The elevated temperature compressive tests were carried out in order to investigate the deformation behavior and microstructural characteristics of Al-8%Ti, Al-12%Ti and Al-16%Ti (wt%) alloys, which were mechanically alloyed and consolidated by vacuum hot pressing, A13Ti intermetallic phases were formed with sizes of few hundred nanometers in the mechanically alloyed Al-Ti alloys. The compressive strength of mechanically alloyed AA-Ti alloys increased with decroasing the temperature and with increasing the strain rate. The strain rate sensitivities of Al-8%Ti, Al-12%Ti and Al-16%Ti alloys were measured 0.02,0.03, and 0.14, respectively, at 35.

본 연구에서는 기지금속과의 고상이나 액상의 고용한이 거의 없는 금속-카본(carbon)계에서 고에너지 볼밀공정을 이용하여 고체 윤활 청동베어링용 Cu-C-X계 나노복합금속분말을 제조하고자 하였다. Cu-10wt.%C-5wt.%AI과 Cu-10wt.%C-5wt.%Fe의 혼합분말을 이르곤 분위기의 attritor내에서 기계적 합금화한 후 Cu-C-X의 나노복합금속분말의 미세조직 특성을 조사하였다. AI, Fe를 첨가하였을 때 10시간 이상의 MA공정에서부터 약 10μm이하의 미세한 Cu-C-X나노복합금속분말을 얻을 수 있었으며, MA 시간에 따른 분말의 형상과 미세구조 변화는 금속-금속계의 MA 과정과 유사하게 진행되는 것을 알 수 있었다. Cu-C-X 나노복합금속분말의 X-선 회절시험 결과, MA 시간에 따라 Cu와 C분말의 회절피크의 폭은 넓어지고 회절강도는 감소하였으며, 특히 흑연피크의 MA시간에 따른 소멸은 흑연의 낮은 원자산란계수 때문에 의한 X-선 흡수 영향으로 고찰하였다. Williamson-Hall식으로 계산된 Cu-C-X 나노복합금속분말내의 Cu의 결정립은 15시간 이상의 MA공정에서부터 약 10nm이하의 크기를 가졌으며, TEM 분석결과로는 불규칙한 형상의 약 10-30nm 크기로 복합화된 Cu결정립을 확인할 수 있었다.

It was investigated whether mechanical alloying (MA) processing could be more effective to the formation of metallic composite powder in Cu-C system. Elemental powder mixtures of Cu-70vo1.%C were mechanically alloyed with an attritor in an argon atmosphere and microstructural evolution was examined by X-ray diffraction analysis, scanning electron microscopy and transmission electron microscopy. It has been found that even with the high volume fraction of immiscible graphite in Cu-C system, the refinement with a few ten nanometer size as well as the highly uniform distribution of copper phases have been achieved by the MA processing.

The purpose of this study was to review of animal-assisted therapy. Method: Animal-assisted therapies (AATs) in domestic and international studies (68 cases) were analyzed by searching databases, KERIS & KISS, and the Pub MED(NCBI). Result: In AATs, a few animals were used for the various disease or disorder. Dog centered therapies were most common.. AATs were used in the various disorder and disease. For the psychological effect, majority of the outcome variables were depression and anxiety. For the physical effect, the most outcome variables were blood pressure, heart rate, and stress hormone. However, These results show that AATs were confined to specific areas such as sensation‐centered therapies. Conclusion: AATs had positive effects both in physical and psychological factors even if the study areas have not been applied to the various condition. The further research is needed to identify scientific grounds for the effects of the interventions through various therapies.

Albendazole is the most commonly used medication worldwide for parasitic infestation. Albendazole may induce side effects such as nausea, vomiting, abdominal discomfort, and headache, however hepatotoxicity is rare. A 37-year old woman was admitted to the hospital due to headache. Her child had been repeatedly infected with enterobius vermicularis, therefore she took albendazole three times for prophylactic purposes. The patient was diagnosed with hepatotoxicity induced by Albendazole based on a history of drug use; clinical symptoms and laboratory tests improved after ceasing drug administration, with a Roussel Uclaf Causality Assessment Method (RUCAM) score of 12.