본 연구에서는 중공사형 이산화탄소 분리막 모듈을 사용하여 수소개질기 배가스로부터 이산화탄소 포집을 목적 으로 한 분리막 공정 최적화 연구를 진행하였다. 랩스케일의 소형 분리막 모듈을 사용하여 혼합기체를 대상으로 이산화탄소 순도 90% 및 회수율 90%을 달성하는 2단 공정 조건을 도출하였다. 막 면적이 정해진 모듈의 분리막 공정에서는 스테이지-컷, 주입부 및 투과부 압력에 따라서 포집 순도 및 회수율이 모두 다르게 나타나기 때문에 운전 조건에 대한 최적화가 필수적이 다. 본 연구에서는 다양한 운전 조건에서 1단 분리막에서 보이는 공정 포집 효율의 한계를 확인하고, 높은 순도와 회수율을 동시에 달성하기 위한 2단 회수 공정을 최적화하였다.

In the design of a spent-fuel (SF) storage, the consideration of burnup credit brings the benefits in safety and economic views. According to it, various SF burnup measurement systems have been developed to estimate high fidelity burnup credit, such as FORK and SMOPY. Recently, there are a few attempts to localize the SF burnup measurement system in South Korea. For the localization of SF burnup measurement systems, it is very important to build the isotope inventory data base (DB) of various kinds of SFs. In this study, we performed DeCART2D/MASTER core follow calculations and McCARD single fuel assembly (FA) burnup analyses for Hanbit unit 3 and confirmed the characteristic of the isotope inventory over burnup. Firstly, the core follow calculations for Cycles 1~7 were performed using DeCART2D/MASTER code system. The core follow calculation is very realistic and practical because it considers the design conditions from its nuclear design report (NDR). Secondly, the Monte Carlo burnup analyses for single FAs were conducted by the McCARD Monte Carlo (MC) transport code. The McCARD code can utilize continuous energy cross section library and treat complex geometric information for particle transport simulation. Accordingly, the McCARD code can provide accurate solutions for burnup analyses without approximations, but it needs huge computing resources and time burden to perform whole-core follow calculations. Therefore, we will confirm the effectiveness of the single McCARD FA burnup analyses by comparing the DeCART2D/MASTER core follow results with the McCARD solution. From the results, the use of single FA burnup analyses for the establishment of the DBs will be justified. Various FAs, that have different 235U enrichments and loading pattern of fuel rods and burnable absorbers, were considered for the burnup analyses. In addition, the results of the sensitivity analyses for power density, initial enrichment, and cooling time will be presented.

In this study, an aerosol process was introduced to produce CaCO3. The possibility of producing CaCO3 by the aerosol process was evaluated. The characteristics of CaCO3 prepared by the aerosol process were also evaluated. In the CaCO3 prepared in this study, as the heat treatment proceeded, the calcite phase disappeared. The portlandite phase and the lime phase were formed by the heat treatment. Even if the CO2 component is removed from the calcite phase, there is a possibility that the converted CO2 component could be adsorbed into the Ca component to form a calcite phase again. Therefore, in order to remove the calcite phase, carbon components should be removed first. The lime phase was formed when CO2 was removed from the calcite phase, while the portlandite phase was formed by the introducing of H2O to the lime phase. Therefore, the order in which each phase formed could be in the order of calcite, lime, and portlandite. The reason for the simultaneous presence of the portlandite phase and the lime phase is that the hydroxyl group (OH−) introduced by H2O was not removed completely due to low temperature and/or insufficient heating time. When the sufficient temperature (900°C) and heating time (60 min) were applied, the hydroxyl group (OH−) was removed to transform into lime phase. Since the precursor contained the hydrogen component, it could be possible that the moisture (H2O) and/or the hydroxyl group (OH−) were introduced during the heat treatment process.

Uranium-235, used for nuclear power generation, has brought radioactive waste. It could be released into the environment during reprocessing or recycling of the spent nuclear fuel. Among the radioactive waste nuclides, I-129 occurs problems due to its long half-life (1.57×107 y) with high mobility in the environment. Therefore, it should be captured and immobilized into a geological disposal system through a stable waste form. One of the methods to capture iodine in the off-gas treatment process is to use silver loaded zeolite filter. It converts radioactive iodine into AgI, one of the most stable iodine forms in the solid state. However, it is difficult to directly dispose of AgI itself in an underground repository because of its aqueous dissolution under reducing condition with Fe2+. It must be immobilized in the matrix materials to prevent release of iodine as a result of chemical reaction. Among the matrix glasses, silver tellurite glass has been proposed. In this study, additives including Al, Bi, Pb, V, Mo, and W were added into the silver tellurite glass. The thermal properties of each matrix for radioactive iodine immobilization were evaluated. The glasses were prepared by the melt-quenching method at 800°C for 1 h. Differential scanning calorimetry (DSC) was performed to evaluate the thermal properties of the glass samples. From the study, the glass transition temperature (Tg) was increased by adding additives such as V2O5, MoO3, or WO3 in the silver tellurite glass. The relative electro-static field (REF) values of V2O5, MoO3, and WO3 are about three times higher than that of the glass network former, TeO2. It could provide sufficient electro-static field (EF) to the TeO2 interacting with the non-bridging oxygen forming Te-O-M (M = V, Mo, W) links. Therefore, the addition of V2O5, MoO3, or WO3 reinforced the glass network cohesion to increase the Tg of the glass. The addition of MoO3or WO3 in the silver tellurite glass increased Tg and crystallization temperature (Tc) with remaining the glass stability.

