Currently, KHNP-CRI has developed 100 kW plasma torch melting facility to reduce the amount of radioactive waste in nuclear power plant. Plasma torch melting technology uses electric arc phenomena like lightning to melt the target material at a high temperature of about 1,600°C. The technology is applicable to treatment for various types of waste such as combustible, non-combustible and mixed wastes. The volume reduction ratio by the technology is respectively expected to be about 1/60 of combustible wastes and about 1/5 for non-combustible wastes. It is important to discharge the melt without problems in the melting technology. In general, molten slag has properties such as high viscosity and quick solidification. Because of the properties, when discharging into slag container, the final product is accumulated like a mountain. To improve this problem, there is three suggestions; 1) rotation of the slag container, 2) vibration of the slag container, and 3) heating of the slag container.

Plasma torch melting has been considered as a promising treatment technology for radioactive waste generated by nuclear power plants. The IAEA reported in 2006, the plasma melting technology could be treated regardless of the type of radioactive wastes such as combustible, non-combustible and liquid. Also, the technology has the advantage of being an eco-friendly technology. It emits less harmful gases such as NOx, SOx, HCl and CO because it does not use fossil fuels. In KHNP CRI, the plasma torch melting system was developed as the new radioactive waste treatment technology. In this study, to evaluate the long-term integrity of the new facility, a demonstration test with concrete as a simulant was carried out for about 3 days. For the 3 days, the evaluation was conducted in view of abnormal shutdown, soundness of waste feeding device, electrode consumption, and so on.

In KHNP CRI, the PTMs (plasma torch melting system) was developed as a treatment technology of a wide variety of radioactive wastes generated by nuclear power plants. The facility is made of melting zone, thermal decomposition zone, melt discharge zone, waste feeding device, MMI, and offgas treatment system. In this study, demonstration test was conducted using NaOH solution as liquid waste to evaluation the applicability of the PTM system. For demonstration test of NaOH solution treatment, the plasma melting zone is sufficiently pre-heated by the plasma torch for 5 hours. The temperature inside the plasma melting zone is about 1,600°C. The NaOH solution as simulant was put into the thermal decomposition zone by the spray feeding device with the throughput of maximum 30 liter/hour. During the test, the power of plasma torch is about 100 kW on the transferred mode. The 160 liters of liquid waste was treated for 500 minutes. After the demonstration test, the final product in the form of salt was remained in the melting zone, and the disposal of the final product are still under consideration.

The stabilization techniques are highly required for damaged nuclear fuel to strengthen safety in terms of transportation, storage, and disposal. This technique includes recovering fuel materials from spent fuel, fabrication of stabilized pellets, and fabrication of fuel rods. Thus, it is important to identify the leaching behavior of the stabilized pellets to verify their stability in humid environments which are similar to storage conditions. In this study, we introduce various leaching experiment methods to evaluate the leaching behavior of the stabilized pellets, and determine the most suitable leaching test methods for the pellets. Also, we establish the leaching test conditions with various factors that can affect the dissolution and leaching behavior of the stabilized pellets. Accordingly, we prepare the simulated high- (55 GWd/tU) and low- (35 GWd/tU) burnup nuclear fuel (SIMFUEL) and pure UO2 pellets sintered at 1,550°C and 1,700°C, respectively. Each pellet is placed in a vessel and filled with DI water and perform the leaching test at three different temperature to verify the leaching mechanism at different temperature range. Based on the standard leaching test method (ASTM C1308-21), the test solution is removed from the pellet after specific time intervals and replaced in the fresh water, and the vessel is placed back into the controlled-temperature ovens. The test solutions are analyzed by using ICP-MS.

When damaged nuclear fuel is stripped and re-fabricated into stabilized pellets, it is necessary to analyze the characteristics of the stabilized pellets, such as density, leaching behavior, and compressive strength, for final disposal. In this study, simulated nuclear fuel with UO2 and burn-up of 35 GWd/tU and 55 GWd/tU was used to measure the compressive strength of the stabilization pellet. In order to change the density of the sintered pellet, a sintered pellet was prepared by heat treatment at 1,550°C and 1,700°C for 6 hours in a reducing atmosphere of 4% H2/Ar. In the case of UO2, the density was 10.4 g/cm3 (94.5% of T.D.) and 10.6 g/cm3 (96.6% of T.D.) depending on the sintering temperature (1,550°C, 1,700°C). In the case of simulated fuel with a burn-up of 35 GWd/tU, the density was 8.8 g/cm3 (80.9% of T.D.) and 10.2 g/cm3 (93.6% of T.D.) depending on the sintering temperature (1,550°C, 1,700°C). In the case of simulated fuel with a burn-up of 55 GWd/tU, the density was 8.3 g/cm3 (77.0% of T.D.) and 10.0 g/cm3 (92.3% of T.D.) depending on the sintering temperature (1,550°C, 1,700°C). It was found that the compressive strength of simulated nuclear fuel decreased with increasing burn-up and increased with increasing density. In the case of UO2, the compressive strengths were 717.8 MPa and 897.4 MPa when the densities were 10.4 g/cm3 and 10.6 g.cm3, respectively. In the case of simulated nuclear fuel with a burn-up of 35 GWd/tU, the compressive strengths were 472.1 MPa and 732.3 MPa when the densities were 8.8 g/cm3 and 10.2 g/cm3. In the case of simulated nuclear fuel with a burn-up of 55 GWd/tU, the compressive strengths were 301.4 MPa and 515.5 MPa when the densities were 8.3 g/cm3 and 10.0 g/cm3, respectively.

