There are many types of foam molding methods. The most commonly used methods are the pressure foaming method, in which foam resin is mixed with a foaming agent at high temperature and high pressure, and the normal pressure foaming method, which foams at high temperature without pressure. The polymer resins used for foaming have different viscosities. For foaming under normal pressure, they need to be designed and analyzed for optimal foaming conditions, to obtain resins with low melt-viscosity or a narrow optimal viscosity range. This study investigated how changes in viscosity, molding temperature, and cross-link foaming conditions affected the characteristics of the molded foam, prepared by blending rubber polymer with biodegradable resin. The morphologies of cross sections and the cell structures of the normal pressure foam were investigated by SEM analysis. Properties were also studied according to cross-link/foaming conditions and torque. Also, the correlation between foaming characteristics was studied by analyzing tensile strength and elongation, which are mechanical properties of foaming composites.

The slaughter of livestock is inevitably required to obtain meat products from livestock. Since slaughter means pain and death for animals, reducing the pain and distress of animals during slaughter is very important from a perspective of animal welfare based on the principle of respect for life. Generally, two stunning methods, CO2 stunning and electrical stunning, are used for slaughter. When the carotid arteries of the lungs are cut off for bleeding, the bronchial tubes are also severed. To determine the degree of blood inflow into the lungs through the severed bronchial tubes, the prevalence rates of pulmonary diseases and pulmonary congestion in slaughtered pigs were analyzed. In this study, the prevalence of pneumonia was 24.9% in Slaughterhouse A using the gas method, but it was decreased by about 10% to 15.7% and 12.6%, respectively, in Slaughterhouses B and C using the electric method. On the other hand, the prevalence of pulmonary congestion in Slaughterhouses A, B, and C was 4.24%, 14.10% and 16.40%, respectively. In other words, the prevalence of pulmonary congestion was higher by about 10% in the groups of pigs slaughtered by the electric method (Slaughterhouses B and C) than in the group of pigs slaughtered by the gas method (Slaughterhouse A). These results indicate that blood inflow into the pulmonary alveoli led to a diagnosis of pulmonary congestion instead of pneumonia in some pigs with pneumonia. In short, it was found that about 10% of pigs stunned by the electric method were not in a state of complete unconsciousness but in a partially conscious state during slaughter. It is suggested that slaughterhouses should be equipped with gas stunning equipment instead of applying the electric method due to lower costs.

본 연구는 원통형 종이포트 토마토 육묘시 Diniconazole의 처리방법이 도장억제 및 근권발달에 미치는 영향을 검토하기 위하여 수행되었다. 그 결과, 엽면적, LAR, 초장, 충실도, 생체중, RGR 및 R/S 에서 시험구간 유의한 차이를 보였다. 동일한 농도를 처리했을 경우, 근권부와 지상부의 흡수도 차이로 인해 저면관수가 엽면살포에 비해 도장억제에 효과적이었다. 저면관수는 엽면시비의 10분의 1의 농도만으로도, 20~30%정도의 동일한 도장억제 효과를 얻을 수 있었다. 디니코나졸 처리에의한 근권부 반응이 흥미로웠는데, 저면관수시 총근장, 근권부피, 평균 근경 및 근단수가 증가하였다. 특히, 0.3mm 이하의 초미세근이 감소하고 0.3~0.6mm의 세근이 증가하였다. 따라서 원통형 종이포트 육묘시 저면관수를 하는 것이 기존 엽면시비에 비해 사용량이 적으면서도 도장억제 및 근권부 활착률을 높힐 수 있을 것으로 판단된다.

This paper examines a simple one-step and catalyst-free method for synthesizing carbon nanoparticles from aliphatic alcohols and n-hexane with linear molecule formations by using a stable solution plasma process with a bipolar pulse and an external resistor. When the external resistor is adopted, it is observed that the current spikes are dramatically decreased, which induced production of a more stable discharge. Six aliphatic linear alcohols (methanol- hexanol) containing carbon with oxygen sources are studied as possible precursors for the massive production of carbon nanoparticles. Additional study is also carried out with the use of n-hexane containing many carbons without an oxygen source in order to enhance the formation of carbon nanoparticles and to eliminate unwanted oxygen effects. The obtained carbon nanoparticles are characterized with field emission-scanning electron microscopy, energy dispersive X-ray spectroscopy, and Raman spectroscopy. The results show that with increasing carbon ratios in alcohol content, the synthesis rate of carbon nanoparticles is increased, whereas the size of the carbon nanoparticles is decreased. Moreover, the degree of graphitization of the carbon nanoparticles synthesized from 1-hexanol and n-hexane with a high carbon (C)/oxygen (O) ratio and low or no oxygen is observed to be greater than that of the carbon nanoparticles synthesized from the corresponding materials with a low C/O ratio.

