning.

For the purpose of economic growth in the nineteenth century, social infrastructures have been rapidly aging since the 21st century, Currently, many of the existing infrastructure has been aged, and many national costs have been spent on safety Inspection and maintenance. It is expected that more maintenance will be costly in the future, and maintenance cost can be expected to be reduced due to safety inspection and repair and reinforcement measures in a timely manner. The measures provided in the national and international safety inspection and maintenance manual reduce the efficiency of the work by repeating document work. In addition, due to lack of information sharing among practitioners performing inspection and maintenance, it is considered that incomplete work or incurring additional costs will lead to a large national loss. Building Information Modeling (BIM) can manage all the information generated during the whole life cycle of social infrastructures. Domestic institutions are increasing the use of BIM, and the Public Procurement Service is obliged to design BIM. We expect to increase the work efficiency of practitioners by reducing repetitive document work using BIM, It will make the integrated management information enable bi-directional communication among practitioners. First of all, building a library of social infrastructures and standardizing the information classification system and procedures for BIM application should be essential. As a result, standardization studies on standard information classification system and procedures based on representative bridges among social infrastructures were conducted.

Grouted connections have been widely used for offshore structures such as connection method of jacket and mono-pile structures. It is recommended high strength concrete for grouting between pile and sleeve because it is so rapidly hardening that helpful to fatigue strength. This study investigates axial strength of pile to sleeve grouted connections made by 130MPa of high strength concrete. Push-out test were performed to evaluate the axial strength of the grouted connections with different shear-key spacing.

Recently, wind power has received attention as one of remarkable renewable energy resources, and worldwide researches about wind power are actively being proceeded. Wind turbine tower has a major role for safety in the wind turbine systems. It is necessary for design tower structure to consider various environmental conditions. Earthquake, as one of the such environmental loads, is ground motion that applied to bottom of the tower structure and has a possibility of critical effect to the wind tower structure. There are various ways for seismic analysis, but design specifications that are in use do not suggest detailed method for seismic analysis. In this study, seismic responses are analyzed through different ways and the adequacy of seismic design methods is examined.

Based on the study of LOD for BIM when doing structural modeling. Divide and standards LOD criteria And investigates the characteristics of property which have to involve in structural analysis

This study aims to establish complementary relationship among designer, builder, and maintenance manager by combining BIM(Building Information Modeling) technology with bridge safety diagnosis and maintenance to secure its effectiveness and systematization. To establish and maintain database by organizing quantities of data about existing case of safety diagnosis and maintenance, and develop the system to be used by practitioners.

신재생 에너지에 대한 세계적인 관심이 증대됨에 따라 풍력발전시장의 성장 및 대형화 또한 지속적으로 이루어지고 있으며 이에 대한 구조적 특성 분석 및 해석에 대한 연구가 활발히 진행되고 있다. 풍력발전타워의 형식 가운데 가장 많이 이용되고 있는 원형 강관타워는 여타 토목구조물에 비해 상대적으로 간단한 모델로 구성되지만 구조물의 특성 상 불규칙적인 동적하중이 지속적으로 작용하며 이에 대해 적절한 동적 거동 분석이 필요하다. 구조물의 해석에 있어 정밀한 해석모델을 이용한 해석은 간단한 모델의 그것에 비해 정밀한 결과를 보일 수 있지만 상대적으로 많은 노력과 시간을 요구한다. 효율적인 구조해석을 위해 해석에 사용되는 모델은 가능한 한 간단해야 하지만 구조물의 특성을 반영하지 못 할 정도로 지나치게 간소화해서는 안 된다. 원형 강관 풍력발전타워에 대한 구조해석은 쉘 요소 및 보 요소를 통해 많은 연구가 진행되고 있으며 보 요소 모델에 대한 해석의 편의성을 이용한 해석 시 Tapered 쉘 요소를 주로 Stepped-Beam으로 묘사하여 해석에 이용한다. 본 연구에서는 원형 강관 풍력발전타워의 모델링 방법에 따른 동적 거동을 분석하고 간소화 모델에 대한 구조물의 특성 반영정도를 검토하였다.