Background: Studies using Smovey and Vibration foam rollers are mostly conducted with normal adults, breast cancer patients, and athletes. However, there are not many studies applied to stroke patients to date. Objectives: The purpose of this study is to investigate the effect of vibration exercise on the range of motion of the shoulder and knee joints in stroke patients. Design: A randomized controlled trial. Methods: A total of 36 stroke patients, with 12 in the Smovey and Vibration foam roller group (SVG), 12 in the Smovey and Non-Vibration foam roller group (SNVG), and 12 in the control group (CG) were randomly assigned to exercise three times a week for 6 weeks. The range of motion of the shoulder and knee joints was measured for each group before and after 6 weeks of exercise. For joint range of motion, shoulder flexion and extension and knee flexion and extension were measured using BPMpro. Results: In terms of the difference in time, the flexion and extension of the shoulder and the flexion and extension of the knee on the paretic side were significant in the SVG and SNVG. The CG was not significant. Shoulder flexion and extension and knee flexion and extension on the unaffected side were all insignificant. The differences between each group were significant between the SVG and the CG and the SNVG and the CG. SVG and SNVG were not significant. Conclusion: It was found that vibration exercise had a positive effect on the range of motion of the shoulder and knee joints. Therefore, it is thought that vibration exercise can be provided as a clinical intervention method for shoulder and knee range of motion.

To investigate the effect of the catalyst and metal–support interaction on the methane decomposition behavior and physical properties of the produced carbon, catalytic decomposition of methane (CDM) was studied using Ni/SiO2 catalysts with different metal–support interactions (synthesized based on the presence or absence of urea). During catalyst synthesis, the addition of urea led to uniform and stable precipitation of the Ni metal precursor on the SiO2 support to produce Ni-phyllosilicates that enhanced the metal–support interaction. The resulting catalyst upon reduction showed the formation of uniform Ni0 particles (< 10 nm) that were smaller than those of a catalyst prepared using a conventional impregnation method (~ 80 nm). The growth mechanisms of methane-decomposition-derived carbon nanotubes was base growth or tip growth according to the metal–support interaction of the catalysts synthesized with and without urea, respectively. As a result, the catalyst with Ni-phyllosilicates resulting from the addition of urea induced highly dispersed and strongly interacting Ni0 active sites and produced carbon nanotubes with a small and uniform diameter via the base-growth mechanism. Considering the results, such a Ni-phyllosilicate-based catalyst are expected to be suitable for industrial base grown carbon nanotube production and application since as-synthesized carbon nanotubes can be easily harvested and the catalyst can be regenerated without being consumed during carbon nanotube extraction process.

Livestock production costs are heavily influenced by the cost of feed, The use of domestically grown forages is more desirable for livestock feed production. As part of this study, triticale, which is an extremely palatable and easily cultivable crop in Korea, was used to produce low moisture silage bales with lactic acid bacteria (LAB) and then stored for different periods. We examined the nutrient content of silage, such as crude protein (CP), acid detergent fiber (ADF) and neutral detergent fiber (NDF), as well as their organic acids, including lactic acid, acetic acid, butyric acid, at different storage periods. The nutrient content of silages, such as crude protein, ADF, and NDF, did not change significantly throughout storage periods. Organic acid data indicated that lactic acid concentrations increased with increasing moisture contents and storage periods up to nine months. However, further extending storage to 12 months resulted in a reduction in the lactic acid content of all silages as well as an increase in their pH. Based on the present results, it suggested that the production of low moisture silage with the LAB may be able to preserve and maintain its quality without altering its nutritional composition. Also, the lactate content of the silage remained significant for at least nine months.

When decommissioning a nuclear power plant, the structure must be made to a disposable size. In general, the cutting process is essential when dismantling a nuclear power plant. Mainly, thermal cutting method is used to cutting metal structures. The aerosols generated during thermal cutting have a size distribution of less than 1 μm. The contaminated structures are able to generate radioactive aerosols in the decommissioning. Radioactive aerosols of 1 μm or less are deposited in the respiratory tract by workers’ breathing, causing the possibility of internal exposure. Therefore, workers must be protected from the risk of exposure to radioactive aerosols. Prior knowledge of aerosols generated during metal cutting is important to ensure worker safety. In this study, the physical and chemical properties of the aerosol were evaluated by measuring the number and mass concentrations of aerosols generated when cutting SUS304 and SA508 using the laser cutting method. High-resolution aerosol measuring equipment (HR-ELPI+, DEKATI) was used to measure the concentration of aerosols. The HR-ELPI+ is an impactor-type aerosol measuring equipment that measures the aerosol number concentration distribution in the aerodynamic diameter range of 6 nm to 10 um in real-time. And analyze the mass concentration of the aerosol according to the diameter range through the impactor. ICP-MS was used for elemental mass concentration analysis in the aerosol. Analytical elements were Fe, Cr, Ni and Mn. For the evaluation of physical and chemical properties, the MMAD of each element and CMAD were calculated in the aerosol distribution. Under the same cutting conditions, it was confirmed that the number concentration of aerosols generated from both materials had a uni-modal distribution with a peak around 0.1 um. CMAD was calculated to be 0.072 um for both SUS304 and SA508. The trend of the CMAD calculation results is the same even when the cutting conditions are changed. In the case of MMAD, it was confirmed that SUS304 had an MMAD of around 0.1 μm in size for only Fe, Cr and Mn. And SA508, Fe, Cr, Ni and Mn were all confirmed to have MMAD around 0.1 μm in size. The results of this study show that a lot of aerosols in the range of less than 1 μm, especially around 0.1 μm in size, are generated when metal is cut using laser cutting. Therefore, in order to protect the internal exposure of workers to laser metal cutting when decommissioning NPPs, it is necessary to protect from nano-sized aerosols beyond micron size.