본 연구는 국립수목원 내 전문전시원에 발생한 이입식물을 대상으로 2015년부터 2023년까지 이입식물 분포조사를 시행 하였다. 그 결과 자생식물 299종, 귀화식물 49종, 재배식물 13 종 총 63과 214속 361종이 조사되었다. 국화과가 63종으로 가장 많았고, 벼과, 사초과 순으로 발생하였다. 이입식물의 이입 경로를 분석하기 위하여 광릉숲에 분포하는 식물상과 비교 분석 한 결과 309종이 광릉숲에 분포하는 식물로 확인되었으며, 전 문전시원 내 식재 식물이 확산된 경우가 17종으로 조사되었다. 조사된 귀화식물 49종을 원산지별로 구분하면 유럽과 북아메리카가 69.4%, 이입 시기별 1기와 3기의 비율이 90%를 차지하였 다. 귀화식물의 귀화도 분포 등급을 적용한 결과 4등급 이상이 면서 이입 시기가 3기인 식물 9종은 빠르게 확산할 우려가 큰 식물이므로 지속적인 모니터링이 필요하다. 국립수목원에 어느 정도 귀화식물이 분포하는지를 가늠하는 도시화지수를 산출한 결과 15.0%로 나타났으며, 환경부 지정 생태계교란 야생식물 중 돼지풀, 단풍잎돼지풀, 애기수영, 미국쑥부쟁이가 출현하였 다. 이입식물은 자생식물군락과 전문전시원 내 관람로에 침입하 여 세력권을 확장하고 우점하는 경향이 있어 각각의 생태적 특 성을 고려한 제거 방법이 필요하다.

This study presents a rapid and sequential radiochemical separation method for Pu and Am isotopes in radioactive waste samples from the nuclear power plant with anion exchange resin and TRU resin. After radionuclides were leached from the radioactive waste samples with concentrated HCl and HNO3, the sample was allowed to evaporate to dryness after filtering the leaching solution with 0.45 micron filter. The Pu isotopes were separated in HNO3 medium with anion exchange resin. For leaching solution passed through anion exchange column, the Am isotopes were separated with TRU resin. The purified Pu and Am isotopes were measured by alpha spectrometer, respectively, after micro-precipitation of neodymium. The sequential radiochemical separation of Pu and Am isotopes in radioactive waste samples using anion exchange resin and TRU resin was validated with ICP-MS system.

본 연구는 주변 환경의 차이에 따른 화분매개곤충의 유입 특성을 파악하기 위하여 국립수목원 내 진화속을걷 는정원과 부추속전문전시원에 식재된 울릉산마늘의 화분매개곤충을 조사하였다. 2023년 5월 22일부터 6월 2일 까지 꽃이 70% 이상 개화하였을 때 포충망을 활용하여 8일간 곤충을 채집하였고, 각 전시원 별 식생(피도), 기후 (온도·습도·조도)를 조사하였다. 조사 결과 진화속을걷는정원에서 피도 60% 온도 26.4℃, 습도 31.5%, 조도 40953.6lx, 화분매개곤충 20과 450개체, 부추속전문전시원은 피도 90%, 온도 25.6℃, 습도 31.6%, 조도 6387lx, 화분매개곤충 15과 196개체로 나타났다. 온도와 조도가 상대적으로 높은 진화속을걷는정원이 채집된 곤충의 다양성과 방문 빈도가 높았다. 시간대별 곤충의 방문 빈도를 비교해본 결과 온도와 조도는 개체수가 증가할 때 같이 증가하는 경향을 보였으며, 습도는 반대의 경향을 보였다.

In 2022, research for native prokaryotic species in Korea reported 10 unrecorded bacterial strains affiliated to phyla Actinomycetota, Bacillota, and Pseudomonadota. The strains formed monophyletic clades with the most closely related species (with ≥98.7% sequence similarity) in the 16S rRNA gene sequencing. Among them, four species of the phylum Actinomycetota, two species of the phylum Bacillota, and four species of the phylum Pseudomonadota have not been reported in Korea, suggesting unrecorded species in Korea. Information on strains such as Gram staining reaction, colony and cell morphology, biochemical characteristics, and isolation sources were provided in the species description.

