본 연구는 54일 동안 관수량과 오이(‘아시아 은천 F1’)의 생 육, 줄기 수액 흐름, 광합성 특성, 수분 이용 효율에 대한 상대 습도(RH)와 광도의 영향을 평가하였다. 오이는 토양 화분에 서 재배되었으며, 토양 수분 장력계로 자동 제어(－10kPa) 하 여 EC 1.5dS m-1의 양액을 1회 주당(per plant) 265mL 공급하 였다. 처리는 세 조건으로 광도 200μmol·m-2·s-1에 가습 처리 구(HL)와 무가습의 대조구(Control), 광도 350μmol·m-2·s-1 에 가습 처리구(HH)로 설정하였다. 주간(weekly) 평균 RH는 가습 처리구에서 79.5%(VPD 2.4kPa), 무가습 처리구에서 65.5%(VPD 4.0kPa)이었고, 평균 온도는 모든 처리구에서 25℃이었다. 총관수 횟수는 대조구에서 29회, HL처리구에 서 26회, HH처리구에서 27회이었다. HH처리구에서 초장과 마디 수, 엽 생육, 줄기 직경에서 생장이 컸으며, HH처리구에 서 광합성률이 더 높았고, 대조구에서 증산률이 더 높았다. 주 간 엽온은 HH처리구에서 28℃, HL처리구에서 26℃, 대조구 가 23℃였으며, 엽기온차는 HH처리구에서 2℃, HL처리구 에서 0℃, 대조구에서 －3℃ 이였다. 모든 처리구에서 줄기 수액흐름(SFRR)은 광의 유무와 토양수분장력에 영향을 받 아 광주기 시작 전 10%(HH, Control)－30%(HL)에서 광주 기 시작 이후 60%(HH)－90%(Control)로 상승하였고, 관수 후 SFRR은 20－30% 상승폭을 나타냈다. 광 조사 동안 평균 SFRR은 대조구에서 88.5%로 가습처리구보다 높은 경향이 었다. 이상의 결과 오이 토양 포트재배에서 토양수분장력 －10kPa 관수제어시 처리구의 토양 수분장력은 차이가 없음 에도 불구하고 적정 VPD가 유지되면 오이의 생육과 암꽃발 생률이 높았고 광주기 동안 엽기온차, 관수영향은 SFRR에 영 향을 주었다.

Hydrogen peroxide (H2O2) is widely used in bleaching treatments in the pulp and paper industry, in wastewater treatment, and as a food additive. However, H2O2 solutions are unstable and decompose slowly when subjected to external factors such as light, high temperatures, or metal compounds. Therefore, a simple and reliable method to measure the concentration of H2O2 is required for its proper use in various applications. We determined the concentration of an H2O2 solution by measurement at a single wavelength (249 nm) without any reagents or complex analytical procedures. In the present work, the measurable concentration of H2O2 was as low as 0.015 wt% (4.41 mM) and as high as 0.300 wt% (88.2 mM), with high linearity (99.99% at 249 nm) between the concentration of H2O2 and the optical density (OD) values. In addition, the method could be used to measure the concentration of H2O2 in a peracetic acid solution without interference from acetic acid and peracetate ion.

국립원예특작과학원에서는 밝은 화색과 안정적인 화형의 생 육이 우수한 빨간색 스탠다드 장미 품종을 육성하기 위해 진한 적색 스탠다드 장미 품종 ‘엔드리스러브(Endless Love)’를 모 본으로, 꽃잎수가 많고 안정적으로 가시가 적은 밝은 노란색 ‘페니레인(Penny Lane)’ 품종을 부본으로 인공교배하였다. 37 개의 교배실생을 양성해 1, 2, 3차에 걸친 특성검정 및 현장실증 을 통해 꽃이 크고 화형이 안정적이며, 재배안정성 및 생산성, 절화특성이 우수한 ‘원교 D1-390’을 최종 선발하였다. 2023년 ‘루비레드(Ruby Red)’로 명명하여 국립종자원에 품종보호출원·등록되었다. ‘루비레드’ 품종은 밝은 적색(R53C)을 가졌으 며, 꽃잎수가 32.8매, 화폭과 화고는 각각 10.9, 5.9cm로 대조 품종보다 크다. 절화장은 평균 71.7cm, 절화수명은 약 16.7일, 수량은 연간 168대/m2로 대조품종인 ‘레드스퀘어(Red Square)’ 대비 절화장이 길고 절화수명도 2배 이상 길며, 수확량도 1.4배 우수하다. 2023년 국내 육성 장미 품종 서울식물원 관람객 대상 공동평가회에서 스탠다드 장미 중 우수한 평가를 받았으며, 현 장 실증 결과 농가별로 균일하고 우수한 수량과 절화품질을 보 였다. 절화용 장미 ‘루비레드’ 품종은 밝은 적색과 우수한 화형 을 가지는 품종으로 해외 대체 품종으로 국내에서 많이 재배될 것으로 기대된다.

