Canine parvovirus-2 (CPV-2) has been reported worldwide as a major pathogen associated with acute hemorrhagic enteritis. The disease is a major infectious cause of death, particularly in young dogs. The earliest type of CPV-2 was replaced with three main subspecies, CPV-2a, CPV-2b, and CPV-2c, within a few years. Vaccination is carried out regularly, but the emergence of antigenic variants and the influence of maternal antibodies have limited the efficacy of commercial vaccines. New vaccines, such as the subunit vaccine, have been developed for alternative, safe, and effective vaccination. The baculovirus expression vector system (BEVS) is an excellent eukaryotic expression system with a high-level expression of foreign proteins and the ability of post-translational modification. Therefore, it is used widely to produce recombinant protein and subunit vaccines. In this study, the VP2 protein of CPV-2b cloned in the gateway vector system was generated using a baculovirus expression system in Spodoptera frugiperda (SF9) insect cells. Hemagglutination assay (HA) titers (24) were obtained, and the expression was detected in 6-His tagged VP2 and monoclonal antibody (mAb) against CPV-2 by western blotting. The VP2 protein of CPV-2b expressed in this study may provide a basis for a clinical diagnosis and vaccination applications for CPV-2.

This study investigated ethopabate (EPB) residues in edible tissues of broiler chickens given in drinking water and established the withdrawal time (WT) of EPB in poultry tissues. Twenty-four healthy Ross broiler chickens were orally administered with EPB at the concentration of 3.8 mg/L for 14 days (EPB-1, n=24) and 15.2 mg/L for 7 days (EPB-2, n=24) through drinking water, respectively. After the drug treatment, tissue samples were collected from six broiler chickens at 0, 1, 3, and 5 days, respectively. EPB residue concentrations in poultry tissues were determined using LC-MS/MS. Correlation coefficient values ranged from 0.9980 to 0.9998, and the limits of detection and quantification (LOQ) were 0.03~0.09 and 0.1~0.3 μg/kg, respectively. Mean recoveries in muscle, liver, kidney and skin/fat tissues were 95.9~109.8, 108.7~115.3, 89.9~96.6 and 86.7~96.8%, respectively, and coefficient of variations were less than 17.11%. At the end of the drug-administration period (0 day), EPB was detected at levels under the LOQ in all tissues from both the EPB-1 and EPB-2 groups. According to the results of EPB residue in Ross broiler tissues, withdrawal periods of both EPB-1 and EPB-2 in poultry tissues were established to 0 day. In conclusion, the developed analytical method is suitable for the detection of EPB in poultry tissues, and the estimated WT of EPB in poultry tissues will contribute to ensuring the safety of Ross broiler chickens.

현재까지 전세계적으로 Periphyllus allogenes (개성진사진딧물)은 무시성충세대에 대한 형태학적 정보만이 보고되었다. 본 연구에서는 2021 년부터 2022년까지 한국 가평군, 홍천군에서 그동안 P. allogenes의 알려지지 않았던 간모, 유시성충 세대를 채집하여, 이들에 대하여 형태학적 정 보, 분포지역, 기주식물, 생태 사진을 처음으로 보고한다.

Due to the rapid development of technology, the environment is rapidly changing, and new regulations are emerging in the global society. In addition, environmental and social problems such as the pandemic and deepening social polarization have intensified, and the international community and investors have begun to regard ESG as a key factor in decision making. Regulations and systems reflecting ESG elements, such as the Carbon Neutral Act to cope with environmental problems and the Serious Disaster Act to cope with social problems, have already been enacted and implemented in major countries such as the EU and the Republic of Korea. In particular, the EU is pushing to publish ESG disclosure standards and make ESG disclosure mandatory next year. Given this trend, companies should consider ESG management as their business key strategy, as well as consumer characteristics and regulation.

Despite the importance of technology-based innovation and customer participation for both practitioners and academics, the impact of different customer participation types in new product innovation has rarely been addressed. Since consumers' positive assessment of new technologies leads to positive outcomes in the market, consumer evaluation of new technologies is important. Thus, examining the consumer perception of technology-based innovation including the different levels of customer participation is meaningful to new theoretical and practical insights.