This study was conducted to calculate the damage of Italian ryegrass (IRG) by abnormal climate using machine learning and present the damage through the map. The IRG data collected 1,384. The climate data was collected from the Korea Meteorological Administration Meteorological data open portal.The machine learning model called xDeepFM was used to detect IRG damage. The damage was calculated using climate data from the Automated Synoptic Observing System (95 sites) by machine learning. The calculation of damage was the difference between the Dry matter yield (DMY)normal and DMYabnormal. The normal climate was set as the 40-year of climate data according to the year of IRG data (1986~2020). The level of abnormal climate was set as a multiple of the standard deviation applying the World Meteorological Organization (WMO) standard. The DMYnormal was ranged from 5,678 to 15,188 kg/ha. The damage of IRG differed according to region and level of abnormal climate with abnormal temperature, precipitation, and wind speed from -1,380 to 1,176, -3 to 2,465, and -830 to 962 kg/ha, respectively. The maximum damage was 1,176 kg/ha when the abnormal temperature was -2 level (+1.04℃), 2,465 kg/ha when the abnormal precipitation was all level and 962 kg/ha when the abnormal wind speed was -2 level (+1.60 ㎧). The damage calculated through the WMO method was presented as an map using QGIS. There was some blank area because there was no climate data. In order to calculate the damage of blank area, it would be possible to use the automatic weather system (AWS), which provides data from more sites than the automated synoptic observing system (ASOS).

As nuclear power plants are operated in Korea, low and intermediate-level radioactive wastes and spent nuclear fuels are continuously generated. Due to the increase in the amount of radioactive waste generated, the demand for transportation of radioactive wastes in Korea is increasing. This can have radiological effect for public and worker, risk assessment for radioactive waste transportation should be preceded. Especially, if the radionuclides release in the ocean because of ship sinking accident, it can cause internal exposure by ingestion of aquatic foods. Thus, it is necessary to analyze process of internal exposure due to ingestion. The object of this study is to analyze internal exposure by ingestion of aquatic foods. In this study, we analyzed the process and the evaluation methodology of internal exposure caused by aquatic foods ingestion in MARINRAD, a risk assessment code for marine transport sinking accidents developed by the Sandia National Laboratory (SNL). To calculate the ingestion internal exposure dose, the ingestion concentrations of radionuclides caused by the food chain are calculated first. For this purpose, MARINRAD divide the food chain into three stages; prey, primary predator, and secondary predator. Marine species in each food chain are not specific but general to accommodate a wide variety of global consumer groups. The ingestion concentrations of radionuclides are expressed as an ingestion concentration factors. In the case of prey, the ingestion concentration factors apply the value derived from biological experiments. The predator's ingestion concentration factors are calculated by considering factors such as fraction of nuclide absorbed in gut, ingestion rate, etc. When calculating the ingestion internal exposure dose, the previously calculated ingestion concentration factor, consumption of aquatic food, and dose conversion factor for ingestion are considered. MARINRAD assume that humans consume all marine species presented in the food chain. Marine species consumption is assumed approximate and conservative values for generality. In the internal exposure evaluation by aquatic foods ingestion in this study, the ingestion concetration factor considering the food chain, the fraction of nuclide absorbed in predator’s gut, ingestion rate of predator, etc. were considered as influencing factors. In order to evaluate the risk of maritime transportation reflecting domestic characteristics, factors such as domestic food chains and ingestion rate should be considered. The result of this study can be used as basis for risk assessment for maritime transportation in Korea.

After Fukushima nuclear power plant accident in 2011, Concerns about accident of spent fuel pool increase. In Korea, the time of saturation of spent fuel pool is coming, but regulatory measures and safety evaluation are insufficient when occurring spent fuel pool accident. Thus, it is necessary to review of spent fuel pool accident in foreign countries to establish regulatory measures and safety evaluation of spent fuel pool accident suitable for domestic spent fuel pool. Therefore, we reviewed spent fuel pool accident that occurred at Fukushima Unit 4, SONGS Unit 2 and PAKS. In Japan, spent fuel pool accident occurred at Fukushima NPP in 2011. Tsunami was cause of the accident. Station Black Out occurred at Fukushima NPP and Emergency Diesel Generator lost their functions due to Tsunami. As a result, Loss of cooling happened in spent fuel pool at Fukushima NPP. For Unit 4, wall of spent fuel pool in Unit 4 was damaged due to hydrogen explosive, so loss of coolant in spent fuel pool of Unit 4 occurred. After the accident, the temperature of spent fuel pool increases to 75°C, but there was no damage to the spent fuel. In USA, spent fuel pool accident occurred at SONGS Unit 2 in 2013. The debris of nearby ocean is cause of the accident. The debris entered the system through a damaged Salt Water Cooling pump suction strainer. The debris obstructed flow through the Component Cooling Water heat exchanger and operation of Salt Water Cooling. The maximum spent fuel pool temperature during this event was 25.6°C. It was a value that satisfied the technical specifications of the SONGS NPP. In Ukraine, spent fuel pool accident occurred at PAKS in 2003. Unintentionally opened valve of cleaning tank is cause of the accident. Loss of coolant occurred in spent fuel pool of PAKS. Due to loss of coolant, spent fuels were exposed to the vapor state atmosphere, and oxidation occurred in the cladding tube of the spent fuel that rose to 1,400°C. In this study, Review of spent fuel pool accident in major foreign countries was conducted as basic studies for establishing regulatory measures and safety evaluation of spent fuel pool in Korea. Causes of each accident were different by structure of spent fuel pools. Result of this study will be contributed to establish safety measures of spent fuel pool accident suitable for domestic spent fuel pool facility.