To reduce the environmental burden caused by the disposal of spent nuclear fuel and maximize the utilization of the repository facility, waste burden minimization technology is currently being developed at the Korea Atomic Energy Research Institute (KEARI). The technology includes a nuclide management process that can maximize disposal efficiency by selectively separating and collecting major nuclides in spent nuclear fuel. In addition, for efficient storage facility utilization, the short-term decay heat generated by spent nuclear fuel must be removed from the waste stream. To minimize the short-term thermal load on the repository facility, it is necessary to separate heat generating nuclides such as Cs-137 and Sr-90 from the spent fuel. In particular, Sr-90 must be separated because it generates high heat during the decay process. KAERI has developed a technology for separating Sr nuclides from Group II nuclides separated through the nuclide management process. In this study, we prepared Sr ceramic waste form, SrTiO3, by using the solid-state reaction method for long-term storage for the decay of separated Sr nuclides and evaluated the physicochemical properties of the waste form. Also, the radiological and thermal characteristics of the Sr waste form were evaluated by predicting the composition of Sr nuclides separated through the nuclide management process, and the estimation of centerline temperature was carried out using the experimental thermal data and steady state conduction equation in a long and solid cylinder type waste form. These results provided fundamental data for long-term storage and management of Sr waste.

본 연구에서는 기 선발한 Enterobacter asburiae ObRS-5 균주를 1×108 cfu mL-1 농도로 고추에 관주 처리했을 때 Phytophthora capsici에 의한 고추역병을 74.6% 방제하는 효과가 있었다. E. asburiae ObRS-5 균주에 의한 고추역병 방제 메커니즘을 확인하기 위해 고추의 PR1, PR4 및 PR10 유전자를 특이적으로 증폭하는 프라이머를 이용하여 quantitative PCR을 수행하였다. 그 결과 E. asburiae ObRS- 5 균주를 처리한 고추에서 대조구와 비교하여 상기 세 가지 유전자의 발현이 모두 높은 수준을 유지하였다. 또한 E. asburiae ObRS-5 균주는 고추의 생육을 억제하지 않으면서 ISR 반응을 유도하는 것으로 나타났다. 이러한 결과를 통하여 P. capsici이 침입할 때 E. asburiae ObRS-5 균주가 매개 하는 ISR 메커니즘을 통해 Phytophthora 역병의 제어가 가능한 것으로 사료된다.

In the current study, a total of 102 common Todarodes pacificus squid caught in the East Sea were investigated for parasitological research. The results revealed that 33 (32.35%) out of 102 squid were infected by Nybelinia surmenicola, the mean intensity was 5.58 parasites per squid, and the maximum abundance was 11. Morphological analysis using a field emission scanning electron microscope showed the characteristic features of N. surmenicola. Molecular identification based on the 28S rRNA gene confirmed the isolated parasite as N. surmenicola, while phylogenetic analysis revealed that N. surmenicola isolated in this study was clustered with N. surmenicola isolated from Japan. This is the first report of phylogenetic characterization of N. surmenicola isolated from Korea.

The squid Todarodes pacificus is a commercially important fishery species in East Asia. As East Asians consume raw or lightly cooked squids, there has been growing concern about parasitic infections associated with squid consumption. In the current study, five squids caught in the East Sea were sampled for parasitological research from the biggest fishery market in Seoul, Republic of Korea. They were dissected and examined for parasites using a light microscope. Proteocephalus sp. was isolated and identified using field emission scanning electron microscopy, PCR, and sequencing. Given that Proteocephalus spp. can be affected by water temperature and geographical characteristics, further research on Proteocephalus spp. with respect to changes in water temperature in the East Sea is important.

본 연구는 기존 기술수용모형에서 제시한 인지된 유용성과 인지된 용이성뿐만 아니라 개인의 특성과 성향이 새로운 기술수용에 매우 중요한 요인으로 작용할 것으로 예측하였다. 이에 인지된 유용성, 인지된 용이성과 함께 개인의 성격적 차원에서 외향적 성격, 내향적 성격, 개혁성향을 개인의 특성적 차원에서 자기효능감, 자아존중감을 IPTV나 디지털 전환 수용에 영향을 미치는 요인으로 설정하여 설문조사 후 분석하였다. 분석결과 인지된 유용성, 내향적 성격, 자아존중감이 IPTV 수용 태도에 영향을 미치는 것으로 나타났으며, IPTV 수용태도는 IPTV 수용의도에 유의미한 영향을 미치는 것으로 나타났다. 또한 디지털 전환 수용에 영향을 미치는 요인으로는 인지된 유용성, 인지된 용이성, 외향적 성격, 내향적 성격 그리고 개혁성향으로 나타났다. 디지털 전환 수용태도 역시 의도에 유의미한 영향을 미치는 것으로 나타났다.