The aim of this study was to investigate the effect of isolated lactic acid bacteria (LAB) on the quality of high moisture rye silage. Rye forage (Secale cereale L.) was harvested at the heading stage (27.3% of dry matter (DM)) and cut into approximately 3-5 cm lengths. Then, the forage divided into 4 treatments with different inoculants: 1) No additives (CON); 2) Lactobacillus brevis strain 100D8 at a 1.2 x 105 colony-forming unit (cfu)/g of fresh forage (LBR); 3) Leuconostoc holzapfelii strain 5H4 at a 1.0 x 105 cfu/g of fresh forage (LHO); and 4) Mixture of LBR and LHO (1:1 ratio) applied at a 1.0 x 105 cfu/g of fresh forage (MIX). About 3 kg of forage from each treatment was ensiled into a 20 L mini-bucket silo in quadruplicate for 100 days. After silo opening, silage was collected for analyses of chemical compositions, in vitro nutrient digestibilities, fermentation characteristics, and microbial enumerations. The CON silage had the highest concentrations of neutral detergent fiber and acid detergent fiber (p = 0.006; p = 0.008) and a lowest in vitro DM digestibility (p < 0.001). The pH was highest in CON silage, while lowest in LBR and MIX silages (p < 0.001). The concentrations of ammonia-N, lactate, and acetate were highest in LBR silage (p = 0.008; p < 0.001; p < 0.001). Propionate and butyrate concentrations were highest in CON silage (p = 0.004; p < 0.001). The LAB and yeast counts were higher in CON and LHO silages compare to LBR and MIX silages (p < 0.001). However, the mold did not detect in all treatments. Therefore, this study could conclude that L. brevis 100D8 and Leu. holzapfelii strain 5H4 can improve the digestibility and anti-fungal activity of high moisture rye silage.

The present study was aimed to estimate the effect of ensiling period and bacterial inoculants on chemical compositions and fermentation characteristics on rye silage harvested at delayed stage. Rye (Secale cereale L.) was harvested after 20 days of heading stage (29.4% dry matter, DM). The harvested rye forage was applied with different inoculants following: applications of distilled water (CON), Lactobacillus brevis (LBB), Leuconostoc holzapfelii (LCH), or mixture of LBB and LCH at 1:1 ratio (MIX). Each forage was ensiled into 20 L mini bucket silo (5 kg) for 50 (E50D) and 100 (E100D) days in triplicates. The E50D silages had higher in vitro digestibilities of DM (IVDMD, p<0.001) and neutral detergent fiber (IVNDFD, p=0.013), and lactate (p=0.009), and acetate (p=0.011) than those of E100D, but lower pH, lactic acid bacteria (LAB), and yeast. By inoculant application, LCH had highest IVDMD and IVNDFD (p<0.05), while MIX had highest lactate and lowest pH (p<0.05). The CON and LCH in E50D had highest LAB and yeast (p<0.05), whereas LBB in E100D had lowest (p<0.05). Therefore, this study concluded that LCH application improved the nutrient digesbility (IVDMD and IVNDFD) of lignified rye silage, and longer ensiling period for 100 days enhanced the fermentation characteristics of silage compared to ensiling for 50 days.

This study was conducted to estimate the effect of different cutting lengths on fermentation characteristics and aerobic stability of whole crop rice (WCR) silage. The WCR was harvested at the yellow ripe stage (43.7%, DM), and then cut at 5 (R05), 10 (R10), and 20 cm (R20) of the theoretical length of cut with no cut WCR (R60). Each forage was ensiled into 20 L mini bucket silo (5 kg) for 150 days in quadruplicates. The cutting lengths were not affected the chemical compositions of WCR silage (p > 0.05). The pH (p < 0.001) and concentration of ammonia-N (p = 0.022) in WCR silage were increased linearly with the increase of cutting length. The concentration of lactate had quadratic effect (p = 0.007), which was highest in R20 silage (p < 0.05). The concentration of acetate was increased linearly (p = 0.014), but the concentration of butyrate was decreased linearly (p = 0.033). The lactic acid bacteria count was decreased linearly (p = 0.017), and yeast count had quadratic effect (p = 0.009), which was the highest in R20 silage (p < 0.05). Aerobic stability had strong quadratic effect (p < 0.001), which was the highest in R20 silage (p < 0.05). In conclusion, R60 silage had highest pH by a linear increase of ammonia-N concentration and led to low aerobic stability. While R20 silage had the lowest pH by high lactate concentration and led to high aerobic stability.