This study presents a rapid and quantitative radiochemical separation method for Nb isotopes in radioactive waste samples from the nuclear power plant with anion exchange resin after Fe coprecipitation. After radionuclides were leached from the radioactive waste samples with concentrated HCl and HNO3, the Nb isotopes were coprecipitated with Fe after filtering the leaching solution with 0.45 micron HA filter, while the Sr, Tc and Ni isotopes were in the solution. The Nb isotopes were separated in HCl medium with anion exchange resin. The purified Nb isotopes were measured using a low level liquid scintillation counter after installing quenching curve with standard Nb-94 isotopes. The separation method for Nb isotopes investigated in this study was applied to neutron dosimeter samples from the nuclear power plant after validating the Nb activity concentration with gamma spectrometry system.

For safe management of spent nuclear fuels, they should be delivered to repository or waste disposal site. As the amount of spent nuclear fuel transportation is expected to increase in the future due to the provision of an intermediate storage facility, the necessity to secure transportation cask is emerging. In order to secure the spent nuclear fuel transportation cask, it is necessary to analyze the regulatory processes for domestic and foreign spent nuclear fuel transportation cask. In this study, the regulatory processes for domestic and foreign spent nuclear fuel transportation cask was analyzed. In this study, the IAEA, US, and Korea spent nuclear fuel transportation cask regulatory processes were analyzed. The domestic and foreign spent nuclear fuel transportation cask regulatory processes consist of design phase, manufacturing phase, and operation phase. In the design stage, the transport requirements are designed in accordance with the safety requirements of international organizations and countries. The application to be submitted when applying for approval should include a safety analysis report, evidence proving compliance with safety requirements et al. In the manufacturing stage, it is a stage to check whether the safety requirements are satisfied before the first use after manufacturing the transportation cask. Inspections include welding inspection, leakage inspection, shielding inspection, and thermal inspection. In the operation stage, it is a stage of periodically performing inspections for continuous maintenance of the package when the transportation cask is used. The inspection items to be performed are similar to the manufacturing stage and typically include performance inspection of components and leakage inspection. In this study, domestic and foreign spent nuclear fuel transportation cask regulatory processes were analyzed. It was found that the domestic and foreign spent nuclear fuel transportation cask regulatory processes consist of the design phase, the manufacturing phase, and the operation phase. The results of this study can be used as basic data for policy decision-making for the spent nuclear fuel cask.

In Korea, research on the introduction of dry storage facility is being conducted as an alternative to saturation of temporary storage facilities for spent nuclear fuel. The introduction of dry storage facilities requires a radiological impact assessment on the workers of the facility, and for this, an appropriate exposure scenario must be derived through work procedure analysis. In this study, the procedure for storing spent nuclear fuel in dry storage facilities was analyzed based on the case of evaluating the radiological impact of workers in dry storage facilities abroad. We investigated cases of radiological impact assessment on workers at on-site dry storage facilities by PNNL, Dominion, and P. F. Weck. PNNL and Dominion analyzed the storage work procedure of the VSC (Vertical Storage Cask) method using CASTOR V/21, TN-32, respectively, and conducted a radiological impact assessment. P. F. Weck analyzed the storage work procedure of various spent nuclear fuel casks for VSC and HSM (Horizontal Storage Module), conducted a radiological impact assessment. As a result of comparing the procedure for storing spent nuclear fuel by case, it was found that the storage procedure was determined by the storage method and the cask type. In the case of VSC method, canister-type casks and basket-type casks are used, and the storage procedure are partially different according to each. Canister-type cask requires repackaging from transfer overpack to storage overpack, but basket-type cask doesn’t require that procedure. In the case of the HSM method, only the canister type cask was found to be used. However, the storage procedure was different depending on the type of HSM system. Depending on the type of HSM system, the necessity of cask for on-site transport was different. In this study, we investigated and analyzed the work procedure according to the storage method of dry storage facilities abroad. It was found that the dry storage procedure of spent nuclear fuel different according to the storage method and type of cask. The results of this study can be used as basic when deriving the exposure scenario for spent nuclear fuel dry storage workers suitable for the domestic situation.