An Al2O3/AlN bilayer deposited on GaN by atomic layer deposition (ALD) is employed to prepare Al2O3/AlN/GaN metal-insulator-semiconductor (MIS) diodes, and their interfacial properties are investigated using X-ray photoelectron spectroscopy (XPS) with sputter etch treatment and current-voltage (I-V) measurements. XPS analyses reveal that the native oxides on the GaN surface are reduced significantly during the early ALD stage, indicating that AlN deposition effectively clelans up the GaN surface. In addition, the suppression of Al-OH bonds is observed through the ALD process. This result may be related to the improved device performance because Al-OH bonds act as interface defects. Finally, temperature dependent I-V analyses show that the barrier height increases and the ideality factor decreases with an increase in temperature, which is associated with the barrier inhomogeneity. A Modified Richardson plot produces the Richardson constant of A** as 30.45 Acm−2K−2, which is similar to the theoretical value of 26.4 Acm−2K−2 for n-GaN. This indicates that the barrier inhomogeneity appropriately explains the forward current transport across the Au/Al2O3/AlN/GaN interface.

Carbon nanofibers (CNF) are widely used as active agents for electrodes in Li-ion secondary battery cells, supercapacitors, and fuel cells. Nanoscale coatings on CNF electrodes can increase the output and lifespan of battery devices. Atomic layer deposition (ALD) can control the coating thickness at the nanoscale regardless of the shape, suitable for coating CNFs. However, because the CNF surface comprises stable C–C bonds, initiating homogeneous nuclear formation is difficult because of the lack of initial nucleation sites. This study introduces uniform nucleation site formation on CNF surfaces to promote a uniform SnO2 layer. We pretreat the CNF surface by introducing H2O or Al2O3 (trimethylaluminum + H2O) before the SnO2 ALD process to form active sites on the CNF surface. Transmission electron microscopy and energy-dispersive spectroscopy both identify the SnO2 layer morphology on the CNF. The Al2O3-pretreated sample shows a uniform SnO2 layer, while island-type SnOx layers grow sparsely on the H2Opretreated or untreated CNF.

This study was conducted to estimate the effect of home or hetero fermentative lactic acid bacteria(LAB) on chemical composition, fermentation quality, and aerobic stability of rye silage. Rye forage was harvested at dough stage(28.9% of dry matter), chopped to 3-5 cm length, and divided into 4 piles for different inoculations as treatment, following 1) No additives(CON); 2) Lactobacillus plantarum at rate of 1.5 x 105 cfu/g of fresh forage(LP); 3) L. buchneri at rate of 1.2 x 105 cfu/g of fresh forage(LB); and 4) Mixture of LP and LB at 1:1 ratio(MIX). Rye silage was ensiled into 20 L bucket silo in quadruplicate for 0, 1, 4, 7, and 100 day periods. After 100 days of ensiling, the silage treated with LB had lower acid detergent fiber content(p<0.05), but higher in vitro dry matter digestibility(p<0.05). The LB and MIX reduced (p<0.05) pH more rapidly than CON and LP across the ensiling days, but had no difference on 100 days. Silage treated LP had lowest(p<0.05) acetic acid, but highest(p<0.05) propionic acid. In contrast, LB treated silage had highest(p<0.05) acetic acid, but lowest(p<0.05) propionic acid with the absence of butyric acid. On microbial count, LP treated silage had lowest(p<0.05) LAB, yeast, and aerobic stability, whereas LB and MIX treated silages had highest(p<0.05). Mold was not detected across all silages. Therefore, it could be concluded that heterofermentative LAB solely or combo with homofermentative LAB might improve in vitro dry matter digestibility, fermentation characteristics, and aerobic stability of rye silage harvested at dough stage.

