연안 해역에서 소형 선박의 프로펠러 고장으로 인한 사고가 지속적으로 발생하고 있다. 특히, 해상부유물(폐그물 및 로프 등)에 의하여 선박 프로펠러가 감기는 사고가 빈번히 일어나고 있다. 선박 프로펠러 감김 사고는 동력 상실로 인한 선박의 운항 지연 및 표류로 인한 1차 사고와 프로펠러에 감긴 로프을 제거하기 위한 잠수 작업등으로 인한 2차 사고의 우려가 있다. 이러한 빈번한 프로펠러 감김 사 고에도 불구하고 문제를 해결할만한 적절한 도구가 없어 선박을 육상으로 인양하여 수리하거나, 잠수부가 직접 선박 아래로 잠수하여 문제를 해결하고 있는 실정이다. 이에 따라, 최근 선박 프로펠러 감김 사고를 예방하기 위해 프로펠러 샤프트에 로프절단장치를 일부 소형 선박에 장착하고 있으나 비교적 높은 설치비용 및 시간이으로 인하여 원활하게 적용되어지지 않는 것으로 판단된다. 본 연구에서는 이러한 문제점을 해결하기 위해 기계톱 원리를 이용한 간단한 구조를 가진 수중절단기 기구 설계 및 제어기 개발을 수행하였다. 수중절단 기의 톱날은 직선왕복동작을 위해 유성기어와 크랭크핀을 사용함으로써 긴 행정을 가질 수 있도록 하였다. 또한 수중절단기는 소형 선박에 비치되어있는 배터리를 이용하여 작동시킬 수 있도록 하였다. 또한, 비전문가인 사용자가 보다 편리하고 안전하게 사용할 수 있도록 역전류 방지 및 속도제어회로를 적용하여 편리성 및 안정성을 확보하였다.

This study was conducted to examine the effect of fermented alcoholic feedstuff (FAF), sustained-release recombinant bovine somatotropin(rBST) on growth performance and body size of Korean native cattle, Hanwoo. The experiment was carried at the Livestock Breeding Station in Kangwon-do with fourteen bulls of two groups, control and treatment. Seven bulls per each group were allocateed. In control group, bulls were treated with total mixed ration(TMR) for the whole experimental periods. In treatment group, bulls were treated with TMR+FAF+rBST for the fattening period and TMR+FAF for the finishing period, respectively. The results are summarized as follows ; Average daily gains(ADG) of control and treatment groups were 0.86 and 1.11kg during the fattening period. ADG of treatment group were 29.1% higher than that of control group. For the whole experimental period, the fattening period and finishing period, ADG in control and treatment groups were 0.69 and 0.79kg, respectively, which shows 14.5% improvement of ADG in treatment group. Dry matter intake(DMI) was higher in treatment group than in control group during the finishing, fattening or whole experimental period. Feed conversion efficiencies in fattening period were 8.65 for control group and 6.93 for treatment group which shows improving 19.9% of feed conversion efficiency for treatment group, while 12.38 for control group and 14.48 for treatment group in finishing period. There were no significant differences between control and treatment group in feed conversion efficiency for the whole experimental period. Overall results indicate that the favorable feeding system to produce growth performance is TMR+FAF+rBST feeding during the fattening period and TMR+FAF feeding in treatment during the finishing period.