The domestic Pressurized Heavy Water Reactor (PWHR) nuclear power plant, Wolsong Unit 1, was permanently shut down on December 24, 2019. However, research on decommissioning has mainly focused on Pressurized Water Reactors (PWRs), with a notable absence of both domestic and international experience in the decommissioning of PHWRs. If proper business management such as radiation safety and waste is not performed, it can lead to increased business risks and costs in decommissioning. Therefore, the assessment of waste volume and cost, which provide fundamental data for the nuclear decommissioning process, is a crucial technical requirement before initiating the actual decommissioning of Wolsong Unit 1. Decommissioning radiation-contaminated structures and facilities presents significant challenges due to high radiation levels, making it difficult for workers to access these areas. Therefore, technology development should precede decommissioning process assessments and safety evaluations, facilitating the derivation of optimal decommissioning procedures and ensuring worker safety while enhancing the efficiency of decommissioning operations. In this study, we have developed a program to estimate decommissioning waste amounts for PHWRs, building upon prior research on PWR decommissioning projects while accounting for the specific design characteristics of PHWRs. To evaluate the amount of radioactive waste generated during decommissioning, we considered the characteristics of radioactive waste, disposal methods, packaging container specifications, and the criteria for the transfer of radioactive waste to disposal operators. Based on the derived algorithm, we conducted a detailed design and implemented the program. The proposed program is based on 3D modeling of the decommissioning components and the calculation of the Work Difficulty Factor (WDF), which is used to determine the time weighting factors for each task. Program users can select the cutting and packaging conditions for decommissioning components, estimate waste amount based on the chosen decommissioning method, and calculate costs using time weighting factors. It can be applied not only to PHWRs, but also to PWRs and non-nuclear fields, providing a flexible tool for optimizing decommissioning process.

The decommissioning of Korea Research Reactor Units 1 and 2 (KRR-1&2), the first research reactors in South Korea, began in 1997. Approximately 5,000 tons of waste will be generated when the contaminated buildings are demolished. Various types of radioactive waste are generated in large quantities during the operation and decommissioning of nuclear facilities, and in order to dispose of them in a disposal facility, it is necessary to physico-chemically characterize the radioactive waste. The need to transparently and clearly conduct and manage radioactive waste characterization methods and results in accordance with relevant laws, regulations, acceptance standards is emerging. For radioactive waste characterization information, all information must be provided to the disposal facility by measuring and testing the physical, chemical, and radiological characteristics and inputting related documents. At this time, field workers have the inconvenience of performing computerized work after manually inputting radioactive waste characterization information, and there is always a possibility that human errors may occur during manual input. Furthermore, when disposing of radioactive waste, the production of the documents necessary for disposal is also done manually, resulting in the aforementioned human error and very low production efficiency of numerous documents. In addition, as quality control is applied to the entire process from generation to treatment and disposal of radioactive waste, it is necessary to physically protect data and investigate data quality in order to manage the history information of radioactive waste produced in computerized work. In this study, we develop a system that can directly compute the radioactive waste characterization information at the field site where the test and measurement are performed, protect the stored radioactive waste characterization data, and provide a system that can secure reliability.

This study was conducted in an indoor cultivation room and chamber where environmental control is possible to investigate the effect of temperature and irrigation interval on photosynthesis, growth and growth analysis of potted seedling cucumber. The light intensity (70 W·m-2) and humidity (65%) were set to be the same. The experimental treatments were six combinations of three different temperatures, 15/10℃, 25/20℃, and 35/25°C, and two irrigation intervals, 100 mL per day (S) and 200 mL every 2 days (L). The treatments were named 15S, 15L, 25S, 25L, 35S, and 35L. Seedlings at 0.5 cm in height were planted in pots (volume:1 L) filled with sandy loam and treated for 21 days. Photosynthesis, transpiration rate and stomatal conductance at 14 days after treatment were highest in 25S. These were higher in S treatments with a shorter irrigation interval than L treatments. Total amount of irrigation water was supplied evenly at 2 L, but the soil moisture content was highest at 15S and lowest at 25S > 15L > 25L, 35S and 35L in that order. Humidity showed a similar trend at 15/10℃ (61.1%) and 25/20℃ (67.2%), but it was as high at 35/25°C (80.5%). Cucumber growth (plant height, leaf length, leaf width, chlorophyll content, leaf area, fresh weight and dry weight) on day 21 was the highest in 25S. Growth parameters were higher in S with shorter irrigation intervals. Yellow symptom of leaf was occurred in 89.9% at 35S and 35L, where the temperature was high. Relative growth rate (RGR) and specific leaf weight (SLA) were high at 25/20℃ (25S, 25L), RGR tended to be high in the S treatment, and SLA in the L treatment. Water use efficiency (WUE) was high in the order of 25S, 25L > 15S > 15L, 35S, and 35L. As a result of the above, the growth and WUE were high at the temperature of 25/20℃.