Lithium-ion batteries (LIBs) are rapidly improving in capacity and life cycle characteristics to meet the requirements of a wide range of applications, such as portable electronics, electric vehicles, and micro- or nanoelectromechanical systems. Recently, atomic layer deposition (ALD), one of the vapor deposition methods, has been explored to expand the capability of LIBs by producing near-atomically flat and uniform coatings on the shell of nanostructured electrodes and membranes for conventional LIBs. In this paper, we introduce various ALD coatings on the anode, cathode, and separator materials to protect them and improve their electrochemical and thermomechanical stability. In addition, we discuss the effects of ALD coatings on the three-dimensional structuring and conduction layer through activation of electrochemical reactions and facilitation of fluent charge collection.

In the present study, lichen(Parmelia sp.) extract showed insecticidal activity against Aedes albopictus, and the effect of growth inhibiting activity was investigated. Acetone and methanol extracts of the lichen against larvae of Aedes albopictus were showed high insecticidal activities in low lethal concentration. 50% lethal concentration of the acetone extractof the lichen is 0.13% and the 50% lethal concentration of methanol extract of lichen is 0.15% respectively. This experiment that used acetone and methanol extracts of the lichen were observed for 24, 48 and 72 hours. As a result, the higher concentration and the longer exposure time is increased mortality against Aedes albopictus. Pupation time took more time as the higher concentration of acetone extract of lichen. Consequently, the lichen extract is effect in inhibiting the growth of Aedes albopictus larvae. In this experiment indicates that lichen extract has activity against Aedes albopictus and is available as the natural insecticide.

Information System (IS) Success Model proposed by DeLone and McLean is applied as a successful operation tool of information system, with its basic assumption of symmetric relationship between independent variables and dependent variables of the structural equation modeling. However, because previous studies have proved asymmetry of quality factors' influence structure on dependent variable by applying three-factor analysis, this study examined asymmetry of impact structure of quality factors introduced in IS Success Model on user satisfaction. Also the study applies structure equation modeling (SEM), threefactor analysis and importance and performance analysis (IPA) to develop resource allocation strategy for IS success. The study is able to provide IS practitioners with strategic implications for allocating and managing limited resources more effectively.

Most patients with chronic low back pain experience functional disability of trunk muscle, and limitations in physical activity. While there are many types of exercise programs available, in recent years sling exercise has been emerging as the exercise program for spinal stabilization. It has been supported by a great amount of research with positive findings on its effectiveness. This research studies the effects of bridging exercise, conducted on a sling, on pain level and trunk muscle activation in supine, sidelying, and prone positions during a 4 weeks period. 10 healthy people(normal group, n=10) and 28 patients with low back pain participated in this study. 28 patients were divided into two groups; one group participated in exercise with the sling(experimental group, n=14) and the other group exercised without the sling(control group, n=14). They were asked to use the Numerical Rating Scale(NRS) to answer to the level of their pain they felt (no pain: 0 point, severe pain: 10 points). During sling bridging exercises, the muscle activity level in each muscle measured in each position was standardized as three seconds of EMG signals during five seconds MVIC. In conclusion, the experimental group with four weeks of sling bridging exercise experienced a statistically significant reduction in the pain level(p<.05) and increase in the muscle activities of erector spinae when in supine position, internal oblique when in sidelying position, and rectus abdominis in prone position(p<.05). Regular sling bridging exercise reduces the low back pain and enhances other trunk muscle activation, thereby positively affect spinal stabilization.

To identify subspecies and stocks of minke whale meats purchased from Korean markets during 2005-2007, we first obtained their complete sequences of mitochondrial DNA cytochrome b and control region sequences, and compared these sequences to the corresponding sequences of the common minke whale (Balaenoptera acutorostrata), obtained from GenBank. From analyses with partial cytochrome b sequences (383 bp) and non-coding, partial control region sequences (463 bp), Korean mink whale meats are identified as products from the North Pacific minke whale (B. a. scammoni). In addition, the sequences of the partial control region from these meats showed G at site no. 298 and G or A at site no. 463, and the meats appeared to originate from the J stock within this subspecies. Thus, because the J stock has been protected since 1986, implementation of strict regulation measures to reduce their accidental fisheries by catch seems urgent. In addition, B. a. scammoni is distinct from B. a. acutorostrata, with an average Jukes-Cantor distance of 2.21% in the complete control region sequence analysis (935 bp) and 1.31% in the complete cytochrome b gene sequence analysis; the current results support the current subspecies classification, although further sequencing analyses with nuclear genes are necessary.

