This study explores the impact of metal doping on the surface structure of spent nuclear fuels (SNFs), particularly uranium dioxide (UO2). SNFs undergo significant microstructural changes during irradiation, affecting their physical and chemical properties. Certain elements, including actinides and lanthanides, can integrate into the UO2 lattice, leading to non-stoichiometry based on their oxidation state and environmental conditions. These modifications are closely linked to phenomena like corrosion and oxidation of UO2, making it essential to thoroughly characterize SNFs influenced by specific element doping for disposal or interim storage decisions. The research employs X-ray diffraction (XRD), scanning electron microscopy (SEM), and Raman spectroscopy to investigate the surface structure of UO2 samples doped with elements such as Nd3+, Gd3+, Zr4+, Th4+, and ε-particles (Mo, Ru, Pd). To manufacture these samples, UO2 powders are mixed and pelletized with the respective dopant oxide powders. The resulting pellet samples are sintered under specific conditions. The XRD analysis reveals that the lattice parameters of (U,Nd)O2, (U,Gd)O2, (U,Zr)O2, and (U,Th)O2 linearly vary with increasing doping levels, suggesting the formation of solid solutions. SEM images show that the grain size decreases with higher doping levels in (U,Gd)O2, (U,Nd)O2, and (U,Zr)O2, while the change is less pronounced in (U,Th)O2. Raman spectroscopy uncovers that U0.9Gd0.1O2-x and U0.9Nd0.1O2-x exhibit defect structures related to oxygen vacancies, induced by trivalent elements replacing U4+, distorting the UO2 lattice. In contrast, U0.9Zr0.1O2 shows no oxygen vacancy-related defects but features a distinct peak, likely indicating the formation of a ZrO8-type complex within the UO2 lattice. ε-Particle doped uranium dioxide shows minimal deviations in surface properties compared to pure UO2. This structural characterization of metal-doped and ε-particle-doped UO2 enhances our understanding of spent nuclear fuel behavior, with implications for the characterization of radioactive materials. This research provides valuable insights into how specific element doping affects the properties of SNFs, which is crucial for managing and disposing of these materials safely.

Noble metal phase, present in used fuel, are fission products that can be found as metallic precipitates in used nuclear fuel. They exist as small particles (nm~um) in grain boundaries of the used fuels. Since they are particles deposited between the grain structures, they can be considered as defects in the pellet structure. Thermal expansion of fuels with noble metal is slightly higher than that of bare fuels. The fuels at high temperature, such as immediately after being discharged from nuclear reactors, may be subject to fuel failure if sufficient cooling is not provided. Recent research has shown that the noble metals can migrate into the rim space between the pellet and the cladding, and be deposited in the inner layer of the claddings. therefore, the mechanical integrity of the cladding can be degraded by noble metals, as well as the pellets. The concentration of the noble metal phase should be considered to evaluate the effect of the noble metals on the fuel integrity, after discharge from the reactors. SCALE/ORIGEN code was used to evaluate the noble metals in fuel assembly-scale, and the radial distribution in the fuel assembly. The radial distribution of the reactor power was derived from the SCALE/TRITON, considering Westinghouse 17×17. Square cell model was chosen for the geometry and 1/4 model was applied to reduce the computation time.

During the initial cooling period of spent nuclear fuel, Cs-137 and Sr-90 constitute a large portion of the total decay heat. Therefore, separating cesium and strontium from spent nuclear fuel can significantly decrease decay heat and facilitate disposition. This study presents analytical technique based on the gas pressurized extraction chromatography (GPEC) system with cation exchange resin for the separation of Sr, Cs, and Ba. GPEC is a micro-scaled column chromatography system that allows for faster separation and reduction volume of elution solvent compared to conventional column chromatography by utilizing pressurized nitrogen gas. Here, we demonstrate the comparative study of the conventional column chromatography and the GPEC method. Cation exchange resin AG 50W-X12 (200~400 mesh size) was used. The sample was prepared at a 0.8 M hydrochloric acid solution and gradient elution was applied. In this case, we used the natural isotopes 88Sr, 133Cs, and 138Ba instead of radioactive isotopes for the preliminary test. Usually, cesium is difficult to measure with ICP-OES, because its wavelengths (455.531 nm and 459.320 nm) are less sensitive. So, we used ICP-MS to determine the identification and the recovery of eluate. In this study, optimized experimental conditions and analytical result including reproducibility of the recovery, total analysis time and volume of eluents will be discussed by comparing GPEC and conventional column chromatography.

