The Yeongsan River is a prominent inland waterway, alongside the Han River, Nakdong River, and Geum River in South Korea. Numerous bacterial strains were isolated from the Yeongsan River basin for a comprehensive investigation into indigenous prokaryotic species conducted between 2020 and 2023. These bacterial strains were identified using 16S rRNA gene sequencing, wherein 45 bacterial strains shared >98.7% sequence similarities with bacterial species not recorded in Korea thus far. Therefore, this study aimed to catalogue aforementioned unrecorded species and characterize them contingent upon their Gram nature, colony and cell morphologies, biochemical properties, and phylogenetic positions. These bacterial species were determined to be phylogenetically diverse. They were categorized into nine classes, 18 orders, and 25 families. These previously unrecorded species were classified into the following genera and classes: Chitinophaga (class Chitinophagia); Flavobacterium (class Flavobacteriia); Rhodopseudomonas, Gemmobacter, Paracoccus, Azospirillum, Sphingomonas, Novosphingobium, Sphingorhabdus, and Erythrobacter (class Alphaproteobacteria); Bordetella, Pararobbsia, Polynucleobacter, Rhodoferax, Aquabacterium, Malikia, Comamonas, Ideonella, Paucibacter, Undibacterium, Cupriavidus, and Thauera (class Betaproteobacteria); Pectobacterium, Arenimonas, Lysobacter, and Luteimonas (class Gammaproteobacteria); Luteolibacter (class Verrucomicrobiia); Mycolicibacterium, Angustibacter, Ornithinibacter, Janibacter, Schumannella, Aurantimicrobium, Luedemannella, Nocardioides, and Propionicimonas (class Actinomycetes); Geothrix (class Holophagae); and Lactococcus (class Bacilli).

국립원예특작과학원에서는 밝은 화색과 안정적인 화형의 생 육이 우수한 빨간색 스탠다드 장미 품종을 육성하기 위해 진한 적색 스탠다드 장미 품종 ‘엔드리스러브(Endless Love)’를 모 본으로, 꽃잎수가 많고 안정적으로 가시가 적은 밝은 노란색 ‘페니레인(Penny Lane)’ 품종을 부본으로 인공교배하였다. 37 개의 교배실생을 양성해 1, 2, 3차에 걸친 특성검정 및 현장실증 을 통해 꽃이 크고 화형이 안정적이며, 재배안정성 및 생산성, 절화특성이 우수한 ‘원교 D1-390’을 최종 선발하였다. 2023년 ‘루비레드(Ruby Red)’로 명명하여 국립종자원에 품종보호출원·등록되었다. ‘루비레드’ 품종은 밝은 적색(R53C)을 가졌으 며, 꽃잎수가 32.8매, 화폭과 화고는 각각 10.9, 5.9cm로 대조 품종보다 크다. 절화장은 평균 71.7cm, 절화수명은 약 16.7일, 수량은 연간 168대/m2로 대조품종인 ‘레드스퀘어(Red Square)’ 대비 절화장이 길고 절화수명도 2배 이상 길며, 수확량도 1.4배 우수하다. 2023년 국내 육성 장미 품종 서울식물원 관람객 대상 공동평가회에서 스탠다드 장미 중 우수한 평가를 받았으며, 현 장 실증 결과 농가별로 균일하고 우수한 수량과 절화품질을 보 였다. 절화용 장미 ‘루비레드’ 품종은 밝은 적색과 우수한 화형 을 가지는 품종으로 해외 대체 품종으로 국내에서 많이 재배될 것으로 기대된다.