The cottony cushion scale, Icerya purchasi Maskell (Hemiptera: Margarodidae), is a destructive pest on citrus. This study was conducted to obtain the stage-specific phenology of I.purchasi for use in field application. The crawlers (hatched nymphs) from the egg sac of overwintered female began to move from late May and peaked in early to mid-June with most crawlers completed the movement till late June. The 1st nymph population peaked in mid June in 1stgeneration and early October in 2ndgeneration. The 2nd nymphs showed peak activity in late July and late October during the 1st and 2nd generation, respectively. The 3rd nymphs peaked in early September in 1st generation, while it kept a plateau without forming a peak after mid October in 2nd generation. The 1st generation adults peaked in mid September, and the tail was overlapped with 2nd generation adult population. Consequently, two life cycles were competed in Jeju area. An average of 20.7% of citrus orchards was infested with I. purchasi with a 3.9% of mean infested trees in Jeju. The present results should be useful in establishing management strategies for I. purchasi in citrus orchards.

The turnip aphid is a worldwide pest, damaging mainly to crucifers. In order to understand the life parameters of Lipaphis erysimi for the eventual goal of control, the developmental periods, survival rates, lifespan, and fecundity of the species were investigated under five temperature regimes (15℃ - 35℃). Furthermore, the efficacy of several environment-friendly agricultural materials (EFAMs) that are on the market was subjected to test in order to obtain further accurate information. The developmental period of the turnip aphid nymph was longest at 15ºC as 16.9 days, shortened as temperature goes up to 25ºC (5.4 days), and then somewhat increased at 30ºC (5.9 days), suggesting that the most efficient temperature for nymphal development could be around 25ºC. Mortality of the nymphal turnip aphid was obvious at 35ºC, whereas it was minimal at other temperature schemes. The longevity of adults shortened as temperature goes up to 30ºC. In particular, the maximum lifespan for adults continued for 55 days at 15ºC, but shortened to 21 days at 30ºC. The total fecundity per day was 35.7 at 15ºC, 81 at 20ºC, 64.2 at 25ºC, and 6.6 individuals at 30ºC, showing the highest fecundity at 20ºC. After the turnip aphids were successfully stabilized in indoor environment the insecticidal activity was tested and mortality was determined 12, 24, 36, and 48 hrs after EFAMs are treated. Several on-the-market EFAMs showed more than 90% of insecticidal activity within 24 hrs or 48 hrs, but a few showed less than 90% activity, signifying importance of selection of proper EFAMs.

Cloned calves derived from somatic cell nuclear transfer (SCNT) have been frequently lost by sudden death at 1 to 3 month following healthy birth. To address whether placental anomalies are responsible for the sudden death of cloned calves, we compared protein patterns of 2 placentae derived from SCNT of Korean Native calves died suddenly at two months after birth and those of 2 normal placentae obtained from AI fetuses. Placental proteins were separated using 2-Dimensional gel electrophoresis. Approximately 800 spots were detected in placental 2-D gel stained with coomassie-blue. Then, image analysis of Malanie III (Swiss Institute for Bioinformatics) was performed to detect variations in protein spots between normal and SCNT placentae. In the comparison of normal and SCNT samples, 8 spots were identified to be up-regulated proteins and 24 spots to be down-regulated proteins in SCNT placentae, among which proteins were high mobility group protein HMG1, apolipoprotein A-1 precursor, bactenecin 1, tropomyosin beta chain, H+-transporting ATPase, carbonic anhydrase II, peroxiredoxin 2, tyrosine-rich acidic matrix protein, serum albumin precursor and cathepsin D. These results suggested that the sudden death of cloned calves might be related to abnormal protein expression in placenta.