Among various organic materials suitable for silicon-based inorganic-organic hybrid solar cells, poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) (PEDOT:PSS) has been extensively studied due to its high optical transmittance, high work function, and low bandgap characteristics. The electro-optical properties of PEDOT:PSS have a significant impact on the power conversion efficiency of silicon-organic hybrid solar cells. To enhance the photovoltaic properties of the silicon-organic hybrid solar cells, we developed a method to improve the properties of the PEDOT:PSS film using Ag nanowires (NW) instead of conventional solvent addition methods. The influence of the Ag NW on the electro-optical property of the PEDOT:PSS film and the photovoltaic performance of the silicon-organic hybrid solar cells were investigated. The addition of Ag NW further improved the sheet resistance of the PEDOT:PSS film, enhancing the performance of the silicon-organic hybrid solar cells. The present work using the low sheet resistance PEDOT:PSS layer paves the way to develop simple yet more efficient siliconorganic hybrid solar cells.

본 연구에서는 내진성능향상을 목표로 CNT-복합소재로 보강된 콘크리트 구조물의 휨 인장 거동을 다루었다. 다양한 CNT 함유량에 따른 복합소재의 재료적 물성은 수정된 Halpin-Tasi 모델을 적용하여 멀티스케일해석 이론으로부터 도출하였다. 휨인장 시험은 복합소재의 종류, CNT 함유비율, 도포제의 유무, 그리고 보강 방법에 따라서 수행하였다. 변수 실험 결과는 CNT-복합재로 보강된 콘크리트 구조의 향상된 휨인장 거동에 대하여 CNT 함유량과 적절한 도포제의 적용 (부착)의 중요성을 보여주었다.

Thermographic imaging based non-destructive evaluation proceeds measuring the defect or internal condition of civil structures. To demonstrate the feasibility of the method, the infrared camera system is applied to various specimens. The technique described in this paper may allow us to find their numbers, locations, and the extent of damaged steels from the measurement in the long distance. In addition, a reinforced concrete specimens with different penetration depths is tested using the active thermography method, and to study the influence on the detecting internal rebar in cooled and heated conditions. The experimental results demonstrate that thermographic imaging method is useful for detecting the damage of steel structures and the unknown rebar in the concrete.

This study carried out fiber damage detections of laminated GFRP plate structures using a modified bi-variate Gamma function. The effects of different layup sequences of composites on the fiber damage detection are studied using the finite element commercial package and genetic algorithm. Four unknown parameters are considered to determine the shape of the damage distribution, which is a modified form of the bivariate Gamma density distribution function. The sample studies show the excellence of the proposed method from the standpoints of its computation efficiency as well as its ability to determine the complex shape of an arbitrary stiffness degradation distribution.

A finite element simulation study was performed to determine influences of different post spaces and thicknesses of crash barriers on the dynamic behaviors due to truck crash. Accuracy of the simulation was verified using qualitative and quantitative comparisons. Based on in-depth examination of crash simulation recordings, energy distributions occurred in the barrier against the car are determined. In this paper, the existing finite element crash analysis of barriers using the LS-DYNA program is further extended to study the dynamic response of the barrier with various geometries of the guardrail. The numerical results for various parameters are verified by comparing different models.

This study performed an inverse detection of fiber stiffness degradation that occurs due to damages in free vibrating composite structures. Five unknown parameters are considered to determine the fiber stiffness which is a modified form of the bivariate Gaussian distribution function. The proposed approach is more feasible than the conventional element-based damage detection method from the computational efficiency because a finite element analysis coupled with a genetic algorithm using a small number of unknown parameters is performed. The numerical examples show that the proposed technique is a feasible and practical method, which can prove the location of a damaged region as well as inspect the distribution of deteriorated fiber stiffness although there is a small difference in dynamic characteristics between damaged and undamaged structures.

In this study, we performed non-elastic dynamic analyses using LS-DYNA for plate structures made of laminated composite materials. It was used mat_59_composite_failure_shell_model providing from LS-DYNA as material model of composite material The material which is applied in the analysis as CFRP and GFRP, were compared by performing the dynamic analysis in accordance with various layup sequences. Numerical results show structural resistance against impact loading for different materials. In addition, The significance of the layup sequence in analyzing composite structures under impact loading is enunciated in this paper

This study performed a finite element crash analysis of support structures made of various composite materials for road facilities. The effects of different material properties of composites for various parameters are studied using the finite element commercial package for this study. In this study, the existing finite element analysis of composite post structures using the LS-DYNA program is further extended to compare dynamic behaviors against car crash of the structures made of various composite materials. The several numerical examples show the comparison of the nonlinear dynamic effects for different materials.

This study carried out passenger safety assessment by real car crash simulation of composite post structures for road facilities. The effects of different material properties of composites for various parameters are studied using the LS-DYNA finite element program for this study. In this study, the existing finite element analysis of steel post structures using the LS-DYNA program is further extended to study dynamic behaviors of the structures made of various composite materials. The numerical results for various parameters are verified by comparing different models with displacements and stress distribution occurred in the post and car.

This study carried out real car crash simulation of composite post structures for road facilities. The effects of different material properties of composites for various parameters are studied using the LS-DYNA finite element program for this study. In this study, the existing finite element analysis of steel post structures using the LS-DYNA program is further extended to study dynamic behaviors of the structures made of various composite materials. The numerical results for various parameters are verified by comparing different models with displacements and stress distribution occurred in the post and car.