본 연구는 이탈리안 라이그라스 원형베일 사일리지 조제에 있어서 원료작물의 수분함량과 베일러 챔버의 압력에 따른 사일리지의 사료가치와 발효품질의 변화를 구명하기 위하여 수행되었다. 수확 후 1일(고수분), 2일(중수분) 및 4일간(저수분) 각각 예건하여 서로 다른 수분함량의 이탈리안 라이그라스를 베일러 챔버 압력이 115, 130 및 145 bar로 설정된 베일러로 원형베일 사일리지를 조제하여 60일간 저장하였다. 베일 사일리지의 무게는 고수분 처리구에서 높게 나타났고, 건물중은 저수분 처리구가 유의적으로 높게 나타났다. 베일러 압력에 따른 사일리지의 무게는 유의적인 차이는 없었으나, 압력이 증가할수록 건물중은 증가하였다. 수분함량과 베일러 압력에 따른 사일리지의 NDF, ADF, CP 및 CF는 처리 간에 유의적인 차이가 없었으며, RFV (relative feed value)는 고수분 저압력 처리구에서 가장 높게 나타났다. Lactic acid는 고수분-고압력 처리구가 가장 높았으며, 저수분-중압력 처리구에서 가장 낮게 나타내었다. Butyric acid는 베일러 압력에 따른 유의적인 차이는 없었으나, 예건기간이 길어질수록 감소하였다. 사일리지 pH는 고수분 처리구가 중수분과 저수분 처리구에 비해 낮게 나타났으나, 베일러 압력에 따른 차이는 없었다. 이러한 결과는 이탈리안 라이그라스 원형베일 사일리지 조제 시 조사료의 수분함량과 베일러 챔버의 압력이 사일리지의 발효품질에 영향을 미치는 중요한 요인임을 나타내는 것이다.

The present study investigated effects of antifungal and carboxylesterase inoculant on rumen fermentation with different rumen pH. Corn silage was treated without inoculant (CON) and with a mixed Lactobacillus brevis 5M2 and L. buchneri 6M1 (MIX). Rumen fluid was collected from two cannulated Hanwoo heifers before morning feeding (high rumen pH at 6.70) and 3 h after feeding (low rumen pH at 6.20). Dried corn silage was incubated in the rumen buffer (rumen fluid + anaerobic culture medium at 1:2 ratio) for 48 h at 39oC. Eight replications for each treatment were used along with two blanks. Both in a high and a low rumen pH, MIX silages presented higher (p<0.05) the immediately degradable fraction, the potentially degradable fraction, total degradable fraction, and total volatile fatty acid (VFA) than those of CON silages. Incubated corn silages in a low rumen pH presented lower (p<0.05) total degradable fraction, ammonia-N, total VFA (p=0.061), and other VFA profiles except acetate and propionate, than those in a high rumen pH. The present study concluded that application of antifungal and carboxylesterase inoculant on corn silage could improve degradation kinetics and fermentation indices in the rumen with high and low pH conditions.