본 연구는 국립수목원 내 전문전시원에 발생한 이입식물을 대상으로 2015년부터 2023년까지 이입식물 분포조사를 시행 하였다. 그 결과 자생식물 299종, 귀화식물 49종, 재배식물 13 종 총 63과 214속 361종이 조사되었다. 국화과가 63종으로 가장 많았고, 벼과, 사초과 순으로 발생하였다. 이입식물의 이입 경로를 분석하기 위하여 광릉숲에 분포하는 식물상과 비교 분석 한 결과 309종이 광릉숲에 분포하는 식물로 확인되었으며, 전 문전시원 내 식재 식물이 확산된 경우가 17종으로 조사되었다. 조사된 귀화식물 49종을 원산지별로 구분하면 유럽과 북아메리카가 69.4%, 이입 시기별 1기와 3기의 비율이 90%를 차지하였 다. 귀화식물의 귀화도 분포 등급을 적용한 결과 4등급 이상이 면서 이입 시기가 3기인 식물 9종은 빠르게 확산할 우려가 큰 식물이므로 지속적인 모니터링이 필요하다. 국립수목원에 어느 정도 귀화식물이 분포하는지를 가늠하는 도시화지수를 산출한 결과 15.0%로 나타났으며, 환경부 지정 생태계교란 야생식물 중 돼지풀, 단풍잎돼지풀, 애기수영, 미국쑥부쟁이가 출현하였 다. 이입식물은 자생식물군락과 전문전시원 내 관람로에 침입하 여 세력권을 확장하고 우점하는 경향이 있어 각각의 생태적 특 성을 고려한 제거 방법이 필요하다.

Schlumbergera truncata absorbs CO2 through its mature phylloclades during the night, and can use a substantial amount of CO2 without requiring ventilation. This study investigated the growth and photosynthetic responses of S. truncata ‘Red Candle’ at two CO2 levels—ambient (≈ 400 μmol･mol-1) and elevated (≈ 1000 μmol･mol-1). At 0–8 weeks after treatment (WAT), width and length of mature phylloclade and length of immature phylloclade did not differ significantly among the CO2 treatments. At 4–8 WAT, number of branches and phylloclades were significantly greater in plants grown under ambient CO2 than those under elevated CO2. Net CO2 uptake was highest in mature phylloclades of plants grown under ambient and elevated CO2 regimes at night, at 2.51 and 1.30 μmol·CO2·m-2·s-1, respectively. However, no statistically significant variation was observed at 6 WAT, and stomatal conductance was significantly affected only by CO2 uptake time at 6 and 8 WAT. Water-use efficiency of mature and immature phylloclades at night increased with increase in CO2 levels (r = 0.7462 and 0.9312, respectively). At 123 days after treatment, plants grown under elevated CO2 had 82.7 floral buds, compared to 72.1 buds in those under ambient CO2. However, this difference was not statistically significant. Moreover, S. truncata grown under elevated CO2 exhibited decreased growth and photosynthesis, whereas the number of floral buds did not exhibit any significant differences among the treatments.

많은 연구에 따르면 Tenebrio molitor은 유충 단계에서 플라스틱을 섭취할 수 있다고 보고되었다. 이 연구의 목적은 T. molitor 유충의 성장과 발달에 발포폴리스티렌 섭취가 미치는 영향을 조사하는 것이다. 밀기울을 섭취한 유충의 성장률은 발포폴리스티렌을 섭취한 유충의 성장률보다 더 좋았고(p < 0.001) 발포폴리스티렌을 섭취한 유 충의 번데기로 전환되는 기간은 밀기울을 섭취한 유충의 번데기로 전환되는 기간보다 더 빨랐다(p < 0.001). 하지만 두 처리구간 생존율은 유의미한 차이가 없었다(p = 0.786). 이 결과에 따르면 발포폴리스티렌을 섭취한 유충은 체중 감소와 짧은 발육기간이 특징이지만 생존하는 것에는 문제가 없었다. 따라서 우리는 T. molitor가 플라스틱 폐기물 의 지속 가능하고 친환경적인 제거를 위한 주요 자원이라는 결론을 내렸다.

High-entropy alloys (HEAs) have been reported to have better properties than conventional materials; however, they are more expensive due to the high cost of their main components. Therefore, research is needed to reduce manufacturing costs. In this study, CoCrFeMnNi HEAs were prepared using metal injection molding (MIM), which is a powder metallurgy process that involves less material waste than machining process. Although the MIM-processed samples were in the face-centered cubic (FCC) phase, porosity remained after sintering at 1200°C, 1250°C, and 1275°C. In this study, the hot isostatic pressing (HIP) process, which considers both temperature (1150°C) and pressure (150 MPa), was adopted to improve the quality of the MIM samples. Although the hardness of the HIP-treated samples decreased slightly and the Mn composition was significantly reduced, the process effectively eliminated many pores that remained after the 1275°C MIM process. The HIP process can improve the quality of the alloy.