Bisphenol-A, also known as BPA, is commonly used as a building block for epoxy and polycarbonate plastics. However, it has been recently identified as a major source of water pollution due to its release into the water from plastic products. BPA-based resins can also contaminate the water with high concentrations of BPA, which can enter the water bodies through production units and wastewater discharge. Photocatalysis, particularly the photo-Fenton process, is an effective method for wastewater treatment and degrading pollutants. Titanium dioxide (TiO2) is usually chosen based on its high photocatalytic properties and high performance. However, its wide band gap energy is a major issue for the photocatalytic process. This means that the catalyst can only exhibit high photocatalytic performance under UV-light irradiation and usually requires an acidic pH, which limits its use. In order to address the aforementioned issues, a visible-light photoactive photo-Fenton reaction has been successfully developed to degrade bisphenol A at natural pH using H2O2. The process was highly efficient, achieving complete degradation of phenol in just three hours of visible light irradiation with Cu-MOF. This environmentally friendly Fenton process has the advantage of occurring at natural pH levels with the presence of H2O2, providing a new perspective for efficient degradation. The photocatalyst was characterized using single X-ray diffraction (SC-XRD), powder X-ray diffraction (PXRD), Fourier Transform Infrared Spectroscopy (FTIR), and UV–vis diffuse reflectance spectroscopy (DRS).

KHNP is conducting research to decommission Wolsong Unit 1 Calandria. Establishment of preparation and dismantlement processes, conceptual design of equipment and temporary radiation protection facilities, and waste management are being established. In particular, the ALARA plan is to be established by performing exposure dose evaluation for workers. This study aims to deal with the methodology of evaluating exposure dose based on the calandria dismantling process. The preparation process consists of bringing in and installing tooling and devices, and removing interference facilities to secure work space. The main source term for the preparation process is the calandria structure itself and crud of feeders. In the case of the dismantlement process, a structure with a shape that changes according to the process was modeled as a radiation source. It is intended to estimate the exposure dose by selecting the number of workers, time, and location required for each process in the radiation field evaluated according to the preparation and dismantlement process. In addition, it is also conducting an evaluation of the impact on dust generated by cutting operations and the human impact of C-14, H-3, which are specialized nuclides for heavy water reactors. KHNP is conducting an exposure dose evaluation based on a process based on the preparation and dismantlement process for decommissioning Calandria through computation code analysis. If additional worker protection measures are deemed necessary through dose evaluation according to this methodology, the process is improved to prepare for the dismantling of worker safety priorities.

Heavy metal wastewater containing cobalt (Co2+) has received more attention as an environment issue, which is released from electroplating processes, battery materials industries, nuclear power plants, etc. Especially, cobalt exposed to high-temperature and high-pressure environment during the operation of a nuclear power plant to form corrosion products and forming a chalk river unidentified deposit (CURD) along with radioactive materials generated in cooling water pipes. Cobalt present in the oxide film is mainly Co-60, which emits radiation and causes increased radiation exposure to workers, and efficient management is essential. In this study, we demonstrated the performance of copper hexacyanoferrate (CuHCF) electrodes in a capacitive deionization (CDI) system for Co2+ ions removal. The structure and chemical status of CuHCF used as an electrode material were characterized, and electrochemical properties were evaluated. This study showed that Co2+ ions could be efficiently removed in aqueous solutions using CuHCF electrodes. It has been experimentally shown that the ion removal mechanism is driven by the insertion of Co2+ ions within the CuHCF lattice channels. The deionization capacities in 20 and 50 mg-Co2+ L-1 aqueous solutions were 141.62 and 156.85 mg g-1, respectively, and the corresponding charge efficiencies (Λ) were 0.55 and 0.68, respectively. Thus, we suggest that an electrochemically driven process using CuHCF can usefully remove Co2+ ions from wastewater.

Fast-paced advancements in technology demand swift adaptation and presents new opportunities and challenges for the optimization of communication, especially for advertisers. Digitalization and new developments in ICT have brought significant changes to the ways in which information, especially promotional messages, is disseminated to consumers. Additionally, with explosive interests in anticipation of fully autonomous vehicles, this study identifies and addresses the potential to optimize communication in an under examined digital media environment – in-vehicle infotainment system. Therefore, this study proposes a text-image embedding method recommender system for the personalization of multimedia contents and advertisements for in-vehicle infotainment systems. Unlike most previous research, which focuses on textual-only or image-only analyses, the current study explores the understanding, development and application of text embedding models and image feature extraction methods simultaneously in the context of target advertisement research. Overall, this study highlights the need to adapt to the ever-evolving technological landscape to optimize communication in various digital media environments. With the proposed text-image embedding method, this study offers a unique approach to personalizing multimedia content and advertisements in the under-explored digital media environment of in-vehicle infotainment systems.