The inclusion of conductive carbon materials into lithium-ion batteries (LIBs) is essential for constructing an electrical network of electrodes. Considering the demand for cells in electric vehicles (e.g., higher energy density and lower cell cost), the replacement of the currently used carbon black with carbon nanotubes (CNTs) seems inevitable. This review discusses how CNTs can contribute to the development of advanced LIBs for EVs. First, the reason for choosing CNTs as a conducting agent for the cathode is discussed in terms of energy density. Second, the reinforcing effect of CNTs on the anode is described with respect to the choice of silicon as the active material. Third, the development of water-based cathode fabrication as well as dry electrode fabrication with aid of CNTs is discussed. Fourth, three technical hurdles, that is, the price, dispersion issue, and entrapped metal impurities, for widespread use of CNTs in LIBs are discussed.

The objective of this experiment was to investigate the effect of drip irrigation volume on tomatoes (Solanum lycopersicum L.) grown in a greenhouse using perlite medium. Plants were treated by three different irrigation treatment I0, I25, and I50 (where irrigation volume of I25 and I50 was 25% and 50% higher than I0, having limited or no leaching). Growth characteristics of plants, yield and water use efficiency were measured. The result showed that plant height, leaf length and leaf width were lowest in the I0 treated plants. However, these parameters were not statistically significant differences between the plants that were grown in the I25 and I50 treatment. Soluble solids content, acidity and dry matter of 111th, 132nd, and 143rd days harvested tomato were higher in the plants irrigated with lowest volume (I0) than the higher volume (I25 or I50). In addition, water content was lower in the 111th and 132nd days of harvested tomatoes from the I0 treatment. The number of big-size tomatoes (>180 g) was significantly higher in the I25 irrigated plants. There was no significant difference in the total number of harvested fruits among the treatments. The average fruit weight and total yield of harvested tomatoes were lowest in the I0 treated plants. The water consumption of tomato was not significantly different amongst the treatments but water use efficiency was lowest in the I0 treatment. Principal component analysis revealed that total soluble solid and acidity of tomato showed a positive correlation between each other. These results suggest that I25 was the optimum irrigation treatment for tomato based on its measured growth characteristics, yield and water use efficiency.

The number of dismantled nuclear facilities is increasing globally. Dismantling of nuclear facilities generates large amount of waste such as concrete, soil, and metal. Concrete waste accounts for 70% of the total amount of waste. Since hundreds of thousansds of tons of concrete waste generated, securing technology of reduction and recycling of waste is emerging as a very important issue. The objective of this study is to synthesize geopolymer using inorganic materials from cement fine powder in concrete waste. Dismantled concrete waste contains a large amount of calcium silicate hydrate(C-S-H), Ca(OH)2, SiO2, etc., which is an inorganic material required for the synthesis of geopolymer. SiO2 affects the compressive strength of the geopolymer and Ca(OH)2 affects the curing rate. A high concentration of alkali solution is used as an alkali activator, and alkali activator is necessary for the polymerzation reaction of metakaolinite. The experiment consists of three steps. The first step is to react with concrete waste and hydrochloric acid to extract ions. In the solid after filtration, SiO2 and Al2O3 are composed of 84.10%. It can be used instead of commercial SiO2 required for the synthesis of geopolymer. The second step is to add NaOH up to pH 10, impurities can be removed to extract Ca(OH)2 with high purity. The final step is to add NaOH up to pH 13, and Ca(OH)2 extraction. The alkali solution generated after the last reaction can be recycled into an alkali activator during the synthesis of the geopolymer. If dismantled concrete waste is recycled during geopolymer synthesized, the volume reduction rate of dismantled concrete waste is more than 50%. If you put the radioactive waste in the recycled solidification materials synthesis from concrete waste by dismantling of nuclear facilities, it is possible to reduce the amount of waste generated and disposal costs.

