Maca has been reported to alleviate male menopause symptoms in humans and experimental animals; however, its mechanism of action in improving male menopause has not been clearly identified. This study aimed to investigate the mechanism of action of gelatinized maca in improving male menopause by analyzing serum testosterone, testicular androgen receptor (AR) expression, and testicular oxidation-antioxidation balance. Gelatinized maca was administered orally to aged male C57BL/6 mice at three doses (500, 1,000, and 1,500 mg/kg/day) for 28 consecutive days. Serum biochemical analysis showed an increase in serum hydroxysteroid 17-beta-dehydrogenase 13 (HSD17β13) concentration at 1,500 mg/kg/day and a decrease in serum sex hormone-binding globulin (SHBG) concentration at ≥ 1,000 mg/kg/day. Gelatinized maca administration also resulted in the increased expression levels of testicular AR and cyclic adenosine monophosphate (cAMP) response element binding protein (CREB) at 1,500 mg/kg/day. Oxidative stress analysis showed an increase in testicular superoxide dismutase and glutathione reductase activities and a decrease in testicular malondialdehyde at 1,500 mg/kg/day. In conclusion, gelatinized maca administration to aged male mice increased HSD17β13, AR and CREB expression, and antioxidant capacity and decreased serum SHBG. The results of the present study suggest that gelatinized maca may be a useful substance that can help alleviate male menopause symptoms.

The development of thermoelectric (TE) materials to replace Bi2Te3 alloys is emerging as a hot issue with the potential for wider practical applications. In particular, layered Zintl-phase materials, which can appropriately control carrier and phonon transport behaviors, are being considered as promising candidates. However, limited data have been reported on the thermoelectric properties of metal-Sb materials that can be transformed into layered materials through the insertion of cations. In this study, we synthesized FeSb and MnSb, which are used as base materials for advanced thermoelectric materials. They were confirmed as single-phase materials by analyzing X-ray diffraction patterns. Based on electrical conductivity, the Seebeck coefficient, and thermal conductivity of both materials characterized as a function of temperature, the zT values of MnSb and FeSb were calculated to be 0.00119 and 0.00026, respectively. These properties provide a fundamental data for developing layered Zintl-phase materials with alkali/alkaline earth metal insertions.

Cement is widely used as representative industrial material. In Korea, about 50 million tons of cement are consumed every year. In the manufacture of cement, raw materials containing NORM such as fly ash and bauxite are used. Therefore, the workers can be subjected to radiation exposure. The major exposure pathway in NORM industries is internal exposure due to inhalation of aerosol. Internal radiation dose due to aerosol inhalation varies depending on physicochemical properties of the aerosol. Therefore, the objective of this study was to investigate aerosol properties influencing inhalation dose in cement industries. In this study, aerosol properties were measured for two cement manufacturers. A particulate size distribution and concentration at various processing areas in cement manufacturing industries in Korea were analyzed using a cascade impactor. The mass density of raw materials and byproducts were measured using pycnometer. Shape of particulates was analyzed using SEM. The radioactivity concentration of Ra-226, Ra-228 for U/Th decay series was measured using HPGe. Particulate concentration by size was distributed log-normally with maximum at particle size about 7.2 μm in manufacturer A and 5.2 μm in manufacturer B. The mass density of fly ash and cement were 2.3±0.06, 3.2±0.02 g/cm3 respectively in manufacturer A. In manufacturer B, the mass density of bauxite and cement were 3.4±0.02, 2.9±0.01 g/cm3 respectively. The shape of particulates appeared as spherical shape in manufacturer A and B regardless of sampling area. Thus, a shape factor of unity could be assumed. The radioactivity concentrations of Ra-226, Ra-228 were 82±9, 82±8 Bq/kg for fly ash, and 25±4, 23±3 Bq/kg for cement in manufacturer A. In manufacturer B, the radioactivity concentrations of Ra-226, Ra-228 were 344±34, 391±32 Bq/kg for bauxite, and 122±13, 145±12 Bq/kg for cement. The radioactivity concentrations of Ra-226, Ra-228 in cement were less than raw materials such as fly ash and bauxite. It is because the dilution of the radioactivity concentration occurred during mixing with other raw materials in cement production process. This study results will be used as database for accurate dose assessment due to airborne particulate inhalation by workers in cement industries.

The diaphragm is an important part because it plays an important role in changing the flow direction of hightemperature and high-pressure steam in the steam turbine. Because it is subjected to high pressure by high temperature steam, there should be great concerns about breakage of parts, runouts due to vibration by rotating parts, and deformation due to creep effect and fatigue breakage due to long-term use in high temperature environments. In order to ensure the safety of turbine components in such a harsh environment, structural analysis should be prioritized prior to manufacturing prototypes. In this study, in order to verify the design stability of the diaphragm, physical safety is checked through static analysis, vibration analysis, and fatigue analysis, and the fatigue life is predicted. The total deformation, equivalent stress, and strain are determined by static analysis, and the stress and total deformation by the harmonic response are obtained through vibration analysis, and the stability is judged by comparing it with the characteristic value. We intend to verify the safety of the design and propose a complementary diaphragm design.

대형 유조선에서 유류의 선적이나 하역에 사용되는 장치인 COPT (Cargo Oil Pump Turbine) 가 매우 큰 형태이므로 이 터빈을 회전시키는 장치가 Rotor disc로서, 내부에 stator ring이 장착되어 있고 이 ring에는 많은 turbine blade가 riveting 방법에 의해 체결되어 있다. riveting 은 재래식 가공 방법으로서 정밀도와 작업자의 근 골격계 직업병 등 많은 문제점을 포함하고 있다. 이러한 문제를 해결하기 위해 riveting 체결방법을 조립방법으로 전환하여 링의 조립정밀 도를 향상하고 stator의 수명을 연장시킬 수 있다. 많은 turbine blade가 링의 중심점을 기준으로 원주상에 배열되어 있는 형태로서 조립을 위한 구조개선을 필요로 한다. 이런 목적을 달성 하기 위해서는 ring 구조를 결구 방식으로 변경하고 조립 후 COPT에 적용하였을 때 안전성이 보장되어야 한다. Stator 링의 모델링과 구조안전성에 대한 검증은 상용 software를 이용하여 결과를 도출한다.

최근 다양한 유기재배 작물의 뿌리를 가해하는 굼벵이류의 피해가 증가하고 있으나, 굼벵이류는 토양 내 발생하는 특징으로 인해 발생시기 및 그 종류에 대한 확인이 어려운 해충이다. 피해를 끼치는 굼벵이의 발생을 파악하기 위해 고구마 유기재배지에 페로몬 트랩을 이용하여 굼벵이의 성충의 종류 및 발생 동향을 조사하였다. 조사지는 무안 유기재배농가와 국립농업과학원 완주군 포장에서 이루어졌다. 3종의 풍뎅이 페로몬 루어를 유인제로 사용하였으 며 6월 초부터 8월 말까지 조사지에 트랩을 설치하여 포획된 풍뎅이를 수집하여 동정을 하였다. 유기재배포장에서 포획된 종은 큰검정풍뎅이, 콩풍뎅이, 청동풍뎅이, 녹색콩풍뎅이, 별줄풍뎅이 등의 풍뎅이와 흰점박이꽃무지 등이 주로 채집되었다. 유기재배 고구마포장에서 풍뎅이 발생소장을 조사한 결과 최대로 발생한 시기는 7월초였다.