This study assessed the utility of netted melon ‘Top Earl’s’ and cantaloupe melon ‘Alex’ as functional fruits by analysing their moisture content, vitreous sugar, folic acid, citric acid, and beta-carotene levels. High-performance liquid chromatography (HPLC) was used to analyse the free sugar, folic acid, citric acid, and beta-carotene levels. The moisture content was not significantly different between ‘Top Earl’s’ and ‘Alex.’ The glucose, sucrose, and fructose contents were three, two, and one-and-a-half fold higher in ‘Alex’ than in ‘Top Earl’s.’ Moreover, citric acid was approximately three times higher in ‘Alex’ than that in Top Earl’s.’ However, the folic acid content was higher in ‘Top ‘Earl’s’ than ‘Alex,’ and the amount was 124 μg / 100 g FW and 112 μg / 100 g FW respectively. ‘Beta-carotene was undetectable in ‘Top Earl’s,’ whereas it was 1000 μg / 100 g FW in ‘Alex.’ β-carotene, a substance that is converted in the body into vitamin A and acts as an antioxidant, is an important component in healthy food. These results suggested that the cantaloupe melon ‘Alex’ has a higher free sugar content and functional ingredients, such as antioxidants, including citric acid and beta carotene, than the netted melon ‘Top Earl’s.’

Confirmation of the thermal behavior of spent fuel is one of the important points in the management of high-level radioactive waste. This is because various fission products exist in spent nuclear fuel, and a management plan according to their behavior is required. Among the fission products, epsilon particles exist in the form of metal deposits and have a great influence on their physical and chemical properties. However, observing the thermal behavior of epsilon particles is important for understanding spent fuel behavior in thermally environment, but it is difficult to maintain a consistent thermal environment. In this work, we report the thermal behaviors study of uranium oxide with epsilon particle using in situ high temperature X-ray diffraction. We measured the variation of temperature on the size of crystalline, which is a cell parameter in the reaction process. And then, the change of lattice parameters is calculated by Rietveld refinement.

Noble metal precipitates are fission products that can be found as metallic alloys in used nuclear fuel. They do not exist homogenously inside the fuel pellets, but exists in grain boundaries in the form of immiscible particles. The first drawback that comes because they exist in grain boundaries is the degradation of mechanical integrity. The particles in the grain boundaries can be considered as defect n solid solution of uranium oxide pellets, and they can change the lattice volume. Therefore, it is known that it can cause stress corrosion cracking of fuel pellets. Furthermore, there is a negative effect from the perspective of used fuel management. However, they also have a positive effect on used fuel management. Since the noble metal has galvanic reduction effect, the particles serve as an oxidation inhibitor for uranium. There are many other effects regarding to the noble metal precipitates. However, in any case, quantifying the particles is important in order to quantitatively analyze these effects from the perspective of used fuel management. SCALE/TRITON code was applied to calculate the noble metal isotopes including Mo, Tc, Ru, Rh and Pd. In order to calculate the distribution inside the pin, the multiregion cell model was selected. In particular, a cylindrical geometry was used, and the pellet was divided into several layers. In addition, coolant and cladding surrounded the pellet. Finally, the radial distribution was evaluated using the computational code, along with neutron flux map.

To evaluate the characteristics of radioactive waste from permanently shut down nuclear power plants for decommissioning, there is a method of directly analyzing samples and, on the other hand, a computerized evaluation method based on operation history. Even if the radioactivity of the structures or radioactive wastes in the nuclear power plant is analyzed by the computerized evaluation method, a method of directly analyzing the sample must be accompanied in order to more accurately know the characteristics of the nuclear power plant’s radioactive waste material. In order to obtain such samples, we need a way to collect materials from radioactive waste. However, in the case of a permanently shut down nuclear power plant with a long operating history, human access is limited due to radiation of the material. In this study, we propose a method of remotely collecting samples that guarantees radiation protection and worker safety at the site where radioactive waste is located.

In this study, we evaluated the performance of phosphate-functionalized silica in adsorbing uranium and provided insights into optimizing the initial conditions of the uranium solution (concentration and pH), which are often overlooked in uranium adsorption studies. While most studies take into account the effect of pH on both the surface charge of the adsorbents and the dissolved speciation of uranium in solution, they often overlook the formation of solid phases such as β-UO2(OH)2 (cr) and UO3· 2H2O(cr), leading to an overestimation of the adsorption capacity. To address this issue, we considered the speciation of U(VI) calculated using thermodynamic data. Our findings suggest that it is reasonable to evaluate the adsorption performance at pH 4 and concentration below 1.35 mM. The formation of β-UO2(OH)2 (cr) starts at 23 μM (pH 5) and 1 μM (pH 6) and increases sharply with increasing concentration. To avoid interference from the formation of solid phases, experiments should be conducted at lower concentrations, which in turn require very small msorbent/Vsolution ratios. However, controlling small amounts of sorbent can be challenging, and increasing the volume of the solution can generate significant amounts of radioactive waste. We also used UV-vis spectra analysis to investigate the formation of solid phases. We found that a 100 mg L-1 uranium solution resulted in the formation of colloidal particles in the solid phase after 2.5 hours at pH 6, while at pH 4, no significant changes in absorbance were observed over 120 hours, indicating a stable ion phase. Based on these conditions, we obtained an excellent adsorption capacity of 110 mg g-1.