털부처꽃(Lythrum salicaria L.)은 전국에 분포하는 다년생 초본식물로 척박하고 습한 지역을 포함한 다양한 환경에서 잘 자라는 것으로 알려져 있다. 따라서 하천변, 척박지에서 정원 용, 화훼용 및 관상용 식물로 이용이 가능하다. 본 연구는 털 부처꽃의 적정 육묘 조건(토양종류, 플러그 트레이 셀 크기,파종립수, 액비농도 및 차광)을 조사하였다. 대조구(원예상토) 에서 재배된 유묘의 생육이 가장 우수하였다. 반면 피트모스 와 펄라이트의 혼합용토는 육묘기간이 지속되면서 생육수치 가 감소하는 경향을 나타냈다. 셀 크기는 용적이 가장 큰 162 셀에서 재배된 유묘의 생육이 우수하였으나, 200셀과 288셀에 서 자란 묘도 건강했다. 한편 유묘의 결주발생을 고려하면 셀 당 2립을 파종하는 것이 적합하였다. 액비 처리는 유묘의 생 육을 촉진하였다. 특히 Hyponex 1000배는 초장, 줄기직경, 엽수, 마디수, 근장, 지상부 생체중 및 지하부 생체중을 증가 시켰다. 또한 유묘의 생육은 55% 차광 하에서 우수하였다. 따 라서 털부처꽃의 가장 효과적인 생육조건은 원예상토가 충진 된 288셀 플러그 트레이에 셀 당 2립을 파종하고 Hyponex 1000배를 시비하면서 55% 차광 하에서 재배하는 것이었다.

Lysophosphatidic acid (LPA) is a bioactive lipid messenger involved in the pathogenesis of chronic inflammation and various diseases. Recent studies have shown an association between periodontitis and neuroinflammatory diseases such as Alzheimer’s disease, stroke, and multiple sclerosis. However, the mechanistic relationship between periodontitis and neuroinflammatory diseases remains unclear. The current study found that lysophosphatidic acid receptors 1 (LPAR1) and 6 (LPAR6) exhibited increased expression in primary microglia and astrocytes. The primary astrocytes were then treated using medium conditioned to mimic periodontitis through addition of Porphyromonas gingivalis lipopolysaccharides, and an increased nitric oxide (NO) production was observed. Application of conditioned medium from human periodontal ligament stem cells with or without LPAR1 knockdown showed a decrease in the production of NO and expression of inducible nitric oxide synthase and interleukin 1 beta. These findings may contribute to our understanding of the mechanistic link between periodontitis and neuroinflammatory diseases.

As the number of aging nuclear power plants increases, the market for dismantling nuclear power plants is growing rapidly. About 40% of the cost of dismantling nuclear power plants is the waste treatment cost incurred during the dismantling process, of which concrete waste accounts for a significant portion of the total waste. Securing technology for reducing and recycling concrete waste is very important not only in terms of economy but also in terms of environment. The objective is to synthesize geopolymer using inorganic materials from cement fine powder in concrete waste. Cement fine powder in concrete waste has a large amount of inorganic elements necessary for filing materials for radioactive waste treatment such as CaO and SiO2. In particular, Ca(OH)2 is synthesized by extracting Ca2+ from concrete waste. It can be used as an alkali activator to synthesize geopolymer. The mortar from crushed concrete was used as a source of calcium. The first step is to react with concrete waste and hydrochloric acid to extract ions. The second step is to react with NaOH and synthesize Ca(OH)2. The product was divided into two stages according to the reaction method and order. The first and second products were washed and dried, and then XRD and XRF were performed. The second product was matched only Ca(OH)2 and CaCO3 at the XRD peak. In the case of XRF, it was analyzed to have a purity of 67.80–78.73%. Synthesis of geopolymer by recycling materials extracted from concrete waste can reduce disposal costs and improve the utilization rate of disposal sites.

비모란 선인장 ‘Ahwang’ 품종이 2016년에 국립원예특작과 학원에서 육성되었다. 증식력이 우수한 밝은 황색 ‘Ahwang’ 품종 육성을 위해서, 황색 ‘Hwangun’품종을 모본으로, 황색 ‘0930001’ 계통을 부본으로 하여 2012년 6월 25일에 교배하였다. 어린 비모란 선인장을 2014년 이전에 삼각주에 2번 접목하여 계통을 양성하였으며 2014년부터 2016년까지 총 3회에 걸쳐 생육특성을 조사하였다. ‘Ahwang’ 품종의 모구는 편원형 모양에 황색 구색(Y9A)이다. 모구는 평균 8.6개의 능(rip)과 2.7mm의 짧은 직립형 회색 가시를 가지고 있고 혹(tubercle)이 돌출된 형태를 띠고 있다. 10개월 재배 후 ‘Ahwang’ 품종의 구직경은 44.5mm였으며 자구는 평균 26.9개가 생성되었다. ‘Ahwang’ 품종은 모구 능마다 황색의 자구가 3-4개가 착생되었다. 2016년 육성계통 평가회에서 ‘Ahwang’ 품종은 기호도 점수 3.9을 받았다. 이 품종은 2018년 5월 16일 국립종자원에 등록되었으며 식물신품종보호법에 의해 품종보호(등록번호 7193)를 받게 되었다.