From 2020, Korean Animal and Plant Quarantine Agency has reset the withdrawal time (WT) for veterinary drugs typically used in livestock in preparation for the introduction of positive list system (PLS) program in 2024. This study was conducted to reset the MRL for amprolium (APL) in broiler chickens as a part of PLS program introduction. Forty-eight healthy Ross broiler chickens were orally administered with APL at the concentration of 60 mg/L (APL-1, n=24) for 14 days and 240 mg/L (APL-2, n=24) for 7 days through drinking water, respectively. After the drug treatment, tissue samples were collected from six broiler chickens at 0, 1, 3 and 5 days, respectively. Residual APL concentrations in poultry tissues were determined using LC-MS/MS. Correlation coefficient (0.99 >), the limits quantification (LOQ, 0.3~5.0 μg/kg), recoveries (81.5~112.4%), and coefficient of variations (<15.5%) were satisfied the validation criteria of Korean Ministry of Food and Drug Safety. In APL-1, APL in all tissues except for kidney was detected less than LOQ at 3 days after drug treatment. In APL-2, APL in liver and kidney was detected more than LOQ at 5 days after treatment. According to the European Medicines Agency’s guideline on determination of withdrawal periods, withdrawal periods of APL-1 and APL-2 in poultry tissues were established to 3 and 2 days, respectively. In conclusion, the developed analytical method is sensitive and reliable for detecting APL in poultry tissues. The estimated WT of APL in poultry tissues is longer than the current WT recommendation of 2 days for APL in broiler chickens.

본 연구는 신생아 검사 중 포수클로랄(chloral hydrate)을 투여 후 진행되는 신생아 진정 검사 대비 진정 대체 방식 중 하나인 피드 및 랩(feed and wrap) 방식의 유용성을 평가한 연구이다. 본 연구에선 진정으로 진행한 신생아의 두뇌 T2 축면 영상과 피드 및 랩 방식으로 진행한 같은 영상 각 30개의 운동 허상(motion artifact)과 백질과 회백질의 구분 정도를 두 명의 영상의학과 전문의가 정성적으로 평가하였고, 운동 허상을 측정하기 위해서 위상부호화(phase encoding) 방향의 배경 영역(background area)의 평균 신호 강도(mean signal intensity)를 구하여서 정량적 방식으로 평가하였다. 또한 총검사 시간을 정리한 뒤 정량적 방식으로 평가하였고 투약 기록의 여부와 간호일지를 토대로 피드 및 랩 방식의 총 39건의 검사 건수 대비 성공률을 측정하였다. 운동 허상의 정량적 평가와 영상 품질의 정성적 평가 모두에서 두 집단은 유의미한 차이가 없었으나, 검사 시간의 정량적 평가에선 p값이 0.001로 유의한 차이가 있었다. 피드 및 랩 방식의 총검사 건수 대비 성공률은 100%였다. 결론적으로 본 논문에선 피드 및 랩 방식과 진정 방식의 영상 품질이 유의한 차이가 없고 성공률이 높기에 유용하다고 판단하였으나, 검사 시간이 더 지연되는 한계가 있다는 사실을 확인하였다.

Mass production of high-quality carbon nanotubes (CNTs) remains a challenge, requiring the development of new wetimpregnated catalyst suitable for the catalytic chemical vapor deposition (CCVD) of CNTs in a fluidized bed reactor. For the successful development of a new catalyst, a highly robust system to synthesize CNTs must be established. Here, we systematically investigated the robustness of CNT synthesis by CCVD using a wet-impregnated catalyst. We statistically tested four factors that could potentially affect the robustness of CNT synthesis system, focusing on carbon yield and IG/ID. First, we tested the effect of vacuum baking before CNT growth. F test and CV equality test concluded that vacuum baking recipe did not significantly reduce the variability of the CNT synthesis. Second, we tested the batch-to-batch variation of catalysts. The results of t test and one-way analysis of variance indicate that there is significant difference in carbon yield and IG/ID among catalysts from different batches. Third, we confirmed that there is spatial non-uniformity of wet-impregnated catalysts within a batch when they are produced in large scale. Finally, we developed a multi-step heating recipe to mitigate the temperature overshooting during the CNT synthesis. The multi-step recipe increased the mean of carbon yield, but did not influence the variability of CNT synthesis. We believe that our research can contribute to the establishment of a robust CNT synthesis system and development of new wet-impregnated catalysts.