KHNP is carrying out international technical cooperation and joint research projects to decommission Wolsong unit 1 reactor. Construction data of the reactor structures, experience data on the pressure tube replacement projects, and the operation history were reviewed, and the amount of dismantled waste was calculated and waste was classified through activation analysis. By reviewing COG (CANDU owners Group) technical cooperation and experience in refurbishment projects, KHNP’s unique Wolsong unit 1 reactor decommissioning process was established, and basic design of a number of decommissioning equipment was carried out. Based on this, a study is being conducted to estimate the worker dose of dismantling workers. In order to evaluate the dose of external exposure of dismantling workers, detailed preparation and dismantling processes and radiation field evaluation of activated structures are required. The preparation process can be divided into dismantlement of existing facilities that interfere with the reactor dismantling work and construction of various facilities for the dismantlement process. Through process details, the work time, manpower, and location required for each process will be calculated. Radiation field evaluation takes into account changes in the shape of structures by process and calculates millions of areas by process, so integrated scripts are developed and utilized to integrate input text data. If the radiation field evaluation confirms that the radiation risk of workers is high, mutual feedback will be exchanged so that the process can be improved, such as the installation of temporary shields. The results of this study will be used as basic data for the final decommissioning plan for Wolsong unit 1. By reasonably estimating the dose of workers through computer analysis, safety will be the top priority when decommissioning.

Prevention of radiation hazards to workers and the environment in the event of decommissioning nuclear power plants is a top priority. To this end, it is essential to continuously perform radiation characterization before and during decommissioning. In operating nuclear power plants, various detectors are used depending on the purpose of measurement. Portable detectors used in power plants have excellent portability, but there is a limit to the use of a single measuring device alone to quantify radioactive contamination, nuclide analysis, and ensure representation of measurement results. In foreign countries, gamma-ray visualization detectors are being actively used for operating and decommissioning nuclear power plants. KHNP is also conducting research on the development of gamma-ray visualization detectors for multipurpose field measurement at decommissioning nuclear power plants. It aims to develop detectors capable of visualizing radioactive contamination, analyzing nuclides, estimating radioactivity, and estimating dose rates. To this end, we are developing related software according to the development process by purchasing sensors from H3D, which account for more than 75% of the US gamma-ray visualization detector market. In addition, field tests are planned in the order of Wolsong Unit 1 and Kori Unit 1 with Research reactor in Gongneung-dong in accordance with the progress of development. The detector will be optimized by analyzing the test results according to various gamma radiation field environments. The development detector will be used for various measurement purposes for Kori unit 1 and Wolsong

The removal of aqueous pollutants, including dye molecules from wastewater remains one of the pressing problems in the world. Because of chemical stability and conjugated structure, dye molecules cannot be easy decomposed by heat with oxidizing reagents such as H2O2 and light. The most common representative of widespread organic pollutant is methylene blue (MB) with molecular formula C16H18ClN3S, which is important colorant and used in various chemical and biological production industries and causes serious environment problems. Porous materials, including MOFs (metal-organic frameworks) have been applied for efficient MB photocatalytic degradation. However, one of the main barriers to using most MOFs to break down aromatic organics is wide band gap energy, which means that the catalyst can exhibit high photocatalytic performance only under UVlight irradiation. Moreover, most MOFs usually show the poor water stability of frameworks, which tend to dissolve in water with total destruction. In this work we report about two new copper based MOFs with high photocatalytic properties for efficient MB degradation from wastewater under UV-light and natural sunlight. Time, required for 100% MB degradation, equals 7 minutes under UV (source 4 W 254 nm VL-4.LC UV-lamp) and 60 minutes under natural sunlight irradiation in the presence of H2O2. Crystal structure information is provided using single crystal X-ray diffraction data. The composition and comparative characteristics of MOFs are given using powder X-ray diffraction, UV–visible diffuse reflectance spectroscopy, UVvisible spectroscopy and Fourier-transform infrared spectroscopy.