The present study was conducted to investigate the effects of feed types (powder vs. pellet) from potato by-product containing glycoalkaloid on rumen fermentation with different rumen pH (low vs. high) using in vitro technique. Rumen fluid was collected from two cannulated Hanwoo heifers before morning feeding (high rumen pH at 6.71) and 3 h after feeding (low rumen pH at 6.20). A 0.5 gram of powder or pellet from potato by-product was incubated in the rumen buffer for 48 h at 39℃. Four replications for each treatment were used along with two blanks. Pellet had higher (p<0.05) the immediately degradable fraction, the fractional degradation rate, and the lag phase than those of powder. However, feed type had no effects on the potentially degradable fraction and the total degradable fraction. In fermentation characteristics, powder had higher (p<0.05) concentrations of ammonia-N, total volatile fatty acid (VFA), and acetate than those of pellet. In addition, a high rumen pH had higher (p<0.05) concentrations of ammonia-N and acetate, but lower (p<0.05) total VFA concentration than those of a low rumen pH. The interaction effects between feed type and rumen pH were found on the total degradable fraction and concentrations of ammonia-N, total VFA, and acetate. The present study concluded that generally feed type had no effects on rumen degradation kinetics, but potato by-product in the powder form is recommended due to produce higher fermentation characteristics than in the pellet form.

This study was conducted to investigate the effect of sowing and harvesting dates on agronomic characteristics and feed values of rye and triticale at Sanchoeng, South Korea. The experimental design consisted of the different sowing and harvesting dates as follows; rye (Secale cereale L., cv. Gogu) of sowing (October 15, 25, and November 5) in 2015 and harvesting (April 20, May 1 and May 11) in 2016, and triticale (X Triticosecale, cv. Joseong) of sowing (October 15, 25, and November 5) in 2015 and harvesting (May 18, 28, and June 7) in 2016. In rye, fresh and dry matter (DM) yields increased (p<0.05) with the delayed-harvesting date. Crude protein (CP) content and relative feed value (RFV) decreased (p<0.05) with the delayed-harvesting date, but neutral detergent fiber (NDF) content increased (p<0.05). In triticale, fresh and dry matter (DM) yields increased (p<0.05) with the delayed-harvesting date. The CP content decreased (p<0.05) with the delayed-harvesting date, but NDF content and RFV increased (p<0.05). This study concluded that rye sown in the middle of October then harvested in early May, and the triticale sown at the end of October then harvested at the end May are recommended to increase dry matter yield and feed value.

The goal of this study was to evaluate effects of various microbial and organic additives on chemical compositions, fermentation indices, and aerobic stability of barley silage. Youngyang barley harvested at 31.5% dry matter (DM), and ensiled into 20 L bucket silo for 0, 1, 3, 7, 48, and 100 d in quadruplicates with four additives following: sterile destilled water at 1% of fresh forage (CON); Lactobacillus plantarum at 1.2 x 105 cfu/g of fresh forage (CL); Lactobacillus buchneri at rate of 1.2 x 105 cfu/g fresh forage (LB); Fermented Persimmon Extract at 1% of fresh forage (FPE); and Essential Oil at 1% of fresh forage (EO). On 100 d of ensiling, CL and FPE silages had lower (p<0.05) DM than CON silage. Additionally, FPE silage had higher (p<0.05) crude protein than CON silage. All silages with additives, except EO, had higher (p<0.05) neutral detergent fiber (NDF) than CON silage. Silage treated with CL, LB, and FPE had lower in vitro DM digestibility than CON silage, and silages treated with LB and FPE had higher in vitro NDF digestibility (IVNDFD) on 100 d of ensiling. The PFE silage produced the highest (p<0.05) lactate during ensiling period, while LB silage produced the highest (p<0.05) acetate. All inoculated silages had higher (p<0.05) LAB count than control silage. Only CL silage had higher (p<0.05) yeast count than control silage, while the other silages were not differ compared to CON silage. The aerobic stability was higher (p<0.05) in LB and FPE silages than in CON silage. In conclusion, FPE could be an alternative additive to increase IVNDFD, fermentation indices, and aerobic stability of barley silage.