PURPOSES : In this study, a Design Support Automatic Program for NATM (new Austrian tunneling method) tunnels based on BIM that can generate shape information including property information via the development of BIM libraries and the construction of a library design support automatic program is developed. METHODS : In this study, the abovementioned program is developed as an add-in Revit program. AutoDesk's program has the highest utilization rate, and it allows support tools to be added easily. Construction information classification based on WBS(Work Breakdown Structure) is developed. Subsequently, library construction and program development algorithms are developed. RESULTS : The automatic program constructs a library that reflects geometric characteristics through the construction of a library automatic module as well as generates three0-dimensional (3D) shape information by mapping between the constructed library and 3D informal alignment. The proposed program can automatically assemble a constructed library through the development of an algorithm for generating sequences of 3D shape information and automatically place models on a 3D terrain. CONCLUSIONS : The proposed automatic program can be designed and changed easily. It is expected to contribute to improvements in the speed of 3D NATM tunnel modeling and the efficiency of NATM tunnel design.

PURPOSES : In this study, we aimed to develop an absorption and insulation soundproof board with excellent noise reduction ability using waste tire powder. METHODS : An optimum mix ratio of sound absorption material and sound insulation material was derived through a sound absorption test and a compressive strength test; a combustion test was performed to confirm whether the combustibility evaluation criteria were satisfied. Additionally, to derive a shape with excellent noise reduction ability, noise prediction simulation was performed. RESULTS : Through the sound absorption test, compressive strength test, and combustion test, an optimum mix ratio of sound absorption material and sound insulation material as well as a shape with excellent noise reduction ability was derived through noise prediction simulation. CONCLUSIONS : An absorption and insulation soundproof board was applied with sound absorption material and sound insulation material developed using waste tire powder. The recycling rate improved; thus, excellent noise reduction ability can be expected by developing not only materials but also shapes.

최근 농경지 투입양분으로 인한 환경영향의 우려와 함께 하천 등으로 유출되는 양분의 오염부하 관리가 요구되고 있다. 이에 정부는 국내 농지의 양분 과잉 투입 문제를 해결하기 위해 농경지의 양분관리 목표를 설정하여 관리하는 양분관리제도의 도입을 추진하고 있다. 본 연구는 국내 합리적인 양분관리제도 도입을 위한 양분관리 지표 기준을 설정하고자 도 단위의 양분부하와 양분수지 지표를 분석하고 지표별 특성을 비교 검토하였다. 도 단위 질소와 인성분의 양분부하와 양분수지 분석에서 지역별 양분 부하 순위와 양분수지 순위가 다르게 나타나, 지역의 양분 수준을 평가하는데 있어 양분부하와 양분수지의 두 지표는 서로 상이한 지표 값을 도출하는 것으로 나타났다. 양분부하와 양분수지 간의 상관관계 분석에서 질소성분의 경우 상관관계 계수 (r)는 0.2504로서 5% 유의수준에서 통계적 유의성이 없었으며, 인성분의 경우 상관관계 계수 (r) 가 0.7375로서 5% 유의수준에서 통계적 유의성이 인정되었다. 따라서 양분관리 지표활용에 있어 인성분의 경우 양분부하와 양분수지 간의 상호 호환성이 나타났으나, 질소 성분의 경우 양분부하와 양분수지 간의 상호 호환성이 없는 것으로 나타났다. 따라서 지역의 양분관리 지표로서 농업환경 특성을 반영하는 양분수지 지표의 활용이 합리적인 것으로 평가되었다.

본 연구는 수입사료가 우리나라 농업환경의 오염부하에 미치는 영향을 파악하고자 2005년을 기준년도로 하여 수입사료 품목별 수입량 및 비료성분량, 수입사료로 인한 가축 사양단계에서 비료성분 발생량을 추산하고, 농경지 작물별 재배면적과 양분요구도 분석을 통해 수입사료로 인한 농경지의 오염부하도를 분석하였다. 수입사료를 통해 국내로 도입되는 비료성분량은 질소 371천톤, 인산 140천톤, 가리 143천톤, 주요 수입품목인 곡류 및 식물성 유박류에서 유래하는

The purpose of this study was to investigate and analyze continuous operation of food waste resources at Dongdaemun Environmental Resources Center and to improve the overall operation of the dry anaerobic digester facility. Korean domestic food wastes consist of 18% total solid (TS) content but food waste is difficult to utilize for dry anaerobic digestion. Other operational trouble-shooting resulted from the inherent design, construction and operation of such a biomass generation facility based on 100% utilization of dewatered cake with 35% TS concentration as feedstock, causing the accumulation of unwanted solid residues. A materials flow analysis obtained from actual operation of the anaerobic digestion facility revealed that the organic material loading rate (OLR) and its residence time were 8.3 kg-VS/m3·day and 18.3 days, which adversely affected stable operation. The OLR was occasionally > 15,000 mg/L organic acid concentration and the facility shut down. Such anomalies drastically reduced biogas production and increased organic matter loading in the wastewater, which exceeded the legally allowed concentration limit. Operation of this facility has been normalized to the targeted facility capacity of 98 m3/day based on the results of this study.

Based on the general policy called “Green Growth”, the Korean government planed to establish a biomass town in South Korea in order to recover energy from organic waste and to substitute for fossil fuel at rural region. Technical and financial support for the establishment of biomass town was insufficient so far. There are some policies to support biomass town establishment, however financial support from several Korean ministries seemed not to have been used efficiently. Some policies are planned excessively so that they cannot be realized on time. Therefore, there is a need to analyze the status of biomass utilization technology and policy in Japan from the point of view of an external biomass expert, since biomass utilization technology and policy of Japan take good achievement during the many developed countries. For the analyzing of technology and policy in Japan, literatures concerned biomass management policy and biomass town design were collected by visiting Japan Ministry of Agriculture, Forestry and Fisheries and interview of public officials in charge was carried out. There are several implications for the promotion of Korean policy concerned with biomass utilization and biomass town establishment.

This study was carried out to evaluation of biomass generation mechanisms and to propose the estimation method of biomass generation. Agricultural by-product biomass is generated during crops cultivation and after harvest. However these are not uniformly generated yearly and these depending on the seasons. For planning of biomass utilization, accurate information of the biomass resources is needed, especially characteristic and productivity of biomass are necessary. Agricultural by-product biomass are generated in a wide area being scattered and it is one of the major reason why agricultural biomass utilization is not activated compared with other waste biomass. In this study, estimation and evaluation biomass generation is achieved in specific spatial and temporal boundary, A-city in Gyeongi–do and september to November respectively. Quantity and quality of by-product biomass show big difference depending on the crop species and cultivation periods and these difference bring up that accurate biomass estimation should be considered during planning of biomass utilization and technology selecting for biomass converting to energy and other forms.