Traditional culture contributes to the diversification of modern fashion design and the inheritance of local cultural identity. This study aims to identify the characteristics of traditional handicrafts reflected in modern fashion design in India. For this purpose, it focused on Sabyasachi Mukherjee, Manish Malhotra, and Ritu Kumar, who are currently leading the Indian fashion design field. The methodology involved conducting literature research and analyzing case studies. In the literature, the techniques of Indian traditional crafts such as embroidery, dyeing, and weaving were examined and five design elements of traditional crafts were defined. Through content analysis of 30 images from the three designers’ Instagram accounts, the design characteristics of traditional handicrafts expressed in contemporary Indian fashion design were derived: cultural inheritance using traditional Indian clothing items, traditional materials and practices applied to contemporary clothing, craftsmanship that artistically improves complex details using embroidery techniques, various combinations based on the traditional meaning of colors, and narrative expression using patterns containing India’s cultural identity. Incorporating these traditional handicrafts into fashion design, closely linked to everyday life, aids in conveying and enhancing their significance. The cases demonstrate the successful integration of conservation into contemporary fashion design. This study sheds light on the application of traditional culture in modern fashion design.

The changing media landscape has diversified how and what is discussed about fashion. This study aims to examine expert discussions about fashion shows on social media from the perspective of fashion criticism. To achieve this goal objectively, a text mining program, Leximancer, was used. In total, 58 videos were collected from the panel discussion section of Showstudio from S/S 21 to S/S 24, and the results of text mining on 24,080 collected texts after refinement are detailed here. First, the researchers examined the frequency of keywords by season. This revealed that in 2021–2022, digital transformation, diversity, and fashion films are now commonly used to promote fashion collections, often replacing traditional catwalk shows. From 2023, sustainability and virtuality appeared more frequently, and fashion brands focused on storytelling to communicate seasonal concepts. In S/S 2024, the rise of luxury brand keywords and an increased focus on consumption has been evident. This suggests that it is influenced by social and cultural phenomena. Second, the overall keywords were analyzed and categorized into five concepts: formal descriptions and explanations of the collection’s outfits, sociocultural evaluations of fashion shows and designers, assessments of the commerciality and sustainability of the current fashion industry, interpretations of fashion presentations, and discussions of the role of fashion shows in the future. The significance of this study lies in its identification of the specificity of contemporary fashion criticism and its objective approach to critical research.

The clearwing moth, Synanthedon bicingulata (Staudinger, 1887), is a pest that infests various species of cherry trees. However, genetic information regarding the genus Synanthedon including S. bicingulata, is limited. In this study, we sequenced a complete mitochondrial genome (mitogenome) of the species. The 16,255 bp of S. bicingulata mitogenome differs from the typical gene arrangement formed in Lepidoptera: trnQ-trnS2-trnM-trnI arrangement between the A+T-rich region and the ND2 junction. Moreover, the genome has untranslated repetitive sequences in the intergenic space between lrRNA and trnV, as well as the CGA start codon in COI and the TTG start codon in ATP8. Similar observations are noted in species belonging to the tribe Synanthedonini within the genus Synanthedon.

Climate change has led to increased insect pests and pest distribution changes. Traditionally, chemical control using synthetic pesticides has been the main method for pest management, but the emergence of pesticide-resistant pests has become a problem. There is a need to develop new pest control agents to overcome these issues. Entomopathogenic fungi used in pest management have minimal environmental side effects and possess a mechanism of action distinct from that of synthetic pesticides. However, there is a need for the development of technologies to maximize the insecticidal effects of fungi against pests, and expressing and releasing dsRNA within the fungi can preemptively knock out the activation of the insect’s defense system, thereby enhancing the insecticidal effect. Controlling insect defense genes and using entomopathogenic fungi as bio-carriers forms a new pest management strategy. This approach, described as a “microbial insecticide agents development strategy of cassette concept, ” can versatilely modify genes and microbes. It is expected to overcome the limitations of synthetic pesticides.