A low- and intermediate-level radioactive waste repository contains different types of radionuclides and organic complexing agents. Their chemical interaction in the repository can result in the formation of radionuclide-ligand complexes, leading to their high transport behaviors in the engineered and natural rock barriers. Furthermore, the release of radionuclides from the repository can pose a significant risk to both human health and the environment. This study explores the impact of different experimental conditions on the transport behaviors of 99Tc, 137Cs, and 238U through three types of barrier samples: concrete, sedimentary rock, and granite. To assess the transport behavior of the samples, the geochemical characteristics were determined using X-ray diffraction (XRD), X-ray fluorescence (XRF), Fouriertransform infrared spectroscopy (FTIR), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS), and Brunauer-Emmett-Teller (BET) analysis. The adsorption distribution coefficient (Kd) was used as an indicator of transport behavior, and it was determined in batch systems under different conditions such as solution pH (ranging from 7 to 13), temperature (ranging from 10 to 40°C), and with the presence of organic complexing agents such as ethylenediaminetetraacetic acid (EDTA), nitrilotriacetic acid (NTA), and isosaccharinic acid (ISA). A support vector machine (SVM) was used to develop a prediction model for the Kd values. It was found that, regardless of the experimental parameters, 99Tc may migrate easily due to its anionic property. Conversely, 137Cs showed low transport behaviors under all tested conditions. The transport behaviors of 238U were impacted by the order of EDTA > NTA> ISA, particularly with the concrete sample. The SVM models can also be used to predict the Kd values of the radionuclides in the event of an accidental release from the repository.

In response to a regulatory mandate, all nuclear licensees are obligated to establish an information system that can provide essential information in the event of a radiation emergency by connecting the monitoring data of the Safety Parameter Display System (SPDS) or equivalent system to the Korea Institute of Nuclear Safety (KINS). Responding to this responsibility, the Korea Atomic Energy Research Institute (KAERI) has established the Safety Information Transmission System (SITS), which enables the collection and real-time monitoring of safety information. The KAERI monitors and collects safety information, which includes data from the HANARO Operation Work Station (OWS) and the HANARO & HANARO Fuel Fabrication Plant (HFFP) Radioactivity Monitoring System (RMS), and the Environmental Radiation Monitoring System (ERMS) & meteorological data. Currently, the transmission of this safety information to the AtomCARE server of the KINS takes place via the SITS server located in the Emergency Operations Facility (EOF). However, the multi-path of transmission through SITS has caused problems such as an increase in data transmission interruptions and errors, as well as delays in identifying the cause and implementing system recovery measures. To address these issues, a new VPN is currently being constructed on the servers of nuclear facilities that generate and manage safety information to establish a direct transmission system of safety information from each nuclear facility to the AtomCARE server. The establishment of a direct transmission system that eliminates unnecessary transit steps is expected to result in stable information transmission and minimize the frequency of data transmission interruptions. As of the improvement progress, a security review was conducted in the second and third quarters of 2022 to evaluate the security of newly introduced VPNs to the nuclear facility server, and based on the results of the review, security measures were strengthened. In the fourth quarter of 2022, the development of a direct transmission system for safety information began, and it is scheduled to be completed by the fourth quarter of 2023. The project includes the construction of the transmission system, system inspection, and comprehensive data stability testing. Afterward, the existing SITS located in the EOF will be renamed as the Safety Information Display System (SIDS), and there are plans to remove any unused servers and VPNs.

In this study, we evaluate artificial neural network (ANN) models that estimate the positions of gamma-ray sources from plastic scintillating fiber (PSF)-based radiation detection systems using different filtering ratios. The PSF-based radiation detection system consists of a single-stranded PSF, two photomultiplier tubes (PMTs) that transform the scintillation signals into electric signals, amplifiers, and a data acquisition system (DAQ). The source used to evaluate the system is Cs-137, with a photopeak of 662 keV and a dose rate of about 5 μSv/h. We construct ANN models with the same structure but different training data. For the training data, we selected a measurement time of 1 minute to secure a sufficient number of data points. Conversely, we chose a measurement time of 10 seconds for extracting time-difference data from the primary data, followed by filtering. During the filtering process, we identified the peak heights of the gaussian-fitted curves obtained from the histogram of the time-difference data, and extracted the data located above the height which is equal to the peak height multiplied by a predetermined percentage. We used percentage values of 0, 20, 40, and 60 for the filtering. The results indicate that the filtering has an effect on the position estimation error, which we define as the absolute value of the difference between the estimated source position and the actual source position. The estimation of the ANN model trained with raw data for the training data shows a total average error of 1.391 m, while the ANN model trained with 20%-filtered data for the training data shows a total average error of 0.263 m. Similarly, the 40%-filtered data result shows a total average error of 0.119 m, and the 60%-filtered data result shows a total average error of 0.0452 m. From the perspective of the total average error, it is clear that the more data are filtered, the more accurate the result is. Further study will be conducted to optimize the filtering ratio for the system and measuring time by evaluating stabilization time for position estimation of the source.