Herein, the existing structural design criteria for highway bridge columns with hollow bars were analyzed. Expanding upon previous research focused on the performance analysis of the columns under compressive loads, load– displacement curves were evaluated and crack analysis was performed under cyclic transverse loads. A three-dimensional nonlinear finite-element structural analysis compared the structural performance of existing steel bars, same-reinforced hollow bars, and reduced hollow bars in detail. Results indicated that with regard to elastic or initial crack behavior, the existing steel bars can be replaced by the other bars. Future research should delve into inelastic behavior and strategies to ensure seismic performance.

본 연구는 다중벽 탄소나노튜브(MWCNT)로 보강된 복합재 구조의 동적 해석을 다루었다. Mori-Tanaka 모델을 기반으 로 MWCNT 중량 비율, 패널의 곡률, 그리고 CNT의 임의 배열이 복합재의 동적거동에 미치는 상호작용을 연구하였다. 본 연구 결과는 CNT의 부피함유비율의 변화에 따른 복합재의 유효탄성계수를 예측하는 기존 문헌결과와 비교하여 검증하였다. 수치해 석 예제는 복합재의 동적 특성을 평가함에 있어서 MWCNT 보강의 불규칙한 배열 또는 기울어진 방향으로 배치된 효과에 대한 중요성을 제시하였다.

This study performs finite Element stress analysis of flange connections at noise barriers with circular steel tubes, which have a light weight. Subsequent numerical simulation results for three types of models (standard, double, and standard models strengthen by ribs) present that the applied connections for target noise barriers constructed show suitable structural performance. In this paper, the existing finite element stress analysis using the ABAQUS program is further extended to study the local stress distribution of the noise barriers with new type circular steel tubes. The numerical results for various parameters are verified by comparing different types with stresses occurred in the noise barrier from the numerical simulation.

This study carried out fiber damage detections of laminated GFRP plate structures using a modified bi-variate Gamma function. The effects of different layup sequences of composites on the fiber damage detection are studied using the finite element commercial package and genetic algorithm. Four unknown parameters are considered to determine the shape of the damage distribution, which is a modified form of the bivariate Gamma density distribution function. The sample studies show the excellence of the proposed method from the standpoints of its computation efficiency as well as its ability to determine the complex shape of an arbitrary stiffness degradation distribution.

This study deals with optimized structural analysis of stainless rectangular water reservoirs with 5,000ton capacity for various combined load cases. The objective of this study is to propose most efficient structural models through the comparison of various model cases. In order to perform an optimized analysis, three dimensional finite element analyses are carried out for large sized models. The numerical results obtained provides the detailed size and thickness for optimal design of water reservoir. In particular, results reported in this paper show the influence of various types of loading and dimensions of the wall and stiffened column on the structural behavior of the large sized water tanks.

The finite element analysis of large sized rectangular water tank structures made of stainless steel materials is carried out for various combined load cases. The combined load cases for a large size of 5,000ton are further determined using the specification(KS B　6283) established from the Korean Standards Association. For the better numerical efficiency, the rectangular panels are modelled using the ANSYS program. The numerical results obtained for different load cases show as follows. In order to resist the snow load, it takes the influence of the gap than the size of the column. Also, in order to resist the water pressure, it shall increase the thickness of the wall. But, increasing the thickness of the wall is considerably less economical. Therefore, the angle with big thickness should be placed right next to the wall.

This study performed a finite element stress analysis of pipe system connected by bellows based on APDL(ANSYS Parametric Design Language) customizing. The effects of different shapes of developed pipes for various parameters are studied using the finite element commercial package for this study. The structural behavior of complex pipe structures with bellows was also investigated to study the interactions between bellows and other parts. Based on the ANSYS APDL, the effect of initial axial and lateral displacements, and internal temperature and pressure on the Von Mises stress distribution is also analyzed.

In this study we developed an integrated precast concrete decks for a rapid construction. The structural performance in the integrated precast bridge decks is evaluated by real-scale test bed and detailed finite element analyses. The numerical analysis results were compared with the experimental data from a real-scaled single-span precast/prestressed concrete bridge decks under truck loading. Parametric studies are focused on the various effects of external loads on the structural behavior for different locations and measuring points on the precast bridge decks. The assessment in this study indicates that the integrated precast bridge decks show an excellent structural performance as expected.

The finite element stress analysis of large sized rectangular water tank structures made of stainless steel materials is carried out for various combined load cases. The combined load cases for a large size of 5,000ton are further determined using the specification(KS B　6283) established from the Korean Standards Association. The changed water capacity due to the size of reservoirs could be heavily dependent for evaluating seismic effects, especially for large reservoirs. For the better numerical efficiency, the rectangular panels are modelled using the ANSYS ADPL module. The numerical results obtained for different load cases mainly show the effect of the interactions between the different load combination and other various parameters, for example, the water capacity, and different stainless steel materials. The structural performance for various load combinations is also evaluated.

This study performed a finite element crash analysis of support structures made of various composite materials for road facilities. The effects of different material properties of composites for various parameters are studied using the finite element commercial package for this study. In this study, the existing finite element analysis of composite post structures using the LS-DYNA program is further extended to compare dynamic behaviors against car crash of the structures made of various composite materials. The several numerical examples show the comparison of the nonlinear dynamic effects for different materials.

This study carried out passenger safety assessment by real car crash simulation of composite post structures for road facilities. The effects of different material properties of composites for various parameters are studied using the LS-DYNA finite element program for this study. In this study, the existing finite element analysis of steel post structures using the LS-DYNA program is further extended to study dynamic behaviors of the structures made of various composite materials. The numerical results for various parameters are verified by comparing different models with displacements and stress distribution occurred in the post and car.