This study was performed to examine the effects of recombinant bovine somatotropin (rBST) and fermented alcoholic feedstuff(FAF) on blood metabolites, carcass characteristics and profitability. Sixteen Hanwoos(bulls; 8, steers; 8) with average 143㎏ of body weight were randomly assigned to bull control group(BC), steer control group(SC), bull group(BrA) treated with rBST and FAF, and steer group(SrA) treated with rBST and FAF. Sustained release rBST(0.03㎎/㎏/body weight) was administered biweekly and dose of rBST was adjusted monthly according to body weight increase. The blood glucose content was higher in the groups treated with rBST and FAF than control groups. The blood cholesterol contents tended to be lower in the treatment groups (BrA, 120.5 mg/dl; SrA, 104.0 mg/dl) than in the control groups (BC, 141.0 mg/dl; SC, 125.5 mg/dl). No significant difference between the groups of bulls and steers were found in the blood triglyceride concentrations as well as the albumin contents. The rib eye area of BC and BrA were 70 and 72 cm2, respectively, which are slightly larger than the area of SC and SrA. The treatment did not affect the backfat thickness both in bulls and steers. The marbling scores of BC and BrA appeared as No. 1 and No. 2, respectively, and No. 3 and No. 4 were obtained in SC and SrA. Lower non saturate fat concentrations were observed in the treatment groups (BrA, 64.30%; SrA, 59.59) than in control groups (BC, 58.98%; SC, 58.09%). Saturated fatty acids and amino acids contents were slightly more improved in the treatment than in the control. Average auction prices of BC and BrA were 7,900 and 8,089 wons per 1kg of carcass, respectively, whereas the prices of SC and SrA were 9407 and 9866 wons per 1kg of carcass, respectively. It is concluded that the treatment with rBST and FAF can improve the growth performance such as marbling scores and rib eye area and increase the auction prices.

This study was carried out to compare the effect of dietary zinc gluconate, fructooligosaccharide and probiotic on body weight gain, feed intake and feed efficiency of broiler chicks. A feeding trial was conducted with a total of 216 broiler chicks. Each treatment had 18 chicks with 3 replications. The supplementation levels of each treatment in the experimental diets were 0.20% for zinc gluconate, fructooligosaccharide and probiotic, respectively. The body gain of chicks fed feed additives significantly increased (p<.05) compare with that of control. Especially, the treatment with probiotic produced higher body gain than other treatments. Average feed intake of chicks was not significantly different among treatments (p<.05). Feed efficiency of chick fed feed additives significantly (p<.05) improved compare with control and the highest in the probiotic treatment. Therefore, the feed efficiency of chicks fed fructooligosaccharide, zinc gluconate and probiotic treatment were increased by 3.5%, 4.0% and 4.5%, respectively compare to that of the control. In conclusion, dietary feed additives tended to slightly improve the body gain and feed efficiency. Especially the treatment with probiotic produced higher body gain and feed efficiency among other treatments.

In this work, the effects of atmospheric oxygen plasma treatment of carbon fibers on mechanical interfacial properties of carbon fibers-reinforced epoxy matrix composites was studied. The surface properties of the carbon fibers were determined by acid/base values, Fourier-transform infrared spectrometer (FT-IR), and X-ray photoelectron spectroscopy (XPS) analyses. Also, the crack resistance properties of the composites were investigated in critical stress intensity factor (KIC), and critical strain energy release rate mode II (GIIC) measurements. As experimental results, FT-IR of the carbon fibers showed that the carboxyl/ester groups (C=O) at 1632 cm-1 and hydroxyl group (O-H) at 3450 cm-1 were observed for the plasma treated carbon fibers, and the treated carbon fibers had the higher O-H peak intensity than that of the untreated ones. The XPS results also indicated that the O1S/C1S ratio of the carbon fiber surfaces treated by the oxygen plasma led to development of oxygen-containing functional groups. The mechanical interfacial properties of the composites, including KIC (critical stress intensity factor) and GIIC (critical strain energy release rate mode II), were also improved for the oxygen plasma-treated carbon fibersreinforced composites. These results could be explained that the oxygen plasma treatment played an important role to increase interfacial adhesions between carbon fibers and epoxy matrix resins in our composite system.

