본 연구는 2020년 10월 중 충청남도내 단체 급식소에서 발생한 대규모 집단 식중독 원인에 대하여 분석하였다. 전 체 급식원 135명 중 21명(15.6%)에서 음식을 섭취한 후 1 시간 이내에 주로 매스꺼움과 구토 증상을 보였다. 유증 상자 21명 중 11명과, 조리종사자 1명, 조리기구 2건과 보 존식 8건에서 B. cereus가 검출됨에 따라 B. cereus에 의 한 집단 식중독으로 판단하였다. 분리된 21개의 균주를 PFGE 분석한 결과, 19개의 균주가 동일한 것으로 판단되 었고, 이들 균주가 가지고 있는 독소 유전자는 CER, nheA, entFM이었다. 실험결과, CER을 포함하고, 증상 발현 시간 이 1시간 이내로 매우 짧아 B. cereus의 구토형 식중독으 로 판단하였다. 집단식중독 원인으로 안전하지 않은 급식 환경과 제대로 관리되지 않은 음식에 의한 것이라 조사되 었다. 이러한 결과는 단체급식에서의 급식환경과 제공되 는 음식이 철저하게 관리되어야 한다는 것을 보여준다. 이 와 더불어 보존식에서 원인 병원체를 찾아내는 것은 식중 독의 원인을 추정하는데 매우 중요하므로, 집단급식소에 서 규정에 맞는 보존식 용기를 이용하여 이를 적정온도에 잘 보관해야한다. 또한 정밀한 식중독 역학조사를 기반으 로 사례를 분석하고 결과를 전파함으로써 유사한 식중독 이 재발하지 않도록 해야 한다.

H13 tool steels are widely used as metallic mold materials due to their high hardness and thermal stability. Recently, many studies are undertaken to satisfy the demands for manufacturing the complex shape of the mold using a 3D printing technique. It is reported that the mechanical properties of 3D printed materials are lower than those of commercial forged alloys owing to micropores. In this study, we investigate the effect of microstructures and defects on mechanical properties in the 3D printed H13 tool steels. H13 tool steel is fabricated using a selective laser melting(SLM) process with a scan speed of 200 mm/ s and a layer thickness of 25 μm. Microstructures are observed and porosities are measured by optical and scanning electron microscopy in the X-, Y-, and Z-directions with various the build heights. Tiny keyhole type pores are observed with a porosity of 0.4%, which shows the lowest porosity in the center region. The measured Vickers hardness is around 550 HV and the yield and tensile strength are 1400 and 1700 MPa, respectively. The tensile properties are predicted using two empirical equations through the measured values of the Vickers hardness. The prediction of tensile strength has high accuracy with the experimental data of the 3D printed H13 tool steel. The effects of porosities and unmelted powders on mechanical properties are also elucidated by the metallic fractography analysis to understand tensile and fracture behavior.

  Nowaday the supply chain competitiveness is emphasized more and more than a company’s own competitiveness. One of the most important processes in import and export is a publication over the Bill of Loading. In the publication of those bills S/R(shipping

One of the most important processes of import and export is a publication over the Bill of Loading. In the publication S/R(Shipping Request) & check B/L for reviewing are circulated among consignors, forwarders, shipping companies and airlines by fax & e-mail. Or there should be expensive an One to One system, like an EDI. Each party has to re-input S/R data to their own systems and check several times. The S/R data are converted digital to analog type and analog to digital repeatedly to check in the process. As the process goes by there can be not only input data errors but also waste of time & cost. ECR(Electronic Character Recognition) is a technology can solve the Problem. Considering the data structure of documents in many systems used ECR samples S/R data from documents written in the digital type. But it is not enough with it only. To make N to N composition in reality more efficient we make a documents hub on the web reengineering the existing process to One to One relation. The ECR documents hub system has given us beneficial effects over a year throughout a field test. I hope this study will be used to build the National Electronic Trade Platform And furthermore in internationality

The purpose of study is finding out priority objects to standardize of a Logistics Information System (LIS) and indicating duties of government and companies. Fundamentally we desire the study to make the good use of basic data for building a national unification of logistics system. First we researched into standardization of LIS, looking for IT(Information Technology) concerned with LIS. We sought eleven assessment indexes out. By using AHP (Analytic Hierarchy Process), analyzing technique, we looked for a priority object to these. To build a national unification of logistics system is impossible by only corporations' efforts. It must needs lots of collaborative efforts between central and local government. By means of whole study we can overcome great problem is making a priority of standardization to build a national unification of logistics system. Therefore we expect many companies to build LIS easily and also wish to progress quickly on logistics tasks.