본 연구는 민간시장의 절화 유통 현황을 조사하여 국내 절 화 시장 유통 및 판매의 기초 자료로 제공하고자 수행하였다. 조사 기간은 2022년 5월부터 10월까지이며, 민간시장 내 판 매 점포 수, 취급 품목, 수입국 및 품목 등을 비교 및 분석하 였다. 민간시장은 서울 서초구 반포동에 위치한 강남터미널 꽃시장을 대상으로 판매 품목 및 수입 국가 등을 조사하였고, 비교 대상인 공영시장의 경우 한국농수산식품유통공사 화훼 유통정보에서 제공되는 양재동 화훼공판장 거래 품목을 조사 하였다. 조사 결과, 민간시장의 월별 절화 판매 점포 수는 평 균 143개였다. 민간시장에서는 5월을 제외하고 장미 판매 매 장이 가장 많았다. 5월에는 카네이션 판매 매장이 가장 많았 으며 장미, 리시안셔스, 거베라가 그 뒤를 이었다. 민간시장 점포 내 수입 품목의 원산지는 호주, 중국, 콜롬비아, 이스라 엘, 이탈리아, 일본, 네덜란드, 페루, 남아프리카 공화국, 미 국, 베트남 등으로 조사되었다. 취급 품목은 민간시장이 69개 로 공영시장 18개에 비해 약 3.8배 많았으며, 이는 민간시장에서 수입 절화가 더 많이 유통되고 있음을 시사한다. 민간시 장은 공영시장과 달리 유통 정보를 알 수 있는 시스템이 없어 소비자들이 제품의 원산지, 품질, 가격 등을 파악하기 어렵다. 따라서, 민간시장의 절화 유통 정보를 소비자들에게 정확히 제공할 필요가 있으며, 이를 통한 투명한 거래 제공 및 소비자 의 신뢰도를 높이는 것이 중요하다.

Since rice is the main food in Korea, there are no regulations on corn milling yet. Corn is known as one of the world's top three food crops along with wheat and rice, and it is known that 3.5 billion people worldwide use corn for food. In addition, corn mills are not developed or sold in Korea, but the use of corn mills is increasing significantly in many countries in Southeast Asia. In the Philippines, as Korea's rice mill import increases, Korea's KAMICO (Korea Agricultural Machinery Industry Cooperative) and domestic company A agreed to develop a corn mill jointly with PHilMech, an organization affiliated with the Philippine Ministry of Agriculture. However, research on corn milling was very insignificant, so the development was carried out based on the technology of Korea's rice mill. Rice milling is performed by peeling off the skin of rice and producing brown or white rice, so it is carried out by removing the skin and cutting the skin. On the other hand, in the corn mill, the skin of the corn is peeled, pulverized and selected to produce main products suitable for edible use. Therefore, in order to develop a corn mill, processes such as peeling, transfer, grinding, sorting, and by-product separation are required, and suitable parts must be developed. In addition, the performance must be gradually improved through experiments in which corn is repeatedly milled. The Philippines produces 7.98 million tons/year of corn, which is about 100 times that of Korea, and is mostly consumed as a staple food. This is about 10% of the total crop production in the Philippines. In addition, the main cultivation complexes of corn are the mountainous regions of Tarlac or Pangasinan, and the produced corn is 72.4% of the so-called yellow corn called Arabel and Sarangani, and the remaining 27.6% are known as white corn. In this study, it was intended to produce grains of 2.5 mm or less suitable for food for yellow corn and to develop a corn mill for 200 kg per hour. Detailed conditions for development are stipulated as more than 55% of the main product recovery rate, more than 31% of the by-product recovery rate, less than 5% of the raw material loss rate, and more than 80% of the embryo dislocation rate. In this study, to achieve this, the overall process of the corn mill was developed, and the optimal conditions for the corn mill were obtained through the development of parts and empirical tests to improve performance. In addition, it was intended to achieve the development goal by evaluating and analyzing the performance of each part so that it did not conflict.