국제해사기구(IMO)에서는 해양 환경보호를 위해 황산화물(SOX), 질소산화물(NOX), 이산화탄소(CO2) 등의 선박 배기가스 배출 규제를 강화하고 있으며, 특히 미국, 유럽을 중심으로 배출가스통제구역(Emission Control Area, ECA)을 설정하여 운용하고 있다. 이러한 환경 규제의 대응방법으로서 친환경·고효율 선박에 대한 요구가 커지면서 배출가스를 줄일 수 있는 전기추진시스템 관련 연구 및 기술에 대한 관심이 늘어나고 있다. 컨테이너선과 같은 상선은 경제속도 운항의 이유로 전기추진시스템의 적용대상에서 벗어나 있었으나, 앞으로 배기가스 배출 규제가 강화되고 4차 산업혁명 기술로 대표되는 빅데이터, IoT 기술을 적용한 자동화 시스템이 선박에 적용되기 위해서는 모니터링 및 제어가 쉬운 전기추진시스템이 필요할 것으로 전망된다. 따라서 본 논문에서는 6,800TEU 컨테이너 선박을 대상으로 전기추진시스템을 적용하기 위해서 기존 컨테이너 선박의 부하분석을 통해 부하분석 기반의 발전기 및 배터리 용량 설계를 목표로 연구를 진행하였다. 부하분석기반으로 설계된 시스템은 배터리를 이용한 부하분배제어를 통해 발전기가 높은 효율구간에서 운용할 수 있다는 장점이 있다.

The presence of the Fourth Industrial Revolution is omniscient, led by full force emergence of technologies that make biological, physical, and digital worlds borderless. All industries which jump on the bandwagon, can observe convergence and merging of bushiness happening within, between and across industries. As the shipping and port logistics industry is said to be in eye of this storm, the purpose of this study is to investigate the shipping and port logistics industry’s awareness regarding 4th IR, as well to identify necessary countermeasures in responding to progression of this trend. Analytic Hierarchy Process (AHP) methodology was then used to compare the importance of four phases of countermeasures, reviewed by experts in the field. Results showed that countermeasures should be first orchestrated to the ‘Merging and Integration of Inter-industry', then followed by ‘Preemptive Introduction of Advanced Technology', ‘Expansion of Intra-industry Businesses’, and eventually 'Automation, Unmanned Technology'. Last but not least, four phases of countermeasures which should be introduced and executed one phase after another, are outlined for the shipping and port logistics industry to boost its competitiveness in addressing this progressive trend.

해상에서 운용되는 일점계류형 해양플랜트의 태양광 발전 시스템은 독립 전원 체계를 가지고 있으며, 해상 환경, 부조일수 등의 영향으로 안정적인 전력을 공급하는 것이 중요하다. 이러한 이유로 태양광 패널을 여러 방향으로 설치하게 되는데, 이 때 각 패널마다 입사되는 광량이 달라지므로 부분음영현상이 발생하게 된다. 육상용 태양광 발전시스템의 발전량은 위도의 영향을 받으므로 우리나라의 경우 30~36° 사이의 각도로 설치하는 것이 일반적이나, 일점계류형 해양플랜트에 설치되는 태양광 발전 시스템의 경우 부분 음영 현상에 의해 최대전력점이 제어 가능 범위 밖에 존재하는 경우가 발생하게 되고 이는 전력 발전 손실이 된다. 이 때 두 패널의 광량차이를 줄임으로써, 최대 전력점을 MPPT 알고리즘이 추종 가능한 범위에 존재하게 하여 발전 효율을 더 높일 수 있으며, 시뮬레이션 결과 설치각도 20°에서 가장 높은 발전 효율 가짐을 확인하였다.

최근 해양시설물용 파력발전시스템은 본래 기능과 연계한 하이브리드 형태로 많은 연구개발이 이루어지고 있다. 이 중 방파제에 설계된 진동 수주형 파력발전시스템의 경우, 기존의 방파제의 기능에 더불어 터빈을 통해 파랑에너지를 전기에너지로 변환하는 발전기능을 갖는다. 이러한 형태의 발전 시스템은 해수를 손실 없이 최대한 많이 유입되도록 하는 것이 중요하다. 본 논문에서는 유입구 형상에 따른 파 력발전시스템의 출력 특성에 대해 기술하였다. 또한 일반적인 해양 구조물인 방파제에 부착된 진동수주형 웰즈터빈 모델을 시뮬레이션 하여 유입구 곡면 각도에 따라 변화하는 유입량과 해수속도 그리고 그에 따른 웰즈터빈의 출력을 측정하였다. 마지막으로 시뮬레이션 결과를 바탕 으로 하여 에너지 변환 효율을 높이기 위한 유입구 형상을 제안하였다.