This experiments was conducted to investigate the influence on the growth of Sorghum × Sudangrass hybrid by use of various organic fertilizer and investigated their productivity, feed value and stock carrying capacity. In the results, the application of fermented poultry manure showed 93.6ton/ha, 19.6ton/ha, 1.12ton/ha, 11.31ton/ha of fresh yield, dry matter yield, crude protein (CP) yield and total digestible nutrients (TDN) yield but there were no significant differences with the application of poultry by-product compost (poultry manure with sawdust) and swine by-product compost (swine manure with sawdust). And the average value of Kcp and Ktdn showed the highest one as 9.45head/ha/yr in the application of fermented poultry manure. However, organic matter content of fermented poultry manure to the lower portion of 32.1% compared to other organic fertilizers could imagine that mineralization of fermented poultry manure was fairly advanced and plant used most of nitrogen in fermented poultry manure, so productivity of Sorghum × Sudangrass hybrid was shown more than other organic fertilizers. If other organic fertilizers use continuous, this difference can be considered to be reduced further. As a result, fermented poultry manure is better than other organic fertilizers in productivity, feed value and stock carrying capacity due to the higher content of mineralizable matters. In addition, mixing poultry manure with cow and swine manure is better choice because cow and swine manure will meet a low organic matter in poultry manure.

This experiment was conducted to investigate the selection of regional double cropping system for production of organic forage in middle part of Korea and investigated their productivity, feed values and stock carrying capacity. The test results proved the Sorghum×Sudangrass hybrid was 10.9 ton ․ ha-1, the one of Rye + Red clover and Rye + Hairy vetch were the highest one as 3.3 ton ․ ha-1 and the relative yield about a Rye is higher in the dry matter yield in the field soil. And as for the relative forage values (RFV), Corn is the most excellent ones as 96.6 but there were no the significant difference between the Sorghum×Sudangrass hybrid of 84.4 and it. The total digestible nutrient (TDN) content in Rye + Hairy vetch is higher than others as 59.7%. As for the relative feed value, Rye + Red clover is the highest one as 83.8 but there was no significant differences between them. As for the ability to raise livestock in the field soil, the average values of KCP and KTDN are shown as 4.27 head/ha/yr in Sorghum×Sudangrass hybrid. As for the same crops, the average values of KCP and KTDN showed the highest ones as 1.74 head/ha/yr, in Rye + Red clover but there were no the significant differences. As for the dry matter yield of the rice field soil, organic rice straw was 3.3 ton ․ ha-1 and Rye + Red clover significantly showed the highest values as 4.1 ton ․ ha-1. In the rice filed soil, the crude protein content of organic rice straw was 3.1% and the TDN content of organic rice straw was 55%. The TDN content in Rye + Red clover was higher than others as 59.7%. As for the relative forage values, Rye + Red clover showed the highest one as 83.8 but there were no significant differences between them. As for the ability to raise livestock in the rice field, the average values of KCP and KTDN in the organic rice straw was 1.04 head/ha/yr and the average values of KCP and KTDNM in Rye + Red clover is the highest one as 1.84 head/ha/yr, but there were no significant differences in all of them.

In attempt to select the most appropriate forage legume species, this study was conducted on the 10 forage legume crops suitable for the central region of Korea and investigated their productivity, feed values and stock carrying capacity. In the results, red clover showed fresh matter yield 38.6 ton/ha, dry matter yield 7.8 ton/ha, crude protein yield 1.0 ton/ha, total digestible nutrients(TDN) yield 4.6 ton/ha, its fresh matter yield, dry matter yield and nutrient yield were significantly(p＜0.05) higher than other species. The value of neutral detergent fiber(NDF) and acid detergent fiber(ADF) were getting higher by the late harvest time then galega and cicer milkvetch were the highest and yellow suckling clover was the lowest value. Relative feed value(RFV) showed good feed values above 100 except cicer milkvetch and galega. In terms of feed grading, yellow suckling clover, yellow blossom sweet clover, crimson clover, hairy vetch were classified into 1st grade, above 151%. The average stock carrying capacity was yet high Kcp(2.18 head/ ha/yr), KTDN(1.25 head/ha/yr) and K(0.04 head/ha/yr). Especially, red clover had the highest stock carrying capacity, Kcp 6.84 head/ha/yr, KTDN 3.64 head/ha/yr and K 0.05 head/ha/yr. According to results, red clover is considered to be the most appropriate crops for the central region, in terms of quality, feed value and stock carrying capacity.