해사영어는 선박 운항, 해양 안전, 선내 의사소통 및 선외 교신을 위해 설계된 특수한 영어 언어체계이다. 국제해사기구 STCW(선원의 훈련, 자격증명 및 당직근무의 기준에 관한 국제협약)에 따르면 국제항해에 종사하는 항해사가 되기 위해서는 SMCP를 포함한 해사영어 대한 충분한 이해가 수반되어야 한다. 본 연구는 음성인식, 번역, 단어 기입 등 유형의 해사영어시험을 통하여 학생들 의 해사영어 활용 능력을 측정하고 플랫폼 사용에 따른 시험 점수 향상 정도, 나아가 초임항해사로 나가기 위하여 요구되는 해사영어 시험 플랫폼 활용 시간 등을 조사하고자 하였다. 실험은 먼저 초기 시험을 통해 학생들의 일반영어능력과 SMCP 활용 능력에 대한 연 관성을 조사한 후, 중간 시험 및 최종 시험을 통해 플랫폼 활용에 대한 점수 향상 정도, 응시시간 변화 등 요인을 측정하였다. 초기 시 험을 통해 개인 요인(예: 토익 점수, 본인 스스로에 대한 영어능력 평가)에 따른 그룹 간 해사영어시험 점수에 유의한 차이가 있음을 확인하였으며, 중간시험 및 최종시험을 통해 플랫폼 활용이 유의한 시험점수 향상으로 이어졌음을 확인하였다. 해당 연구는 해사 교육 분야에 다양하게 적용할 수 있는 학습 플랫폼 활용 효능을 조사하였으며 향후 해사영어 교육 외 그 범위를 넓혀 활용될 수 있을 것으 로 사료된다.

The radiological characterization of SSCs (Structure, Systems and Components) plays one of the most important role for the decommissioning of KORI Unit-1 during the preparation periods. Generally, a regulatory body and laws relating to the decommissioning focus on the separation and appropriate disposal or storage of radiological waste including ILW (intermediate level waste), LLW (low level waste), VLLW (very low level waste) and CW (clearance waste), aligned with their contamination characteristics. The result of the preliminary radiological characterization of KORI Unit-1 indicated that, apart from neutron activated the RV (reactor vessel), RVI (reactor vessel internals), and BS (biological shielding concrete), the majorities of contamination were sorted to be less than LLW. Radiological contamination can be evaluated into two methods. Due to the difficulties of directly measuring contamination on the interior surfaces of the pipe, called CRUD, the assessment was implemented by modeling method, that is measuring contamination on the exterior surfaces of the pipes and calculating relative factors such as thickness and size. This indirect method may be affected by the surrounding radiation distribution, and only a few gamma nuclides can be measured. Therefore, it has limitation in terms of providing detailed nuclide information. Especially, α and β nuclides can only be estimated roughly by scaling factors, comparing their relative ratios with the existing gamma results. To overcome the limitation of indirect measurement, a destructive sampling method has been employed to assess the contamination of the systems and component. Samples are physically taken some parts of the systems or components and subsequently analyzed in the laboratory to evaluate detailed nuclides and total contamination. For the characterization of KORI Unit-1, we conducted the radiation measurement on the exterior surfaces of components using portable instruments (Eberline E-600 SPA3, Thermo G20-10, Thermo G10, Thermo FH40TG) at BR (boron recycle system) and SP (containment spray system) in primary system. Based on these results, the ProUCL program was employed to determine the destructive sample collection quantities based on statistical approach. The total of 5 and 8 destructive sample quantities were decided by program and successfully collected from the BR and SP systems, respectively. Samples were moved to laboratory and analyzed for the detail nuclide characteristics. The outcomes of this study are expected to serve as valuable information for estimating the types and quantities of radiological waste generated by decommissioning of KORI Unit-1.