A leisure ship has a stand-alone type power system, and a generator is in use on this condition. But the generator cannot be operated in condition of leisure activity, ocean measurement and etc, because of environment and noise. Recently, renewable energy system is connected with power system of the leisure-ship for saving energy. The renewable energy system can not supply the stable power to leisure-ship because power generation changes according to weather condition. And most of the leisure ship is operated without methodical power management system. This study's purpose is to develop SPMS(Smart Power Management System) algorithm using the renewable energy (photovoltaic, wind power and etc.). The proposed algorithm is able to supply stable the power according to operation mode. Furthermore, the SPMS manages electric load (sailing and communication equipment, TV, fan, etc.) and reduces operating times of the generator. In this paper, the proposed algorithm is realized and executed by using LabVIEW. As a result, the hour for operating the generator is minimized.

Buildings nowadays are increasingly expected to need higher and more economic performance requirements. Energy consumption in buildings accounts for over 30% of total energy use. The Building Energy Management System (BEMS) and renewable energy (RE) technologies are considered as a potential measure to improve energy efficiency and reduce use of grid-power. It is, however, a challenge to utilise the intermittent energy supply of RE in building energy systems. This paper presents an experimental study on a RE-embedded BEMS. A control algorithm for the RE-embedded BEMS was designed to maximise the utilisation of RE and eventually to reduce electrical utility bill. The proposed system is tested at a laboratorial chamber with an air conditioner, fan and heater. The contribution of RE in building energy system is discussed to this end.

There are many difficulties to supply constant power to marine facilities which operate in the sea. Especially, there is a limit to stand alone power supply systems due to the influence of weather conditions. That's why a hybrid power supply system is required to overcome these problems. This paper will describe an Electronic Anti-Fouling System (EAFS) to maximise the power efficiency for a solar - wave hybrid power generation system. A main factor reducing the efficiency of a Wave Energy Converter (WEC) is due to the attachment of aquatic life forms. Therefore the aim of this research is to develop a simulation programme to enable the design of more efficient EAFS for hybrid power generation systems and to provide valuable data for production of more efficient EAFS.

In the sea various methods have been conducted to capture wave energy which include the use of pendulums, pneumatic devices, etc. Floating devices, such as a cavity resonance device take advantages of both the water motion and the wave induced motions of the floating body itself. The wave energy converter is known commercially as the WAGB(Wave Activated Generator Buoy) and is used in some commercially available buoys to power navigation aids such as lights and horns. This wave energy converter consists of a circular flotation body which contains a vertical water column that has free communication with the sea. A theoretical analysis of this power generated by a pneumatic type wave energy converter is performed and the results obtained from the analysis are used for a real wave energy converter buoy. This paper is shown to have an optimum value for which maximum power is obtained at a given resonant wave period Also, the length of the internal water column corresponds to that of the water mass in the water column. If designed properly, wave energy converter can take advantage not only of the cavity resonance, but also qf the heaving motion of the buoy. Finally, simulation is performed with a LabVIEW program and the simulation results are applied to a wave energy simulator for modifying design data for a wave energy converter.

Corrosion is never avoided in the use rf materials with various environments. The underwater hull is normally protected against rusting by several coatings of anti-corrosive paint. The purpose of ICCP(Impressed Current Cathodic Protection) system is to eliminate the rusting or corrosion, which occurs on metal immersed in seawater. This thesis is about the ICCP control and monitoring system, which brings protection against the corrosion of the ship's hull in the sea environments. The test system for ICCP is composed of a power supply, anode, reference electrode and controller. The test system is composed power supply, anode, ref electrode, shunt and etc. The protection current is sent to the protection area though anode. Reference electrode senses whether or not the detected potential is within a range of protection of test equipment and then it is automatically controlled to increase or decrease the amount of protective current to be sent to the anode by controller. The monitoring system with LabView is also detected in order to check the normal state of the system at operation period, because an operator does not always watch over this system and thus the system cannot operate well because rf his or her negligent management. This paper was studied the variation of potential and current density with environment factors, velocity and time, and the experimental results will be explained Also, It is suggested that this system can accommodate a ship's automation for SCMS(Ship Control and Management System) and will be very useful.