Stemflow (SF) is essential for water resources within forest ecosystems and can constitute up to half of the gross rainfall (GR), depending on the forest stand structures in coniferous plantations. Although numerous studies on SF yield have been reported globally for various forest types, very few studies on SF have been reported to examine the influence of forest stand structures on SF in Korea. This study aimed to quantify the relationship between SF and forest stand structures in unmanaged Japanese cypress plantations. Two study plots were established (10 m × 10 m each) in plantations with the same stem density (SD: 2500 stems ha-1) (hereafter P1 and P2). Almost all forest stand structures (canopy projection area, tree height, diameter at breast height (DBH), number of live and dead branches, and ratio of canopy length to canopy width), including canopy volume using mobile LiDAR devices, were investigated. To evaluate the efficiency of funneling rainwater for the effect of tree biomass on SF, a funneling ratio (FR) was used. The present SF ratios (20.7% in P1 and 22.3% in P2) were much higher than those reported in previous studies of various forest types in Korea (SF ratios: 0.2–5.8% with a mean of 2.0%). This is due to the interaction between the high SD and many under-canopy dead branches. Individual-scale FR was correlated with DBH (R2 = 0.43). The present stand-scale FRs (FRstand) (22.3 in P1 and 29.2 in P2) were much higher than those reported in the previous studies (FRstand: 1.0–33.3 with a mean of 7.8) because of the negative relationship between FRstand and mean DBH (R2 = 0.78, p = 0.02). Our results provide useful information for understanding changes in SF caused by forest stand structures.
본 연구는 국내산 목재의 효율적인 이용과 이용확대를 목표로, 낙엽송, 소나무 그리고 백합나무의 도장처리에 따른 흡수성과 방사방향 및 접선방향 의 고습환경하의 팽윤율을 조사하였다. 도장처리재는 미처리재에 비해 3수종 모두 고습환경에 노출 된 후 150시간 이후의 흡수율은 작게 나타났고, 도장처리재의 흡수율은 백합나무(2.2%) > 소나무(2.1%) > 낙엽송(1.9%)의 순이었다. 고습환경에 노출된 후 150시간 이후의 함수율은 흡습량에 비례하여 증가하였고, 그 크기는 백합나무 > 낙엽송 > 소나무의 순이었으나, 소나무의 경우 양자의 차이가 적은 것이 확인되었다. 도장처리재의 방사방향 팽윤율은 2.18% - 3.44%의 범위였고, 그 크기는 낙엽송이 백합나무나 소나무에 비해 현저히 적은 값을 나타내었다. 또한, 도장처리재의 접선방향 팽윤율은 4.17% - 6.36%의 범위에 있었고, 이 값은 방사방향과 같이 낙엽송이 가장 적었고, 소나무, 백합나무의 순이었다. 이 값은 미처리재에 비하여 0.85 – 0.96배의 적은 값을 나타내었고, 방사방향의 약 1.9배 높은 값을 나타내는 것이 확인되었다.
본 연구는 낙엽활엽수종인 이팝나무(Chionanthus retusa) 잎의 흡음 성능을 평가하고자 하였다. 잎을 주재료로 하여 재료의 크기와 두께 및 건조 조건을 달리해 흡음재를 제조하였다. 중간형 측정관(100㎐-3200㎐)을 적용한 관내법(Impedance tube method)을 이용하여 흡음율을 측정하였 다. 총 18개의 조건에서 측정된 흡음율을 분석하였다. 기건엽 조건(MC 13.92%)과 생엽 조건(MC 162.04%)의 흡음율은 두께가 증가함에 따라 크게 향상되었다. 흡음율은 밀도의 증가에 비례하는데, 부피당 밀도가 더 높은 생엽조건의 두께별 흡음율이 더 높게 나타났다. 생엽 조건군에서 크기 0.5 × 0.5㎠의 2.50㎝ 두께에서 평균 흡음율은 0.643으로 가장 높게 나타났으며, 각 시험처리 조건별 흡음재의 주파수 대역별 흡음율은 기건엽 조건의 두께 1.75㎝에서 가장 높게 나타났다. 이상의 연구결과로부터 전반적인 흡음율은 1000㎐ 이상의 대역에서 더 높은 성능을 보였다.