Domestic commercial low- and intermediate-level radioactive waste storage containers are manufactured using 1.2 mm thick cold-rolled steel sheets, and the outer surface is coated with a thin layer of primer of 10~36 μm. However, the outer surface of the primer of the container may be damaged due to physical friction, such as acceleration, resonance, and vibration during transportation. As a result, exposed steel surfaces undergo accelerated corrosion, reducing the overall durability of the container. The integrity of storage containers is directly related to the safety of workers. Therefore, the development of storage containers with enhanced durability is necessary. This paper provides an analysis of mechanical properties related to the durability of WC (tungsten carbide)-based coating materials for developing low- and intermediate-level radioactive waste storage containers. Three different WC-based coating specimens with varied composition ratios were prepared using HVOF (high-velocity oxy-fuel) technique. These different specimens (namely WC-85, WC-73, and WC-66) were uniformly deposited on cold-rolled steel surfaces ensuring a constant thickness of 250 μm. In this work, the mechanical properties of the three different WCbased coaitng materials evaluated from the viewpoints of microstructure, hardness, adheision force between substrate and coating material, and wear resistance. The cross-sectional SEM-EDS (Scanning Electron Microscope-Energy Dispersive X-ray Spectroscopy) images revealed that elements W (tungsten), C (carbon), Ni (nickel), and Cr (chromium) were uniformly distributed within the each coating layers which was approximately 250 μm thick. The average hardness values of HWC-85 and HWC-73 were found to be 1,091 Hv (Vickers Hardness) and 1,083 Hv, respectively, while the HWC-66 exhibited relatively lower hardness value of 883 Hv. This indicates that a higher WC content results in increased hardness. Adhesion force between and substrates and coating materials exceeded 60 MPa for all specimens, however, there were no significant differences observed based on the tungsten carbide content. Furthermore, a taber-type abrasion tester was used for conducting abrasion resistance tests under specific conditions including an H-18 load weight at 1,000 g with rotational speed set at 60 RPM. The abrasion resistance tests were performed under ambient temperatures (RT: 23±2°C) as well as relative humidity levels (RH: 50±10%). Currently, the ongoing abrasion resistance tests will include some results in this study.

This study focuses on the development of coatings designed for storage containers used in the management of radioactive waste. The primary objective is to enhance the shielding performance of these containers against either gamma or neutron radiation. Shielding against these types of radiation is essential to ensure the safety of personnel and the environment. In this study, tungsten and boron cabide coating specimens were manufactured using the HVOF (High-Velocity Oxy Fuel) technuqe. These coatings act as an additional layer of protection for the storage containers, effectively absorbing and attenuating gamma and neutron radiation. The fabricated tungsten and boron carbide coating specimens were evaluated using two different testing methods. The first experiment evaluates the effectiveness of a radiation shielding coating on cold-rolled steel surfaces, achieved by applying a mixture of WC (Tungsten Carbide) powders. WC-based coating specimens, featuring different ratios, were prepared and preliminarily assessed for their radiation shielding capabilities. In the gamma-ray shielding test, Cs-137 was utilized as the radiation source. The coating thickness remained constant at 250 μm. Based on the test results, the attenuation ratio and shielding rate for each coated specimen were calculated. It was observed that the gammaray shielding rate exhibited relatively higher shielding performance as the WC content increased. This observation aligns with our findings from the gamma-ray shielding test and underscores the potential benefits of increasing the tungsten content in the coating. In the second experiment, a neutron shielding material was created by applying a 100 μm-thick layer of B4C (Boron Carbide) onto 316SS. The thermal neutron (AmBe) shielding test results demonstrated an approximate shielding rate of 27%. The thermal neutron shielding rate was confirmed to exceed 99.9% in the 1.5 cm thick SiC+B4C bulk plate. This indicates a significant reduction in required volume. This study establishes that these coatings enhance the gamma-ray and neutron shielding effectiveness of storage containers designed for managing radioactive waste. In the future, we plan to conduct a comparative evaluation of the radiation shielding properties to optimize the coating conditions and ensure optimal shielding effectiveness.