This study analyzes performance-cost ratio of composite(GFRP) wind-towers by fiber reinforcement angle and determines their optimal fiber angle. The finite element models for composite structures using the ANSYS program described in this paper is attractive not only because it shows excellent accuracy in analysis but also it shows the effect of the geometrical combination. New results reported in this paper are focused on the significant effects of the cost for various parameters, such as thicknesses of outer shells and stiffeners. From the numerical examples, optimal fiber angles were determined as 80°∼90°.

This study carried out finite element deflection analysis of cylindrical shell structures made of composite materials, which is based on the micro-mechanical approach for different fiber-volume fractions. The finite element (FE) models for composite structures using multi-scale approaches described in this paper is attractive not only because it shows excellent accuracy in analysis but also it shows the effect of the material combination. New results reported in this paper are focused on the significant effects of the fiber-volume fraction for various parameters, such as fiber angles, layup sequences, and length-thickness ratios. It may be concluded from this study that the combination effect of fiber and matrix, largely governing the dynamic characteristics of composite shell structures, should not be neglected and thus the optimal combination could be used to design such civil structures for better dynamic performance.

The dynamic analysis of poles made of advanced composite materials is carried out for different length-thickness ratios and layup sequences. The numerical results using ABAQUS obtained for plates and shells are in good agreement with those reported by other investigators. The new results for laminated composite pole structures in this study mainly show the effect of the interactions between the radius-length ratio and other various parameters. The effect of fiber angles of long composite poles also investigated. Key observation points are discussed and a brief design guideline is given.

The method based on various mathematical characteristic equations for identifying tensile forces in the cable structure system are used as response data to reflect the properties of the dynamic sensitivity. The vibration tests have been conducted with respect to levels of applied weight for the sagged cable. In this study, a set of natural frequencies are extracted from the measured dynamic data. Next, existing characteristic equation methods based these extracted natural frequencies are applied to identify tensil forces of the sagged cable system. Through several verification procedures, the proposed methods could be applied to a sagged cable system when the initial material data are insufficiency.

This study deals with an enhanced assumed strain (EAS) three-dimensional element for free vibration analysis of laminated composite and sandwich structures. The three-dimensional finite element (FE) formulation based on the EAS method for composite structures shows excellence from the standpoints of computational efficiency, especially for distorted element shapes. Using the EAS FE formulation developed for this study, the effects of side-to-thickness ratios, aspect ratios and ply orientations on the natural frequency are studied and compared with the available elasticity solutions and other plate theories. The numerical results obtained are in good agreement with those reported by other investigators. The new approach works well for the numerical experiments tested, especially for complex structures such as sandwich plates with laminated composite faces.

본 연구에서는 강재가 맞대기 이음으로 연결될 경우 CFRP(Carbon Fiber Reinforced Plastic) 쉬트(sheet)를 맞대기 이 음부에 접착할 경우 강재 및 CFRP 쉬트에 발생하는 응력을 해석하였다. CFRP 쉬트로 보강한 경우 접착제의 두께, 강재와의 접착 길이, CFRP 강도 변화를 매개변수로 사용하여 이 매개변수에 변화에 따른 이음부의 응력분포를 분 석하였다. 또한 CFRP를 여러 층으로 접착할 경우 각 층의 강도를 다르게 변화시켜 맞대기 이음부에 유리한 응력분 포를 나타내는 CFRP의 강도를 제시하였다. 본 연구를 위해 빠른 수렴성을 가지며 왜곡된 요소형상에서도 정확한 응력결과를 보이는 강화변형률장(Enhanced Assumed Strain Field)을 사용한 평면변형률 유한요소에 대한 프로그램을 작성하였다.

본 연구에서는 1차항 판이론에 기반한 적층된 ACM 경사판의 기하학적 비선형 동적해석을 수행하였다. 비선형 동 적해를 구하기 위하여 Newmark 방법과 Newton-Raphson 반복법을 혼용하여 적용하였다. 본 연구에서 개발한 유한요 소 해석프로그램을 사용하여 경사각도와 적층 배열의 변화가 판의 기하학적 비선형 거동에 미치는 영향을 상세 분 석하였다. 몇 가지 수치해석 결과는 기존 연구자로부터 얻어진 결과와 잘 일치하는 것으로 나타났다. 본 연구의 새 로운 결과는 경사 적층 구조의 경사각도와 적층 배열과의 중요한 상호관계를 보여준다. 몇 가지 수치예제는 ACM 경사 적층판을 설계하는데 필요한 가이드라인을 제시하였다.

In this paper, the analysis of impact damage behavior of a reinforced concrete structure that undergoes both a shock impulsive loading and an impact loading due to the air blast induced from an explosion is performed. Firstly, a pair of multiple loadings are selected from the scenario that an imaginary explosion accident is assumed. The RC structures strengthened with advanced composite materials (ACM) are considered as a scheme for retrofitting RC wall structures subjected to multiple explosive loadings and then the evaluation of the resistant performance against them is presented in comparison with the result of the evaluation of a RC structure without a retrofit. Also, in order to derive the result of the analysis similar to that of real explosion experiments, which require the vast investment and expense for facilities, the constitutive equation and the equation of state (EOS) which can describe the real impact and shock phenomena accurately are included with them. In addition, the numerical simulations of two concrete structures are achieved using AUTODYN-3D, an explicit analysis program, in order to prove the retrofit performance of a ACM-strengthened RC wall structure.