The purpose of this study is to determine the concepts of heterotopic image and fashion space, and the characteristics of fashion space and images from the perspective of fashion brands and users. This study examines the evolution of fashion space and consumers with it, based on Foucault’s theory of heterotopia, which refers to spaces that blend contradictory features not typically found within a single physical structure. This is accomplished by employing a single case study of Ader Error’s Ader Space, a Seoul-based brand known for its unique approach to presenting and communicating fashion. Based on an analysis of Instagram posts of Ader Error along with the hashtag searches “aderspace” and “adererror”, this study categorizes heterotopia from the perspective of fashion brands into three properties: fashion space as a medium for selling fashion products; fashion space as getaway to hybrid fashion practices; and fashion space as an illusionary place to experience fashion. From the user perspective, the heterotopic image of Ader Space portrayed on Instagram is characterized by the image of fashion products in an extraordinary fashion space, the image of a fashion space beyond space and time, and the image of exposing the hidden and the illusioncompensation of fashion space. This study contributes to a heightened understanding of the evolutionary concept of the fashion space.

Natural uranium-contaminated soil in Korea Atomic Energy Research Institute (KAERI) was generated by decommissioning of the natural uranium conversion facility in 2010. Some of the contaminated soil was expected to be clearance level, however the disposal cost burden is increasing because it is not classified in advance. In this study, pre-classification method is presented according to the ratio of naturally occurring radioactive material (NORM) and contaminated uranium in the soil. To verify the validity of the method, the verification of the uranium radioactivity concentration estimation method through γ-ray analysis results corrected by self-absorption using MCNP6.2, and the validity of the pre-classification method according to the net peak area ratio were evaluated. Estimating concentration for 238U and 235U with γ-ray analysis using HPGe (GC3018) and MCNP6.2 was verified by 􀟙-spectrometry. The analysis results of different methods were within the deviation range. Clearance screening factors (CSFs) were derived through MCNP6.2, and net peak area ratio were calculated at 295.21 keV, 351.92 keV(214Pb), 609.31 keV, 1120.28 keV, 1764.49 keV(214Bi) of to the 92.59 keV. CSFs for contaminated soil and natural soil were compared with U/Pb ratio. CSFs and radioactivity concentrations were measured, and the deviation from the 60 minute measurement results was compared in natural soil. Pre-classification is possible using by CSFs measured for more than 5 minutes to the average concentration of 214Pb or 214Bi in contaminated soil. In this study, the pre-classification method of clearance determination in contaminated soil was evaluated, and it was relatively accurate in a shorter measurement time than the method using the concentrations. This method is expected to be used as a simple pre-classification method through additional research.

The decommissioning of Korea Research Reactor Units 1 and 2 (KRR-1&2), the first research reactors in South Korea, began in 1997. Approximately 5,000 tons of waste will be generated when the contaminated buildings are demolished. Various types of radioactive waste are generated in large quantities during the operation and decommissioning of nuclear facilities, and in order to dispose of them in a disposal facility, it is necessary to physico-chemically characterize the radioactive waste. The need to transparently and clearly conduct and manage radioactive waste characterization methods and results in accordance with relevant laws, regulations, acceptance standards is emerging. For radioactive waste characterization information, all information must be provided to the disposal facility by measuring and testing the physical, chemical, and radiological characteristics and inputting related documents. At this time, field workers have the inconvenience of performing computerized work after manually inputting radioactive waste characterization information, and there is always a possibility that human errors may occur during manual input. Furthermore, when disposing of radioactive waste, the production of the documents necessary for disposal is also done manually, resulting in the aforementioned human error and very low production efficiency of numerous documents. In addition, as quality control is applied to the entire process from generation to treatment and disposal of radioactive waste, it is necessary to physically protect data and investigate data quality in order to manage the history information of radioactive waste produced in computerized work. In this study, we develop a system that can directly compute the radioactive waste characterization information at the field site where the test and measurement are performed, protect the stored radioactive waste characterization data, and provide a system that can secure reliability.